Used Illuminata Miseq Sy-410-1003 for sale (3,419)

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Dwedpfxszikcro Akmec Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 8100404, Our showroom demonstration model is for sale. It comes without electrode holder and ground clamp. New cables are available upon request for an additional charge. Welding Power Easy-Stick 410 SET Adjustment range: 30 – 400 A Duty cycle at maximum current at 40°C: 60% Duty cycle at 100% duty cycle at 40°C: 310 A Fuse protection: 32 A Line voltage: 3 x 400 V Dwsdpfx Ajv T Tx Iekmjc Line voltage tolerance: -10 – +15% Line frequency: 50/60 Hz Open circuit voltage: 66 V Power consumption: 13 kVA Standard: EN 60974-10 Protection class: IP 21 Insulation class: H Marking: CE, S Operating temperature: -10 – +40 °C Weight: 24 kg Length x width x height: 618 x 330 x 441 mm

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like New Morgan Rushworth Baykal 320ton x 4metre Cnc Pressbrake For sale Djdovgc Rtopfx Akmowc Make: Morgan Rushworth Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ys2g6x20002102499, mileage: 578,715 km, power: 301.55 kW (409.99 HP), first registration: 09/2014, fuel type: diesel, empty load weight: 8,400 kg, overall weight: 26,100 kg, axle configuration: > 3 axles, next inspection (TÜV): 08/2027, fuel: diesel, color: light blue, number of seats: 2, Year of construction: 2014, operating hours: 578,715 h, Equipment: ABS, Bluetooth, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, fog lights, full service history, hill-start assist, power mirror, seat heater, tachograph, truck registration, The car has recently passed its inspection and is equipped with hydraulic power steering and an automatic transmission, and it has good tires. Dwedpfxezk D Ecj Akmsc

Condition: used, Year of construction: 2006, operating hours: 37,695 h, functionality: fully functional, Equipment: documentation/manual, CNC lathe – Gildemeister CTX 410 with C-axis (used) Machine data Model: Gildemeister CTX 410 Year of manufacture: 2006 Control system: Siemens 840D (ShopTurn) Spindle hours: approx. 37,695 h Dsdpfx Asz Nxcxjkmowc Max. spindle speed: 5,000 rpm Max. turning length: 635 mm Spindle bore: 65 mm Tool turret: 12-station Tool holder: VDI30 Condition: used, functional Accessories Chip conveyor with coolant pump Bar loader included, but never connected IFM oil mist extraction system Röhm 3-jaw chuck Maintenance / Service The machine was recently realigned by a DMG technician (turret and spindle). The following components were replaced: Door switch Foot pedal for chuck Various relays New NPU New PLC Location 24222 Schwentinetal Transport / Collection Collection only Transport and loading are to be arranged by the buyer Terms of sale Sale exclusively to businesses / entrepreneurs No sale to consumers Sale is made with exclusion of any warranty for defects No guarantee or warranty of suitability Inspection and functional testing possible by appointment Price net. VAT can be shown separately.

Condition: excellent (used), mileage: 462,901 km, power: 302 kW (410.61 HP), first registration: 10/2017, fuel type: diesel, tire condition: 50 %, axle configuration: 8x2, wheelbase: 6,100 mm, fuel: diesel, color: white, driver cabin: day cab, emission class: euro6, number of seats: 2, total length: 8,550 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2017, = Additional options and accessories = - Power take-off (PTO) - Sun visor = More information = General information Cab: single Registration number: 66-BJT-5 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Lift axle; Max. axle load: 8000 kg; Steering Rear axle 2: Max. axle load: 11500 kg Rear axle 3: Lift axle; Max. axle load: 7500 kg; Steering Weights Empty weight: 12.675 kg Carrying capacity: 23.425 kg GVW: 36.000 kg Max. towing weight: 50.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = We do not charge delivery costs. Dwjdpjzucx Asfx Akmoc All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: good (used), Ifsys Type: 114100, Type: VL 13 Screw feeding system Hopper system with 2x Vibroliner and 2x Vibrohopper 1x Return conveyor 2x Control unit FC 1000 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) Dsdpjzdp Icefx Akmswc We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 Dwodpfx Aoz Ernlekmec If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2024, operating hours: 300 h, Kaeser EBS 410 CL SFC screw blower with a 37 kW motor. Dodsz I R Iijpfx Akmjwc Energy-efficient. 41 m3/min, 600 mbar.

