Used Hyster H4.00Xm Mit Zwillingsreifen for sale (6,874)

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) Fgedez Ipdvspfx Afueh ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Fjdpoz Ehfajfx Afusgh Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Fgsdezt Ai Ejpfx Afush Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. Fsdpjwcgr Esfx Afuogh FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Fgsdpfx Aez Ipunofujh Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: excellent (used), functionality: fully functional, mileage: 420,000 km, gearing type: semi-automatic, fuel type: diesel, MAN TGS with Fassi 1300 T/M crane New TÜV and UVV inspection certificates Tires in good condition Vehicle has been partially repainted and is rust-free Semi-automatic transmission Fgjdpfx Afez Ii Uhsueh 480,000 km

Year of construction: 2006, condition: ready for operation (used), fuel type: diesel, Vehicle Description Diesel forklift MITSUBISHI FD35N Year of manufacture: 2006 According to the hour meter: 13,347 hours 3.5-ton lifting capacity 2.45-meter overall height Fedpfx Aoi Dnqkjfuogh 3.70-meter lifting height 42.3 kW Mitsubishi engine - Full-view mast - Wide fork carriage - Twin tires - Side shifter - Lighting system - Original paint - Ready for immediate use Selling price: €10,500.00 net Affordable delivery options also available!

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 2,794 h, load capacity: 4,000 kg, lifting height: 6,200 mm, fuel type: gas, mast type: simplex, construction height: 4,000 mm, fork carriage width: 1,400 mm, empty load weight: 6,846 kg, total length: 3,050 mm, drive type: Treibgas, construction width: 1,400 mm, LPG Forklift Load Center of Gravity: 600 Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Very good Front Tires Type: Super Elastic Front Tire Size: 2.50-15 Rear Tires Type: Super Elastic Rear Tire Size: 7.00-12 Fjdpowacb Dsfx Afujgh Description: In addition to this Hyster model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire-purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this H4.00XMS-6. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We'd be happy to display your vehicle for consignment sale. Sideshift, Heating, full cab,

Condition: used, functionality: fully functional, load capacity: 22,000 kg, fork length: 1,200 mm, Forks Load center: 900 Fork width: 260 mm Fork thickness: 90 mm ISO class: Terminal West Condition: Ready for use and fully functional Technical condition: Very good Fjdez Ev Ivjpfx Afuegh Description: Forks for Hyster 260 x 90 x 1200 mm

Condition: used, functionality: fully functional, machine/vehicle number: G005A09824V, Year of construction: 1998, operating hours: 6,398 h, load capacity: 4,000 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: duplex, overall weight: 5,480 kg, color: yellow, Equipment: CE marking, - Hyster - H4.00XL - Year of manufacture: 1998 - Hour meter reading: 6398 - Duplex mast Fgedpfxez N Eqpo Afueh - Diesel engine - New forks - Fully functional

Condition: new, functionality: fully functional, Aerial work platform, work basket with platform for forklift (like new) Width: 870mm Depth: 870mm Guardrail height: 1020mm / 1500mm / Total height of forklift protection mast: 2330mm Includes extension: 480mm with side access With forklift mounting distance: min: 550mm – max: 940mm Fsdpfezyu Tiox Afuegh Forklift tine receiver: width max. 190mm x height 90mm Available in stock.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm Fedoz I Eggjpfx Afusgh the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: used, Year of construction: 1989, operating hours: 10,746 h, lifting height: 4,300 mm, fuel type: gas, mast type: duplex, fork length: 1,200 mm, Year of manufacture: 1989 Empty weight: 5.810 kg Lifting capacity: 4.000 kg Mast type: duplex Fgedpez I A Hdsfx Afush = Additional options and accessories = - Pneumatic shaped solids = More information = Please contact Bas Sindorf , ) for more information

