Used Hydraulic Systems for sale (45,889)

Condition: used, Year of construction: 2018, Manufacturer: ONI, Year of manufacture: 2018, Serial no. 181626, Container dimensions: 8,000 x 3,000 x 3,000 mm, 3 pumps, Manufacturer: KSB, Type: ETB (heat recovery/hydraulic cooling/free cooling), Free cooler 500 kW (roof-mounted), 10 fans with adiabatic cooling, L/W/H 9,930 x 2,290 x 1,510 mm, Water treatment system with plastic tank 2 x 3,000 liters, Water softener, 7 heat recovery units, Type SW25, Heating capacity 25 kW, Air volume flow 6,000 m³/h, 4 with door air curtain nozzles, 2 air heaters, Type SW1 (office area), Pump and valve group for heat recovery circuit, Heating element, 200 W, System control: Siemens Simatic S7, Touch panel HMI +++ Attention: This system is part of an online auction! +++ Ledpfx Aszn Atasmterp

Condition: used, Used hydraulic pump system with 4 pumps and an approximately 200-liter reservoir, including a collection basin. Ledpozi Sn Aofx Amtjrp

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton Lredpfx Amsvgu Haotjp -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Condition: used, New: No Part suitable for: trucks General condition: good Technical condition: good Optical condition: good Lsdpfx Amewwtkwetjrp VAT/differential taxation: VAT deductible

Condition: used, New: No Part suitable for: trucks Lrjdowuy Abjpfx Amtop VAT/margin scheme: VAT deductible Type number: 2022876/2347769

Condition: ready for operation (used), Bridge Lifting Power Unit,Structural lifting system,Hydraulic lifting unit, 1000-ton hydraulic cylinder, Used Machine Manufacturer: Bucher Hydraulics Type: QX24-008R ; PHHET Overall dimensions: Width: 1420 mm Depth: 860 mm Height: 1770 mm Lsdpfeyr Ihrsx Amtsrp Operating pressure: 350 bar Year of manufacture: 2017 Weight: 850 kg Electrical data: 400 V; 11 kW; 20 A Hydraulic Cylinders: 1. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm 2. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm

Condition: used, New: No General condition: very good Technical condition: very good Visual appearance: very good Production country: CH Please contact Vink Machinery for more information Menzi Muck Cylinders Lodsx Aiy Nspfx Amterp * Double-acting * Equipped with two non-return valves * Cylinder diameter: 60 mm * The cylinder eye is 50 mm internal * Retracted center-to-center distance: 700 mm * Extended center-to-center distance: 1070 mm * Price is per unit!

Condition: used, Used special-purpose plant, built by ECKOLD (Special machine with superstructure for punch rivet brackets) Custom-built as a component feeder. Pictures of the components and motors. Motor brand: Behncke, 5.5 kW Lredjzc Ec Ujpfx Amtsp Rated power: 8.5 kW Hydraulic unit brand: FluTec, year 1999

Condition: like new (used), Compact pump unit with an LP-type pneumatic hydraulic pump. P max= 590 bar Application: Hydraulic control Width: 200 mm Height: 360 mm Depth: 255 mm Weight: 12.1 kg Lrodpfxey Uh Tzo Amtjp Condition: Like new

Condition: excellent (used), I am offering professional HURST hydraulic spreaders – Jaws of Life – used in technical rescue operations (fire departments, emergency services). Equipment from the renowned brand HURST Rescue Systems (USA) – a market leader in hydraulic rescue tools. Lrsdpoyxta Ijfx Amtep Condition: - Fully operational and tested equipment. - Completely functional – ready for immediate use. - Displays normal signs of use (scuffs, marks – visible in the photos), which do not affect performance. Details: Manufacturer: HURST Rescue Systems Type: Hydraulic spreaders Application: Technical rescue, fire brigade Hydraulic quick couplings included Set includes: 2x HURST hydraulic spreaders Hydraulic hoses as shown in photos Applications: - Fire brigade (volunteer/professional) - Road rescue operations - Hydraulic power systems - Workshop and service operations. PRICE LISTED IS FOR 1 PIECE.

