Used Igus I6Fx8002-5Dn05 for sale (29)

Condition: used, “functionally tested; item comes from the dismantling of equipment from an automotive supplier” Quantity: 2 available Manufacturer: Igus Type: i6FX8002-5DN05 Laodpfx Ahezlt Txoaeh Description: Igus Chainflex servo cable, suitable for Siemens servo drive systems. Highly flexible cable for energy chains, designed for continuous motion applications.

Condition: used, Functionally tested; item originates from the dismantling of equipment from an automotive supplier. Manufacturer: Igus Type: i6FX8002-5DQ38 Description: Chainflex signal cable from Igus, suitable for Siemens controllers. Specifically designed for moving applications and energy chains, offering a long service life. Lodpfx Ajzmm Niohaoah

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, overall weight: 8 kg, load capacity: 1 kg, arm reach: 790 mm, controller manufacturer: igus, controller model: iRC, input voltage: 24 V, repeat accuracy: 1 mm, igus robolink® DP 5 DOF articulated arm robot (RL-DP-5) A functional video can be sent upon request. Manufacturer: igus Model: robolink® DP 5 DOF articulated arm (RL-DP-5) Category: Industrial robot / Articulated arm robot Condition: Used machine / Like new (exhibition piece / test operation) Year of manufacture: 2020 Operating hours: approx. 50 hours Location: 6133 Weerberg / Tyrol Availability: Immediate PRICING: ----- Price type: Negotiable Price (net): 3,450,- EUR (plus 20% VAT, if a B2B invoice is desired) Invoice details: VAT can be shown (B2B invoice possible) For sale is a like-new, immediately ready-for-use 5-axis industrial robot (articulated arm) from the renowned igus® brand, part of the proven robolink® DP series (item number: RL-DP-5). The system was used exclusively for a short laboratory or test project and has only approximately 50 operating hours. The robot is in flawless, absolutely like-new condition, both technically and visually. Thanks to the integrated absolute value encoders on the stepper motors, the arm does not lose its current position even after a power failure, emergency stop, or restart. Complex reference runs are therefore not necessary during ongoing operation. SCOPE OF DELIVERY & SYSTEM PACKAGE: • Articulated arm: igus robolink® DP 5 DOF with backlash-free drylin® gears, stepper motors, and encoders. • Control electronics: Modular DIN rail version (complete control computer for mounting in a control cabinet). • Software: Original royalty-free igus iRC (igus Robot Control) programming software (free download for intuitive, easy programming on a PC). • Free test accessories: A fully functional, self-built vacuum gripper is included in the package as a free addition for immediate testing and training. TECHNICAL PARAMETERS: • Degrees of freedom / axes: 5 DOF • Payload: 0.5 kg (nominal) to max. 1.0 kg (depending on the working area) Laodpszl N Tuefx Ahaoh • Reach: approx. 790 mm • Swivel range (axis 1): 360° • Control: igus Robot Control (iRC) – DIN rail control computer • Voltage supply: 24 V DC (approx. 12 A) • Interfaces: 7 digital inputs and outputs (I/Os) for peripherals & gripper • Weight (articulated arm): extremely light 7.94 kg • Repeatability: +/- 1.0 mm CONDITION / INSPECTION: The device is currently ready for operation and can be demonstrated and tested on site if desired. HANDLING & SHIPPING: • Collection preferred (postal code: [Your postal code]) • Insured shipping via a freight forwarder or parcel service in a robust transport box is possible after consultation and upon assumption of costs. • A proper B2B invoice with VAT can be issued upon request. If you are interested or have questions about technical integration, please contact us directly via the message function. ----- Legal notes for used machines: The sale is preferably made to commercial enterprises (B2B) with the exclusion of any warranty, guarantee, and liability for defects. Subject to prior sale.

