Used Hydraulic Shear Fasti 509-30-6 for sale (73,626)

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Mechanically adjustable rear stop (2 speeds) up to 1000 mm with analog display Side stops and table extensions Ndedpfx Agezl Dr Ssrsb cutting length limitation Cutting edge lighting knife sharpened Weight approx. 5500 kg

Condition: used, Year of construction: 1994, Max. Cutting length: 3040 mm Max. sheet thickness: 6 mm steel Controlled back stop up to 1000 mm Side stops and table extensions Hydraulic shear angle adjustment cutting length limitation Nsdpfoz Et Slex Agrodb Cutting edge lighting knife sharpened Weight approx. 6500 kg

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Ndjdpfx Aof Nwvfogreb

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws Nodpot Ucgajfx Agrodb - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Ndjdpfx Agjzi Uq Horob Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: used, Year of construction: 1992, Max. cutting length: 1250 mm Ndodoy Dcdtspfx Agreb Max. sheet thickness: 4 mm steel Controlled rear stop Side stops and table extensions cutting length limitation Cutting edge lighting Light barrier for safeguarding the rear area knife sharpened Weight approx. 2800 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 21780, control type: CNC control, actuation type: hydraulic, back gauge: 750 mm, overall weight: 4,500 kg, total length: 3,800 mm, total width: 1,650 mm, total height: 1,750 mm, number of support arms: 1, warranty duration: 12 months, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HACO HSLX 3006 in new condition Equipped with a new set of blades and a new control system. Technical condition: Excellent Capacity for regular steel: 6 mm (400 N/mm2) Length of back gauge: 750 mm Control system: SC 101 (NEW) Max. cutting angle: 3.0° Number of clamps: 18 Strokes per minute at smallest angle: 14 Strokes per minute at largest angle: 8 Working height: 770 mm Motor power: 7.5 kW Total length: 3800 mm Nedozxgu Njpfx Agrsdb Total height: 1750 mm Total width: 1650 mm Total width with CE guarding: 2700 mm Weight approx. 4500 kg Year of construction: 2010 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: excellent (used), Year of construction: 1985, guillotine shear with rear stop and stacker design: hydraulic cutting length: max. 3.000 mm cutting length (stackable): max. 1.000 mm cutting thickness: max. 6 mm Ndsdpfx Agozdnx Horob

Condition: good (used), functionality: fully functional, Year of construction: 1994, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of Manufacture: December 1993 / January 1994 Technical Data Ndsdpfx Ajz Aqx Togrsb Manufacturer: Fasti Type: 212-20-6 Year of Manufacture: December 1993 / January 1994 Useful length: 2040 mm Sheet thickness: 6 mm Stroke: 500 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a push button and digital display - Controlled rear stop, 1000 mm with ball bearings, extendable to 1500 mm - 2 x sharp edge rails, 45° - 1 x sharp edge rail, 30° - Bending rails 16, 35, 10, 12, 15 mm - Gooseneck rail H 130 mm, segmented All information is without guarantee. The machine is characterized above all by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2015, gebraucht 2015 090243 prompt, Zwischenverkauf v Türkei 21800 € 1 3100 mm 6 mm 4 mm 15 1/min 1.5 ° Ndsdpfxoz Drbcs Agrjb 1000 mm 15 kW 200 l 4110 mm 2200 mm 3790 mm 2100 mm 7300 kg WITH PNEUMATIC SHEET SUPPORT Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMANwith EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2002, For sale: a professional hydraulic guillotine, AMADA PROMECAM GX 630, manufactured in 2002. Reliable industrial guillotine shears designed for precise sheet metal cutting. Maximum cutting length: 3050 mm, steel thickness: up to 6 mm. The machine is connected and fully operational; it can be inspected, tested, and trial cuts can be performed. New cutting blades were replaced approximately two years ago. The guillotine cuts accurately and cleanly. Key Information: Manufacturer: AMADA PROMECAM Model: GX 630 Year of Manufacture: 2002 Serial Number: C020110 Working Length: 3050 mm Max. Steel Thickness: 6 mm Ndjdpfxsz A Amgo Agrjb Cutting Force: 197 kN Power: 5.5 kW / 7.5 HP Power Supply: 400–415 V / 50 Hz Current: 16 A NC Control and Back Gauge The machine is equipped with an AMADA NC controller, allowing the operator to set the required cutting dimension and the number of cuts. The programmable back gauge, up to 1000 mm, automatically adjusts to the required position, making it convenient to perform repetitive cuts of the same size. Equipment: AMADA NC control system Programmable back gauge up to 1000 mm Hydraulic sheet clamping system Adjustable blade gap according to the thickness of the sheet being cut Front table extension for large sheets Front sheet support Foot pedal control New cutting blades, replaced approximately 2 years ago The machine is connected and fully operational; it can be inspected and tested. If you have any further questions, please do not hesitate to ask.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 100 h, Equipment: type plate available, Amada GS II 630 EVO sheet metal shear model year 2018, Working width 3050mm, max sheet thickness steel 40-45kg/mm2/6.35mm Max. sheet thickness stainless steel 60kg/mm2/4mm, aluminum max. sheet thickness 30kg/mm2/8mm. Accessories Side guide front stop beam 1m, Front stop beam 1m 2pcs, Standard lever stop 2pcs, Ball support 1.5m 3pcs. Cutting quantity 15,000 times. Pump operating hours 100h. Very little used Nedpfx Agsziviwsrjdb