Condition: excellent (used), CATALOG NUMBER 7479 Technical specifications: - Shaft width 410mm - 4-knife shaft (TERSA) - Noise reduction comb - Shaft guard - Table length 2610mm - Longer infeed table 1435mm - Cast iron tables - Both tables adjustable Dsdpfezx Sznex Akmowc - Original, adjustable cast iron guide, angle adjustable - Brake - Diameter of dust extraction outlet 115mm - Motor 4kW - Dimensions (L/W/H) 2610x960x1110mm - Weight 578kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – Noise reduction comb – longer infeed table – unpainted – Used planer, very good condition, original DTR documentation Net price: 21900 PLN Net price: 5093 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 41009083, Specifications Type: Automatic band saw for metals Cutting capacity: 410 × 410 mm Cutting at 90°: Ø 410 mm Cutting at 45°: Ø 410 mm Djdpsz Nczwefx Akmewc Main motor: 8.5 to 8.7 kW Blade speed: 10 to 200 m/min (variable) Blade dimensions: 5940 × 41 × 1.1 mm Power supply: 400 V – 50 Hz (or 460 V – 60 Hz depending on the version) Machine dimensions: 2800 × 2100 × 2150 mm Weight: Approximately 4,000 kg Main features • Automatic hydraulic feed. • Automatic feed rate adjustment according to the material. • Variable blade speed. • SIEMENS control panel with display. • Hydraulic vise. • Chip conveyor. • Part counter. • Bar loader.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * 5-axis machine. * Sub-spindle. * Y-axis. * C-axis. * 1.5-meter LNS bar loader. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. * Automatic workpiece collector. * Dual foot pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor with integrated particle filters. * Extensive selection of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming guide, and operating manual. * Weight: 6,200 kg. * Machine currently in operation. Dwodpfx Aoz Nc Svskmjc * Immediate delivery, unless sold immediately.

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg Dsdpfx Akezwvv Tsmjwc If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, mileage: 238,300 km, power: 368 kW (500.34 HP), first registration: 02/2012, overall weight: 40,000 kg, fuel type: diesel, color: orange, axle configuration: > 3 axles, gearing type: automatic, emission class: euro5, total length: 9,400 mm, total width: 2,500 mm, Equipment: ABS, air conditioning, * Iveco Trakker AD 410 T 50 P mit Wechselsystem * Radstand ca . 4,80 m * Euro 5 * Automatik Getriebe * Federung: Blatt/Blatt/Luft/Luft * Sonnenblende * Rundumlicht * Anbauplatte vorne + hydr. SW * Zusatzbeleuchtung * AHK + DL- Anschlüsse + Duomatik * beheizte Frontscheibe * Anbauplatte für Seitenpflug + hydr. SW * Ad- Blue * Schlegel Winterdienstausstattung * Bedienpult für vorne und seitlich * Auspuff hochgezogen Djdpfx Aezu Dtnekmowc * Differnzialsperren * Rückfahrcamera * el. FH * Mutifunktionslenkrad * Küpper Weisser Combi Wet Salzstreuer * IMSSF E23060 HFU * Bj. 2012 * Bedienpult * Reifen 385/65R22,5 ca. 40% * 385/65R22,5 ca. 40% * 315/80R22,5 ca. 70% * 315/70R22,5 ca. 70% * gegen Aufpreis mit Meiller Kippaufbau + Abstützung + Wechselsystem * ca. 5,6m L x 0,5m H x 2,43m B * deutsches Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: good (used), Year of construction: 2013, functionality: fully functional, Technical data, prices, and images can be found in the PDF files attached. Dwjdpfxjzuddyj Akmjc

Condition: used, mileage: 388,200 km, power: 302 kW (410.61 HP), first registration: 03/2012, fuel type: diesel, tire size: 425/65 R 22.5, axle configuration: 8x4, wheelbase: 6,710 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 9,240 mm, total width: 2,510 mm, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, trailer coupling, = Additional Options and Accessories = - 8x4 axle configuration - Digital tachograph - Lifting axle - Air suspension - Hub reduction - PTO (power take-off) - Radio/CD player - Sun visor - Towing hitch = Further Information = Technical Details Number of cylinders: 6 Engine displacement: 12,882 cc Axle Configuration Front axle: Tyre size: 425/65 R 22.5; Steered; Left tyre tread: 45%; Right tyre tread: 45%; Suspension: air suspension Rear axle 1: Tyre size: 315/80 R 22.5; Twin tyres; Inner left tread: 60%; Outer left tread: 60%; Inner right tread: 60%; Outer right tread: 60% Rear axle 2: Tyre size: 315/80 R 22.5; Twin tyres; Inner left tread: 25%; Outer left tread: 25%; Inner right tread: 25%; Outer right tread: 25% Rear axle 3: Tyre size: 425/65 R 22.5; Steered; Left tyre tread: 50%; Right tyre tread: 50%; Suspension: air suspension Weights Unladen weight: 10,930 kg Payload: 28,070 kg Gross vehicle weight: 39,000 kg Djdpfszvct Ajx Akmewc Functional Crane: Palfinger / Epsilon Q170295TR, year of manufacture 2012, mounted behind cab Condition Damages: none