Condition: used, Year of construction: 2011, operating hours: 11,591 h, functionality: fully functional, machine/vehicle number: B610, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, number of injections: 897,476, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2011. Laedpfx Aheytgmveajh The machine was operated exclusively by a professional injection molder, regularly serviced, and is in excellent condition. Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Equipment & Highlights ✔ Selector valve – ensures clean part ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – provides precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Air blow system – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Since you are buying directly from the machine owner, you save on dealer commission costs. We have other machines of this type in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Technical data – Cronoplast 6/10P Screw / Injection unit Technical data - Cronoplast 6/10P Plasticizing unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping unit - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejection force 5 kN - Ejection stroke 45 mm Dimensions: - Weight including frame approx. 350 kg - L x W x H: 116 cm x 80 cm x 198 cm The sale is made excluding any warranty and liability for defects.

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide for tool dispensing systems -Manufacturer: igus, linear drive type DryLin T from Achterberg Toolbase AK -Actuator: DLG 060-068.03 -Threaded rod: Ø 12 x 980 mm -Number: 8x linear drive available -Price: per piece Lodeu Sv Tvepfx Ahasah -Dimensions: 1615/110/H120 mm -Weight: 5.5 kg/piece

Condition: used, energy chain, cable drag chain, energy guiding chain, cable chain, drag chain Laedpfsuxg Rrox Ahaoh -Manufacturer: IGUS, energy chain cable drag chain -Length: 5530 mm -Width: 240 mm -Accessories: incl. U-clamps type CFX 12.1 / CFX 12.2 see photos -Transport dimensions: 1060/840/H245 mm -Weight: 26 kg

Condition: used, energy chain, cable drag chain, energy guiding chain, cable chain, drag chain -Manufacturer: IGUS, energy chain cable drag chain 2 pieces -Length: 4250 mm -Width: 240 mm -Bending radius: 160 mm Laodpfxsuxg Rle Ahaeh -Accessories: incl. clamps see photos -Transport dimensions: 920/890/H480 mm -Weight: 43 kg

Condition: used, functionality: fully functional, color: green, The calender consists of the following units: - A set of 4 rollers - A set of roller drives - Frames - A running gear - A control cabinet The set of rollers consists of 4 rollers of different diameters. The rollers are mounted on a common frame, which allows you to change their mutual position (change the gap between the rollers). The gap between rollers 1 and 2 is adjusted using adjustment screws driven by MRA-63 type worm gears. The gap between rollers 2 and 3 is adjusted manually by turning the adjustment screws. Each roller has an individual drive, allowing you to change the rotational speed. The rotational speed of the rollers and the thickness of the plate are set on the operating panel of the Calender control cabinet. A pressure roller and disc knives for cutting the outer edges of the plate are installed above the last roller (No. 4). The knife spacing is adjustable, which allows the production of boards of various widths. Roller diameter: Roller 1 – 515.00 mm Roller 2 – 315.00 mm Roller 3 – 315.00 mm Roller 4 – 355.00 mm Roller 5 – 95.00 mm Disc knife 6 – 200.00 mm - Roller width 230 cm - Roller working width 210 cm - Total width 300 cm - Height 250 cm - Extruder departure / arrival (calender-extruder) 70 cm - Length with arrival 350 cm Laodpfx Ahewcxufeaoh Power supply - 3 x 400 V (32A) - Motors 4 x 0.75 kW - Fans 2 x 0.25 kW - Pumps 2 x 1.1 kW - Access motors 2x 0.25 kW - Central pump 1 x 0.5 kW - Roller pressure motors 2 x 0.25 kW - Razor blade motors 2 x 0.15 kW

Condition: used, Year of construction: 2003, Format: 390 x 285 mm Equipment: Book stacker Book Format Dimensions (Height x Width) Minimum format: 115 x 100 mm (down to 115 x 70 mm with optional small-format modifications) Maximum format: 390 x 285 mm (up to 390 x 310 mm with specific produ Book Thickness Minimum thickness: 5 mm Maximum thickness: 90 mm Lajdpszphl Rjfx Ahajh Stacking and Pile Height Maximum stack / pile height: 340 mm Operational Performance Mechanical capacity: Up to 3,900 cycles per hour (or roughly 65 cycles per minute) Infeed and Rotation: Features a built-in turning device capable of rotating the blocks gently