Condition: used, Hydraulic horizontal clamp Ljdpfx Amjy Ud Rpstorp

Year of construction: 1997, condition: excellent (used), Hydraulic system - clamping hydraulics For tool clamping - Clamping device Make:BACHOFEN HYDRAULIK Type:HA3B-L1/90 Year.15/1997 Tank : 3 L Clamping pressure :90 Bar Ljdpfsmx Slzjx Amterp In very good condition .

Condition: used, for shifting of heaviest loads total thrust 400 to - 4 x 100 to cylinder stroke approx. 1,000 mm double-acting hollow piston cylinders drawbars 9 x 6,000 mm, 1 x 5,000 mm Ljdpfeivbb Njx Amtsrp operating pressure up to 400 bar tank capacity approx. 500 litres operation by cable remote control electrical data 400 V / 2 x 30 KW  

Year of construction: 2019, condition: ready for operation (used), A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000. Lsdpfx Amst Daq Uotsrp

Year of construction: 2021, operating hours: 30 h, condition: like new (used), functionality: fully functional, 1 x Unifiller Systems Inc. food depositor mounted on a mobile height-adjustable frame. This is a compact, versatile machine which is easy to clean for a quick product changeover. Handles most fillings without particulates Manufacturer - Unifiller Systems Inc. Model - iSpot. Serial number - ISP103177-001-01. Date of manufacture - 2021. Depositing range - 35ml to 237ml (2'' cyclinder). Ledjyv E Ryjpfx Amtjrp Speed - adjustable, up to 150 deposits / minute depending on product type and volume. Operating temperature - up to +60C. Fits containers up to 23” deep (80 quart Hobart bowl). Condition - full working order and excellent condition for its age. Used sporadically over a period of around 5 months and is believed to have had less than 30 hours of run time.

Condition: used, Item: A-2600-UF-Microfiltration-Block UF- /Microfiltration Block (Alcalase) 4 X 38-42 m2 Lrjdokyu Avopfx Amtsp DOW Separation Systems inclusive pumps, tubes and other accessories. To offer 6 pieces identical

Condition: used, Turbo Systems D150P Filling Machine This mobile filling machine has been specifically designed for the food processing industry. It enables fast, accurate, and reliable filling of consistent portions of the same size. It is ideal for filling purees, creams, sauces, dairy products, yogurt, and other semi-liquid products into trays, cans, jars, or bottles. The filling machine can be used either as an in-line unit or as a stand-alone machine. It can be quickly and easily disassembled, resulting in a short cleaning time. Both the suction and filling times are continuously adjustable. The portioning machine is manufactured entirely from stainless steel. Technical Specifications: - Production capacity: Up to 60 cycles/min (depending on settings) - Filling range: Approx. 30 mL – 180 mL - Mounted on a mobile, height-adjustable stainless steel frame - Voltage: 230 V (1+N, 50 Hz) - Power: 0.25 kW - Weight: 115 kg - Year of manufacture: 2008 - Compressed air requirement: 3–6 bar - Machine dimensions (W × D × H): 1,160 × 640 × 1,870 mm Ljdpfozn I E Iex Amtjrp

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel Lsdpfxszn Ipys Amtjrp • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Condition: used, Year of construction: 2012, Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Lrjdpfx Amer Dwbgstsp Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Communication Optional DeviceNet, Profibus MTBF > 71,949 hours at 30° C Conformity UL, cUL, CE, FCC (Class A), 21CFR1040, IEC-60825-1 Year of manufacture 2012 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: used, Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Ljdpfok Aa Dwjx Amtorp Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Delivery in Germany (without Islands): free incl. mains cable without software Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Lrjdpeynnlisfx Amtep Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: good (used), A good used linear weigher with Digiway controls - this machine is a single head weigher with 4 vibratory feed trays - loadcell technology and Digiway controls for fast accurate weighing and filling or granular free flowing products. Lrodpfx Amju U Ai Hotsp

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Lrodpexd Thmjfx Amtjp Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Lodpfx Amezbkl Sjterp Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. Ljdpfx Amoznlbgoterp The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The line is also equipped with a combined metal detector and checkweigher for automatic detection and rejection of metal contamination and underfilled or overfilled packages, ensuring consistent product quality and compliance with food safety standards. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. If you have any questions or need more information, feel free to send us a message or give us a call.