Condition: good (used), functionality: fully functional, machine/vehicle number: K005A02146X, Year of construction: 2000, operating hours: 7,920 h, load capacity: 5,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,200 mm, fork length: 2,400 mm, overall weight: 7,880 kg, total height: 3,200 mm, total length: 6,000 mm, total width: 1,520 mm, Equipment: UVV, sideshift, Hyster H5.00XM LPG Forklift Year of manufacture: 2000 Operating hours: 7,920 h Lift height: 4,600 mm to top of forks Overall height: 3,200 mm Load capacity: 4,410 kg effective with fork positioner and sideshift Overall dimensions approx.: 1,520 mm wide; approx. 3,600 mm long without forks Fork length: 2,400 mm - Fork positioner adjustable from approx. 460 mm to 1,350 mm overall width - Bracket for 2 gas cylinders with changeover valve - Sideshift Fgsdpoyi Eyajfx Afueh - Power steering The machine is in perfect working order and ready for immediate use. Affordable delivery by professional service provider possible. Have a look at our other ads as well. We always have a large selection of high and low lift trucks and forklifts in stock. Do you need spare parts for your forklift, pedestrian stacker, etc.? Just contact us. Didn’t find the right unit? Simply send us an email with your requirements and we will check if we have the right machine for you.

Year of construction: 1986, condition: used, functionality: fully functional, For sale is a complete silo discharge and conveying screw system from a wood processing production facility. The system was in regular operation until production was halted approximately 6 months ago and was subsequently decommissioned. The complete package includes the mechanical silo discharge system, several conveying screws or transport lines, various gear and electric motors, the complete associated electrical control system in the control cabinet, as well as an additional new or unused spare motor. The system was used for discharging and further conveying wood chips or similar bulk material from the silo towards the heating system. Scope of delivery The offered complete package includes, among other things: - complete mechanical silo discharge system - several conveying screws / tubular screws - existing transport and conveying lines - several gear motors and electric motors - Bonfiglioli gearboxes - SEW-EURODRIVE drive technology - NORD gearbox technology - ASEA, ICME and Dietz electric motors - various connection, transition and discharge components - complete control cabinet with control and switching components The complete existing control cabinet is part of the offer. This offer includes not only individual conveying equipment but a comprehensive, cohesive system and spare parts package including the existing control system. Drive technology Various industrial motor and gearbox components from well-known manufacturers are installed. Among others: Bonfiglioli Riduttori Gearbox type MVF 130/2R, 4.00 HP, gear ratio i = 1/35. ASEA Fgjdpfoz Iuikex Afush Three-phase motor, 0.55 kW, 930 min⁻¹, 380–420 V, protection class IP54. SEW-EURODRIVE Industrial gear motor, 0.55 kW, approx. 1,400/33 min⁻¹. NORD Industrial gearbox, type SK 30F-EC80, gear ratio i = 157.20. ICME Ravenna Three-phase motor, 0.55 kW, approx. 920 min⁻¹, protection class IP55. Dietz-motoren Three-phase motor, 0.4 kW, 2,760 min⁻¹, 220/380 V. Further technical specifications and photos of the existing nameplates can be provided upon request. Condition The used components are in a condition appropriate for their age and use. Signs of wear, dust deposits and some superficial corrosion are present. The system is suitable both for possible further use or adaptation to an existing silo system and as a comprehensive spare parts and components package for silo, heating and conveying technology. In particular, the various gear motors, gearboxes, screw components, the complete electrical control system and the additional new spare motor make the complete package interesting for operators of existing older systems. Inspection / Dismantling The system is still located at the previous production site and can be inspected by appointment. Location: 3608 Thun, Switzerland Availability: immediately Dismantling can begin immediately - must be completed by July 31, 2027. Dismantling, removal, loading and transport will be carried out entirely by the buyer at his expense and responsibility. Sale of the complete system in its existing condition, as inspected. Subject to prior sale. Sale with exclusion of guarantee and warranty. Selling price: 4,500.