Condition: good (used), - Fixed speed - 380 Volt - Height-adjustable legs (working height 70 - 100 cm) More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team Lsdpfx Ahsz Rgq Hsajah - We can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, mileage: 488,000 km, power: 353 kW (479.95 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, Equipment: air conditioning, = Additional Options and Accessories = - Cabin - Rotating beacon = Notes = Used tipper truck in combination design (tipper/semi-trailer tractor) – external planetary axles – Rockinger trailer coupling – air conditioning – refrigeration unit – rotating warning lights – light bar – permissible total weight 26,000 kg – unladen weight (as a tipper) 12,740 kg – unladen weight (as a semi-trailer tractor) 10,280 kg – wheelbase 3,625 mm = Further Information = Year of manufacture: 2007 Front axle: Steered; Suspension: Leaf spring suspension Rear axle 1: Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Reduction: External planetary axles; Suspension: Air suspension Unladen weight: 12,740 kg Payload: 13,260 kg GVW: 26,000 kg Reference number: 8 = Company Information = Lajdpfxs Adrh Ne Ahash We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, mileage: 241,262 km, power: 70 kW (95.17 HP), first registration: 10/2014, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, total length: 7,200 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 4,360 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, Bluetooth, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric = Notes = Configuration: 4x2, Payload: 1272 kg, Curb weight: 2228 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Type of cab: Single cab, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Color: White, Type of lighting: Halogen lamp, Bluetooth, Engine power: 70 kW (94 Hp), Number of cylinders: 4, Engine displacement: 2143 cc, Fuel: Diesel, Euro: 5, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, L3H2 Maxi Post NL Interior Automatic Euro5 95 kW!, Tire type: Summer tires = Additional Information = General Information Number of doors: 1 License plate: VK-070-B Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 1 mm; Tire tread depth right: 4 mm Weights Unladen weight: 2,228 kg Payload: 1,272 kg GVWR: 3,500 kg Functional Loading area height: 59 cm Condition Lodpfxez H Na Uo Ahasah Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 1

Year of construction: 2022, condition: good (used), functionality: fully functional, machine/vehicle number: P0000581, Bonding device from Alba Industries GmbH, used as a parts dispenser 24VDC / pneumatic. Includes extensive components from Festo, Norelem, Item, Gutekunst, Beham, Igus, ACE, Storz, Elesa & Ganter, Steyr-Werner, etc. Bill of materials of the installed elements see attached PDF. Laodpfx Ajyybitehaeh EPlan and pneumatic diagrams are available and can be viewed upon request and on-site appointment.

Condition: new, functionality: fully functional, mileage: 10 km, power: 74 kW (100.61 HP), fuel type: diesel, color: white, gearing type: mechanical, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, sliding door, soot filter, traction control, truck registration, Peugeot Partner Doka Flexcab! Flexible seating configuration: 2-seater, 4-seater, 5-seater—more or less loading area! Truck registration! Lodpfoyir Nhsx Ahasah Mirror monitor, rear camera, automatic climate control, automatic handbrake, etc. We are happy to offer you financing or leasing options. - Immediately available!- German new vehicle from an official Peugeot dealer!

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 Lsdpexlppijfx Ahaoah -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Condition: good (used), Year of construction: 2022, operating hours: 8,212 h, functionality: fully functional, machine/vehicle number: 294A01A2200295, overall weight: 7 kg, type of input current: DC, input voltage: 24 V, We are offering a fully functional conveyor unit by Motan, model METRO SG HOS 05, year of manufacture 2022. Ledpjy Nnc Eefx Ahajah Asking price: €499 (negotiable) We have both sizes available: HOS 05 (5 l) and HOS 10 (10 l). The clamping bracket for mounting to the hopper rail, shown in the picture, is not included in the price. Sale is made without warranty and returns are excluded.