Condition: excellent (used), mileage: 711,722 km, power: 302 kW (410.61 HP), first registration: 10/2011, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, Year of construction: 2011, General information Number of doors: 2 Registration number: 1CAO110 Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 11.340 kg Carrying capacity: 14.660 kg GVW: 26.000 kg Max. towing weight: 44.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) Dedsz N S Dpspfx Akmjwc BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2010, power: 6.5 kW (8.84 HP), Long-belt sanding machine suitable for sanding both large containers as well as standard sheets and smaller components. The machine can also be used as a standard-height machine! Dwsdpfxjywzvho Akmjc

Condition: used, machine/vehicle number: 41225, with digital display, type: CHECKOMATIC 1200, max. grinding length: 420 mm, center height: 150 mm, with pivoting internal grinding spindle, belt filter system, and coolant system. Dwsdpfx Aksz Nhqlomsc

Condition: used, Year of construction: 2023, functionality: fully functional, power: 11 kW (14.96 HP), Siemens IEC three-phase asynchronous motor 3~Mot 1AV3162B 1LE1003-1DB23-4AB4 - 11kW Year of construction 2023 SIMOTICS GP MOTOR TYPE: 1AV3162B Low-voltage motor, IEC squirrel-cage rotor, self-cooled, IP55 thermal class 155(F) to 130(B) aluminum housing Premium Efficiency IE3, 4-pole * Frame size 160M, * 11kW (50Hz) 12.6kW (60Hz) Standard color RAL 7030, 3 AC 50Hz 400VD/690VY * 3 AC 60Hz 460VD IM B3 3 PTC thermistors for disconnection (2 terminals) Top terminal box Weight: 83kg We offer the low voltage motor. ⭐︎ Condition: Very good (used) The heating circuit pump is used but ready for use. The pump worked perfectly until it was removed a few weeks ago. Please refer to the rating plate for data. Scope of delivery as shown Inspection before purchase is possible and expressly desired. Dwsdpfx Aeu Eugzokmec All our items are dismantled, cleaned and visually inspected for damage by our company's expert staff prior to sale. Please refer to the description and pictures for all relevant item data / information. All information is given to the best of our knowledge and belief, the goods offered are sold as described and inspected. Shipping possible but buyer pays shipping costs.

Condition: good (used), Year of construction: 2021, functionality: fully functional, 21x Logopak 410 VM90 industrial label applicators (print & apply) – manufactured in 2021 A total of 21 identical Logopak 410 VM90 print & apply labeling systems are for sale. The units were manufactured in 2021 and put into operation in a modern logistics center starting in 2023. The labeling systems are being sold due to a process change and/or facility modernization. The systems are in working and well-maintained condition and can be inspected by appointment. Technical data: Manufacturer: Logopak Model: 410 VM90 – T01P06 Year of manufacture: 2021 Voltage: 100–240 V AC, 50–60 Hz Current consumption: 8 A Condition: Used Functional CE marking present Scope of supply: Logopak 410 VM90 label applicator Control cabinet with operating panel Machine frame Signal lamp as shown in the pictures Notes: A total of 21 identical units are available. Dwjdpfszltq Rsx Akmoc Sale individually or as a complete package is possible. Inspection possible by arrangement. We will gladly send further photos and technical information upon request.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Dedpfxozt I Rno Akmewc Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: excellent (used), mileage: 750,357 km, first registration: 05/2013, fuel type: diesel, wheelbase: 4,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, Year of construction: 2013, = Additional options and accessories = - PTO = Remarks = XLRAE85MC0E975224 = More information = Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Dwodpfjymqnqox Akmjc When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2012, turning diameter max. 356 mm turning length 1.255 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm distance between spindles 1.511 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 91 mm max. bar capacity 80 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm x-travel 260 mm z-travel 1.345 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 50 kVA weight of the machine ca. 7,8 t dimensions of the machine ca. 6,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 1250 Dwodpfx Akjz Dbqtemoc - Subspindle - WITHOUT extraction system

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min - Maximum pressure: 10 bar - Tank capacity: 500 l - Motor power: 2 x 5.5 kW - Power supply: 400 V Dodpfx Ajz Ek Drjkmjwc - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control - 1st unit: 428 operating hours - 2nd unit: 418 operating hours