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: good (used), Year of construction: 2005, operating hours: 8,167 h, lifting height: 4,210 mm, fuel type: electric, mast type: duplex, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Year of manufacture: 2005 Empty weight: 5.400 kg Lifting capacity: 3.000 kg Number of valves: 3 CE mark: yes Technical condition: good Visual appearance: good Mast type: duplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - Pneumatic shaped solids - Roof window = More information = Fgedpfxsz I Ak Nj Afuoh Number of valves: 3 Forklift weight class: 1928 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Fgjdpfez Iqp Tjx Afush Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS Fgedpfoz Ir Hajx Afujh - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, Year of construction: 1994, operating hours: 5,979 h, lifting height: 3,450 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, Year of manufacture: 1994 Empty weight: 6.385 kg Lifting capacity: 4.000 kg Mast type: duplex = Additional options and accessories = - Closed cabin - Heater - Particulate filter Fgjdpfoz I A D Aex Afujh = Remarks = = Additional options and accessories = - Cushion tyres - Free lift - Particulate filter - Roof window = More information = Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 1998, operating hours: 8,240 h, lifting height: 5,550 mm, fuel type: electric, mast type: triplex, battery voltage: 48 V, fork length: 1,200 mm, Year of manufacture: 1998 Empty weight: 3.600 kg Lifting capacity: 1.800 kg Number of valves: 3 General condition: average Technical condition: average Visual appearance: average Mast type: triplex = Additional options and accessories = - 3rd valve = Remarks = = Additional options and accessories = - Free lift Fodpfxsz I A Rpe Afuegh = More information = Number of valves: 3 EPA Marked: yes Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: good (used), Year of construction: 2004, operating hours: 4,931 h, lifting height: 3,030 mm, fuel type: electric, mast type: duplex, battery manufacturer: Celectric, battery capacity: 625 Ah, battery voltage: 48 V, Year of manufacture: 2004 Empty weight: 3.120 kg Lifting capacity: 1.600 kg Number of valves: 3 Technical condition: good Visual appearance: good Mast type: duplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = Number of valves: 3 EPA Marked: yes Fork carriage: Sideshifter Fedpfx Afoz I Ahujuogh Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2011, operating hours: 1,163 h, lifting height: 3,300 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H2.5FT diesel forklift, year of manufacture: 2011, hours: only 1,163!, previous owner: German Armed Forces, rated load capacity: 2,500 kg, lift height: 3,300 mm, duplex mast, fork length: 1,800 mm, diesel engine [36 kW/48 hp], weight: 4,180 kg, ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. For more information, please visit our website. Subject to errors and prior sale! Cabin = Further information = Lifting capacity: 2,500 kg Fgodpfxsz Nuyys Afueh Overall height: 220 cm Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2011, operating hours: 1,218 h, lifting height: 3,300 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Hyster H2.5FT diesel forklift, year of manufacture: 2011, hours: only 1,218!, previous owner: German Armed Forces, rated load capacity: 2,500 kg, lift height: 3,300 mm, duplex mast, fork length: 1,200 mm, fork extension: 1,800 mm, diesel engine [36 kW/48 hp], weight: 4,180 kg, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Cabin Fgedpsz Nux Aofx Afujh = Further information = Lifting capacity: 2,500 kg Overall height: 220 cm Please contact Tobias Ebert for further information.

Condition: good (used), functionality: fully functional, machine/vehicle number: A177B27927J, Year of construction: 1990, operating hours: 6,927 h, load capacity: 3,000 kg, lifting height: 4,150 mm, fuel type: diesel, mast type: duplex, front tire type: pneumatic tires (air-filled), rear tire type: pneumatic tires (air-filled), overall weight: 4,470 kg, Equipment: lighting, pallet forks, - Hyster - H3.00 XL - Year of manufacture: 1990 Fgedpfx Aozc Iuaefueh - Diesel - Isuzu engine - In good condition

Condition: good (used), Year of construction: 2008, operating hours: 5,183 h, lifting height: 4,700 mm, fuel type: diesel, mast type: duplex, Year of manufacture: 2008 Lifting capacity: 5.000 kg Number of valves: 3 Fgsdpfxsz I Auno Afueh CE mark: yes Technical condition: good Visual appearance: good Mast type: duplex = Additional options and accessories = - 3rd valve = Remarks = = Additional options and accessories = - 4th valve = More information = Make of engine: Cummins Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information