Condition: used, Year of construction: 2000, TGW Roller Conveyor 2400-475-420 Lasdpfx Asxv Hayohash RA2436 Make: TGW Year of manufacture: 2000 Roller width (RB): 420 mm Nominal/outer width (NB): 475 mm Module length: 2400 mm Diameter rollers: 50 mm Distance between rollers: 75 mm frame height: 115 mm 40 modules available. Optional: Drive station with deflection supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, We offer roll-off containers / landscaping containers with a drive-over and spring-loaded rear door, a hydraulic drop gate, and a hydraulic French door, all in a spar-free design, available upon request. Delivery throughout Europe! Suitable for transporting heavy bulk goods and construction machinery. The only landscaping container with a clear / usable floor width of 235cm! ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We use exclusively "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard version in HARDOX HB450 Dimensions: 4.5 - 7.0m x 2.35 x 0.8m 4.5 - 7.0m x 2.35 x 0.95m 4.5 - 7.0m x 2.35 x 1.05m 4.5 - 7.0m x 2.35 x 1.15m 4.5 - 7.0m x 2.35 x 1.25m 4.5 - 7.0m x 2.35 x 1.35m 4.5 - 7.0m x 2.35 x 1.40m Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Lifting bracket Ø 50 mm Ljdpfx Ajzhpklshasah Hook height 1,570 mm DIN 30722-1 up to 15,000 kg GVW Material thicknesses "HARDOX HB450" Floor: 5mm Walls: 3, 4 or 5mm Cross member: INP 180 Or DIN 30722-2 up to 22,000 kg GVW -Rear door drive-over with spring relief -End wall raised / cab protection or alternatively flat -Closing profile made of square tubing -All-around tarpaulin and net hooks -Primed once on the inside, double coated on the outside -Double coated on the outside in a single color, RAL color of your choice Optionally available: -Standard wing doors -hydraulic rear door with wing doors -Drop gate, hydraulic or pneumatic mounted with piano hinge -Removable hinged flap "in the upper area" -Tie-down eyes in the floor -Roll tarp -Marcolin covering, manual or electric -Netting system for covering / load securing -Grain slide

Condition: used, mileage: 372,551 km, power: 70 kW (95.17 HP), first registration: 06/2014, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,320 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, total length: 7,100 mm, total width: 1,990 mm, total height: 2,730 mm, loading space length: 4,120 mm, loading space width: 1,770 mm, loading space height: 1,940 mm, Equipment: ABS, Bluetooth, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric = Notes = Configuration: 4x2, Payload: 1272 kg, Tare weight: 2228 kg, Gross vehicle weight: 3500 kg, Unbraked towing capacity: 750 kg, Braked towing capacity, center axle: 2000 kg, Cab type: Single cab, Number of airbags: 1, Parking assist: None, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 70 kW (94 hp), Number of cylinders: 4, Displacement: 2143 cc, Fuel: Diesel, Euro: 5, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, L3H2 Maxi Post NL Interior, Automatic, Euro 5, 95 hp!, Spare wheel, Spare wheel tread depth: 4%, Tire type: Summer tires = Additional Information = General Information Number of doors: 1 License plate: VJ-862-P Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 1 mm; Tire tread depth right: 2 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 2,228 kg Payload: 1,272 kg GVWR: 3,500 kg Functional Loading area height: 68 cm Condition Overall condition: average Technical condition: average Ledpfx Asz Av H Nohajah Optical condition: average Damage: none Number of keys: 2

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1,200 units per shift! TECHNICAL DETAILS Production capacity: 150 pcs/h Lajdpfxszxgmrj Ahash MACHINE DETAILS Electrical data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra / Thin frame machine i-3 – CE version Warm-edge spacer production system Production of Intercept ULTRA stainless steel, ThinPlate or BlackLine