Condition: used, Year of construction: 1994, sheet width 3050 mm plate thickness 16 mm distance between columns 3050 mm 15-1000 mm cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 30 kW weight of the machine ca. 14,.5 t dimensions of the machine ca. 4,0 x 260 x 2,55 m Nodpfx Ajxz Hg Djgrsdb Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: C 97 12 06, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,050 mm, overall weight: 6,500 kg, number of support arms: 2, Equipment: angle stop, Hydraulic shear – AMADA, GPX 630 model. Cutting length: 3100 mm x 6 mm, fully CNC controlled. Adjustable blade angle and blade gap, set by the computer after entering the material thickness and length. Sheet metal cutting range: 0.4 - 6 mm. CNC back gauge with a travel distance of 10 - 1050 mm, retraction, and programmable. Machine with automatic support for long sheets of cut metal at the rear. Raising and lowering rear back gauge. Machine weight: 6.5 tons. 2 supports and a square bar at the front of the machine. The shear is regularly serviced. The machine has been used sporadically for the past 10 years. Service documentation and the machine manual are available. Nsdpfxozdzkco Agrsdb If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, functionality: fully functional, Year of construction: 2008, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, The machine is in good condition, fully functional, and can be tested on site. Ndedpfx Agjzkgf Eoreb

Condition: used, Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal holding Nodpfx Agew Hygderedb Side stops and table extensions cutting length limitation Cutting edge lighting Weight approx. 7500 kg

Condition: used, Year of construction: 1991, Panel shear Fasti, manufactured in 1991. Ndodszu Itlepfx Agreb

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Ndjdpfx Aoyypb Rogreb Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used 3-meter plate shearing machine by Durma Ndedpfx Ajz Ernrsgrsb Type: SBF 3006 Capacity: 3100 x 6 mm Electric back gauge Year of manufacture: 2013

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 14 1/min, stroke rate (max.): 14 1/min, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,380 kg, total length: 3,840 mm, total width: 1,675 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 6 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 6 mm Maximum cutting length: 3200 mm Blade rake angle: fixed −2° Number of strokes per minute: 14 Nedpfx Agoyt E Ekjredb Back gauge travel: 20–600 mm (standard) Distance between side frames: 3450 mm Table height: 800 mm Motor power: 7.5 kW Weight: 7380 kg Machine dimensions (L × W × H): 3840 × 1675 × 1620 mm Equipment: Controller E21 Motorized back gauge Back gauge with ball screws Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Digital readout of the back gauge position Blade gap adjustment Set of blades Ball transfer units on the table 3 front support arms Front gauge with measuring scale Rear safety guard Front safety guard Illuminated cutting line Foot pedal CE declaration of conformity Manual in Polish Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 69584, Offer 26220 Ndodpfx Agszuzrboreb Technical Data: - Cutting length 3050 mm - Cutting thickness at 400 N/mm² tensile strength 16 mm - Cutting thickness at 400 N/mm² tensile strength up to 1000 mm length 18 mm - Cutting angle 0.5 - 3 ° - Number of sheet metal clamps 18 pcs - Stroke rate 10 - 23 min - Motorized back gauge up to 1000 mm - Rear guard with light curtain - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet metal thickness in mm - Automatic cutting angle adjustment based on sheet metal thickness - Cutting length limitation - Automatic positioning of the back gauge (8 programs – 80 steps) with - Digital display and automatic retraction of the back gauge - Drive 400 V / 22 kW - E - Foot pedal - Space requirement without support arms approx. W 4500 x H 2250 x D 2200 mm - Weight approx. 14500 kg

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms Nedpfx Agsxabd Uoredb - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW Njdpfoxabvqjx Agrjdb weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, Bernardo Hydraulic Guillotine Shear HST 1300 x 6 Technical Specifications Cutting length: 1300 mm Max. sheet thickness*: 6 mm Cutting angle: 2° Motorized backgauge: 0 – 700 mm Strokes / min: 16 Number of hold-downs: 1 pc. Table height: 850 mm Support arms: 3 pcs. Oil tank: 60 liters Motor power: 5.5 kW Length: 2070 mm Depth: 2040 mm Height: 1365 mm Weight: approx. 2020 kg * Material strength: 400 N/mm² Features • High reliability, safety, and cost-effectiveness • Robust, welded steel frame for torsion-free operation • Precise work thanks to integrated cutting line illumination with shadow outline • High operator safety via protective cover and photocells at the rear of the machine • Efficient cutting of various materials such as steel sheet, brass, aluminum, copper, etc. • Cutting via foot pedal, keeping hands free for optimal sheet positioning • Front support arms for easy handling of large plates • Simple gap adjustment via side-mounted lever • Table support surface with integrated rollers, ideal for large workpieces • Automatic hold-down device for fixing the sheet Scope of Delivery Ndjdpfx Agoyg Hxfjreb • Cutting gap adjustment • Cutting line illumination • Motorized NC backgauge • Front sheet supports • Table support with integrated rollers • Side stop • Protective guard with photocells • NC control E21S • Foot pedal with emergency stop • Tool steel blades

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, MORGAN RUSHWORTH GUILLOTINE MODEL HSGS 3100 X 6 MM CNC CONTROL - CYBELEC CYBTOUCH 6 YEAR 2016 FRONT AND REAR GUARDS SQUARING ARM FRONT SUPPORTS BLADES EXCELLENT BLADE GAP IN EXCELLENT CONDITION , ONLY USED ON LIGHT MATERIAL SINCE NEW Nodpfxjz Ehtws Agrsdb CAN BE VIEWED AT OUR WORKS OR A VIDEO CAN BE SENT