Used Iijima (Japan) Efc-1600 for sale (2,806)

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Lsdpfjv Nzpgox Andsaf Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW Lajdpfx Anex Ndu Dodof • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: excellent (used), Year of construction: 2008, JSW J350AD Injection Molding Machine Electric injection molding machine Year of manufacture: 2009 Type: Electric injection molding machine Laodpfx Ajzvwwvjndof Total installed power: 30 kW Clamping unit • Clamping force: 3440 kN • Distance between columns (H × V): 730 × 730 mm • Minimum mold height: 300 mm • Maximum mold height: 670 mm • Maximum mold opening stroke: 700 mm • Maximum ejector stroke: 152 mm • Maximum ejector pin height: 365 mm • Diameter of centering ring: Ø 160 mm • Dimensions of mold mounting plates (H × V): 1085 × 1085 mm Injection unit • Screw diameter: Ø 66 mm • Maximum injection shot weight for PS: 890 g • Maximum injection shot weight for PP: 767 g • Maximum injection speed: 160 mm/s • Maximum injection pressure: 1770 bar • Nozzle orifice diameter: 6 mm

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Lodpfx Aszq Tzasndjaf Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser hours: 27,000 h, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Ledpfxjzr Ha Es Andeaf

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Lodpfx Ansv Nv Taedoaf Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Lodpfszqhgdjx Andeaf ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on time: 12,577 hours Laser on time: 68,745 hours including Sheetmaster Lasdjznir Aopfx Andof

Condition: used, Year of construction: 2001, functionality: fully functional, 1600 kVA Oil/Hermetic Transformer, Pauwels, year of manufacture 2001, 21kV/0.69, vector group Dyn5, HV plug-in bushings, LV porcelain bushings, Optional: pointer thermometer, full hermetic protection, rollers, connection flags. Laodsxwa S Eepfx Andof

Condition: good (used), We are offering a used workbench frame for sale. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 1,000 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 02x workbench crossbars, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbenches are shipped unassembled; - The workbench stands are pre-assembled; Ljdpjhvmmzjfx Andeaf - The production time is typically approx. 3 - 5 working days.

Condition: good (used), We offer you a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x Workbench stands, used Material color: sendzimir galvanized Ledpfehvmmtox Andoaf Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x Workbench crossbars, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x Locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbenches are supplied disassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We are offering a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: Lajdpfx Ajhvmnbendef 02x workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 02x workbench crossbeams, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbenches are delivered unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We are offering a used workbench frame for sale. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 800 mm Laodshvmmpopfx Andjf Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x Workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x Workbench traverses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x Locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbenches are delivered unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We are offering a used workbench frame for sale. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of supply: 02x workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 02x workbench crossbeams, used Lajdpfehvmm Nex Andjf Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x locking pins, used Design: fully galvanized The images are for illustrative purposes. The material color may vary. - The workbenches are delivered unassembled; - The workbench stands are pre-assembled; - The production time is usually approximately 3 - 5 working days.

Condition: good (used), We offer you a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Lajdpfjhvmmdjx Andsf Depth: approx. 1,000 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 1,000 mm Includes cross and diagonal braces, footplates The stands are pre-assembled (bolted frame) 04x workbench crossbars, used Material color: grey Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbenches are supplied unassembled; - The workbench stands are pre-assembled; - The production time is typically around 3-5 working days.

Year of construction: 2022, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: OWD/492/2022, Equipment: CE marking, For sale is a used Metal Technika OWD-1600 4m optimizer with very low operating hours, approximately 2500 hours. The machine is connected and ready for trials and tests. Net price. TECHNICAL SPECIFICATIONS Performance From 3,200 to 8,250 m/8 hours. Electronics: Controller with a color touchscreen display "MITSHUBISHI". Functions - Full optimization of 30 dimensions in two quality classes, - Creation of cutting programs for different customers, - Cutting at the marked location using a fluorescent pencil, - Trimming the margin (beginning and end of the input material) - Cutting in batches (several pieces at once) - Meters counters: total, change, operator, monthly, - Cutting accuracy ±0.3 mm. Engine: 7.5 KW (saw Ø500 – 140 teeth) Width of input material 12 - 250 mm max. width/height (250 / 50 mm) Height of input material 12 - 120 mm max. height/width (120 / 120 mm) Length of input material up to 4,200 mm. Lubrication: Oil-based central lubrication system. Lasdozdf Tpjpfx Andof Output automation Connection for a conveyor belt and a sorting table.

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min Lsdpfotvau Hox Andsaf FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, saw drive: 380 W, PRIMULTINII SIF 1600 band saw, in very good working condition. Laodpfx Aoyha A Tendsf

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world Lajdpsm E I D Hefx Andjf loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2007, KIWA JAPAN KH-45 Horizontal center 4 axes Fanuc 31i control Year 2007 Ledpfx Anjvnzgijdoaf XYZ -640 x 610 x 680 B-360 degrees Table 400 x400 Magazine 60 tools Taper BT40 Spindle 12000 rpm Spindle motor 22.4 kw Machine dimensions 4540 × 2400 x 2584 length width height Weight 9200 kg

Condition: ready for operation (used), Maximum material height: 80 mm Table dimensions: 2000 x 1000 mm Lajdpfjwma Hkjx Andjf Arm clearance: 1600 mm Motor power: 0.75 kW

Condition: excellent (used), YUKI INDUSTRIAL SEWING MACHINE with 4 needles Overlock machine with table and air support during operation IN TOP CONDITION Lasdjd Swvuopfx Andjf

Condition: used, Year of construction: 1997, CNC lathe Dainichi F200 Japan year 1997 Fanuc 18iT turning diameter: 360 mm turning length: 600 mm Laodpfoymcvgjx Andof spindle bore: 52 mm chuck: 200 mm turret for 12 tools tailstock probe chip conveyor

Condition: excellent (used), 1600 MM 6000 MM chuck 1400 MM Swing over cross slide: 1,350 mm Lajdpfxezvaiho Andsf Spindle bore: Ø153 mm

Condition: like new (used), Manufacturer: Schenck Size: 1.600 x 1.200mm Unbalance Motor: 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. – 3,7 / 2,15A) Laedpfx Aog Snvmondjf With Rubber Protection. Springs included