Condition: used, Year of construction: 2018, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Lsdpfshx R Dvjx Ahasah Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 Construction: steel + aluminum Working area: 4000/2000/200 XY axis drive: double-sided gantry drive: 4Nm stepper motors with gearboxes, rack and pinion Z axis drive: stepper motor, ball screw Travel speed: up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files via external pen-drive Sheet detection system THC height control system TBI linear guides Double-sided gantry drive: X axis: stepper motor and rack and pinion Y axis: stepper motor and rack and pinion Z axis: stepper motor and ball screw Drives implemented using TBI HGR 20 rails Table equipped with a water table (water table, providing cleaner cutting, material cooling, and reduced gas emissions during processing) INCLUDED: - water table - replaceable grating - control program in Polish Lasdpfx Ahsiphrlsaeh - CE declaration of conformity - technical documentation - warranty - commissioning and training included in the price The latest control system available in our cutters: Integrated THC height regulator Anti-torch dive function Accepted file types: DXF, PLT (hpgl), G-Codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Cutting parameter database Project angle correction to material Ability to cut from any location Ability to cut from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to the material layout angle Soft and Hardware limits THC anti-dive functions Game Pad control possible Material detection via touch system, floating head WHY IT'S WORTH IT WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) PROFESSIONAL GUIDES FROM THE RENOWNED HIWIN COMPANY; THESE GUIDES ARE CHARACTERIZED BY VERY LONG LIFESPAN, HIGH CUTTING QUALITY, AND DO NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, FASTENERS, HOLDERS, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH ENSURES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH-QUALITY SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUSCEPTIBLE TO DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET CUSTOMER REQUIREMENTS WE HELP IN ARRANGING LEASING Possibility to select the appropriate cutter to meet the individual needs of the company. We offer other table sizes.

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 - VENTILATED Laodpfx Ajiphu Iehaeh Construction: Steel + Aluminum Working area: 4000/2000/200 XY axis drive: Double-sided gantry drive: 4Nm stepper motors with gearboxes, toothed racks Z axis drive: Stepper motor, ball screw Travel speed: Up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files using external pen drives Sheet metal detection system THC cutting height control system TBI linear guides Double-sided gantry drive: X axis: Stepper motor and toothed racks Y axis: Stepper motor and toothed racks Z axis: Stepper motor and ball screw Drives implemented using TBI HGR 20 rails Ventilated table adapted for fume extraction INCLUDED: - Ventilated table - Control software in Polish - CE declaration of conformity - Technical documentation - Warranty - Commissioning and training included The latest control system available in our cutters: Integrated THC height regulator Anti-torch plunge function Supported file types: DXF, PLT (hpgl), G-codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Database of cutting parameters Project angle correction for the material Possibility of cutting from any location Possibility of cutting from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with external CAM software Separate speed for holes Parameter database Project correction to the material layout angle Software and hardware limits Anti-plunge THC functions Game Pad control possible Material detection via touch system, floating torch head WHY IS IT WORTH IT? WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) HIGH-QUALITY GUIDES FROM THE RENOWNED HIWIN COMPANY, CHARACTERIZED BY VERY LONG LIFE AND HIGH CUTTING QUALITY, WHICH DOES NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, MOUNTINGS, HOLDERS, ETC. ARE MANUFACTURED BY US USING CNC TECHNOLOGY, WHICH GUARANTEES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS: HIGH-CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT AFFECTED BY DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN THE CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET THE CUSTOMER'S REQUIREMENTS WE HELP WITH ARRANGING LEASING Possibility of selecting the appropriate cutter to meet the individual needs of the company. We offer other table dimensions.

Year of construction: 2023, condition: new, PLASM PLOTER MODEL MTX 1530 Ventilated Construction: steel+aluminum Working field: 3000/1500/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: Hiwin IGUS guide Automatic material detection system Power supply: 240V Permissible load: 1800kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system Hiwin wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with Hiwin brand rails Ventilated table adapted for fume extraction INCLUDED: -ventilated table -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end DXF,PLT import Automatic generation of paths with offsets, entries and exits Laodpfxjnfvlge Ahash The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Year of construction: 2023, condition: new, PLASMA PLOTTER MODEL MTX 2030 Construction: steel+aluminum Working field: 3000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: HIWIN IGUS guideway Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system Hiwin wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with Hiwin brand rails Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining) INCLUDED: -water table -interchangeable grate -control software in Polish -Declaration of Conformity CE - DTR - warranty. Lajdpfx Ahsnfu Tleajh -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end DXF,PLT import Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.