Used Ima Shaped Part Edgebanding Machine for sale (73,541)

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for shaped profiles and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, inner radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable from 4 to 9 m/min, 2.6 kW, 400 Volt. Ncedpfxsvf H I Te Akysr

Condition: good (used), Year of construction: 2001, functionality: fully functional, MA HKA hand-held edge banding machine in fully functional condition. Edge banding machine for shaped parts Various pneumatic hoses have just been completely replaced. Edge thickness: 0.4 - 3 mm Panel thickness: 16 - 45 mm Strip feed: 20 - 50 mm Nedsx H Un Aspfx Akyscr Power consumption: 2.6 kW Minimum external radius: Depends on the flexibility of the edge material Minimum internal radius: 150 mm, depending on the material properties With support arm and spring balancer Vacuum clamping table with 4 switchable zones Rollers, vacuum pads (additional new rubber sets) for the vacuum table

Condition: new, Year of construction: 2026, min. / max. veneer thickness 0.4 - 3 mm min. / max. veneer height 12 - 47 mm (optional: veneering up to 60 mm) min. / max. material height 10 - 45 mm min. material width 100 mm min. material length 100 mm material pre-milling 2 motors with power (diamond cutter) 2.2 kW feed motor power 2.2 kW panel desk at eye level : chain feed : loading plate for PVC and ABS edges : mechanical pressure zone driven by the main pressure roller and a series of pressure rollers to minimize the glue layer : central pressure setting : container for glue granulate : glue application to the material using a glue roller : electronic temperature control, working temperature 180 - 200 °C pneumatic tape cutting guillotine : control lamp for element spacing : double trimming saw for cutting off front and rear excess material : precise linear guides : trimming in motion for high cutting precision : veneering speed 9.5 m / min flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm. scraper unit: polishing unit top / bottom 2 x 0.18 kW, 50 Hz, 2,800 rpm. height and tilt adjustment: extraction connector 3 x fi 120 mm, 1 x fi 100 mm, roller table extension 250 mm: Ncjdpev Dutbsfx Akyer noise-reducing housing with a window to view the units: trimming unit 0.44 kW glue roller unit 0.55 kW glue tank heater 2.2 kW compressed air connection 6.5 bar total power consumption 9 kW / 400 V dimensions L. 3590, W. 1220, W. 1686 mm weight 1100 kg • Pre-milling with counter-milling cutters placed on heads ensuring the highest quality of processing. • Front and rear cutting with a double saw. Upper and lower milling on a separate cutter. • Radial or flat scraper (to choose from). -polishing unit • Equipped with a control computer with an LCD display. • Very simple operation with switching on/off individual units with a single button. • In a word, an ergonomic and precise machine at a very favorable price offer, unmatched on the global market. • Standard function of a replaceable glue tank.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 0440298, table bore: 120 mm, table diameter: 500 mm, overall weight: 5,200 kg, gear diameter: 500 mm, TECHNICAL DETAILS Wheel diameter: 500 mm Minimum wheel diameter: 50 mm Maximum external ring diameter of processed gear with internal gearing: 800 mm Maximum distance from shaping axis to table axis: 355 mm Minimum distance from shaping axis to table axis: 0 mm Maximum number of teeth of processed gear: 300 Minimum number of teeth of processed gear: 12 Smallest module: 1.5 Largest module: 8 Table diameter: 500 mm Table bore: 120 mm Ncodpfx Akjyx U T Asysr Bore depth: 650 mm MACHINE DETAILS Weight: 5,200 kg

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Ncedertrxijpfx Akysr Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, machine/vehicle number: 008321, X axis working area: 4200 mm Y axis working area: 1350 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22 Nedpfjx A Tdlox Akyjcr

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Ncjdpfowuz Ekex Akyjr Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm Njdpsrtrvyefx Akyecr -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, machine/vehicle number: 007354, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 240 mm Max feed speed: 40 m/min Nodpfoyg Edasx Akyocr Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Year of construction: 2018, condition: good (used), Parts washing machine, full specifications available in the photos of the listing, model: CBR 60 T. The machine is in very good condition. Price is excluding VAT, invoiced. Ncodpfx Ajy D Afdjkyor

Condition: used, machine/vehicle number: 008495, X axis working area: 3050 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Ncjdpjy Edqqjfx Akyjr Total number of tool changer positions: 12

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction Njdpjudz D Ujfx Akyocr - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Year of construction: 2016, condition: reconditioned (used), functionality: fully functional, Description Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregate draws the lye from the washing tank and transports it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The soiled parts are radiated intensively with the hot lye from all sides with a uniform rotation of the motor-driven basket. After completing the cleaning process, the device switches off automatically. Advantage 1 pump arranged horizontally 3 three-dimensional stainless-steel nozzle tubes robust stainless-steel design additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, sprocket drive via separate motor intake filter in front of the pump shaft high injection pressure steam extraction stainless steel screen with filter basket water indicator Technical data Tank capacity 85 l Nedpfx Akshvzy Asyecr Basket diameter 780 mm Capacity 150 kg Temperature min. - max. 0-60 °C Working height 500 mm Dimensions (W x D x H) 1130x1010/1220x1150/1730 mm Weight 90 kg Heizleistung 4 kW Spray rate 4800 l/h Material Stainless steel Power supply 4,8 kW/ 400 V/ 50 Hz Pumpendruck 3,1 bar

Condition: used, -Year: 2000 Ncodjx Ttb Iepfx Akyer -2 rollers -Voltage: 380V -Power: 0.75 kW

Condition: excellent (used), Four-side planer WEINIG Quattromat 23 Max. planing width: 230 mm Max. planing height: 120 mm 4 heads, heads included Total power: 23 kW Manual vertical adjustment (up/down) Nsdpfx Akey E Nlaeyecr Manual adjustment of planing width Branded machine, maintained in very good condition

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 05/2027, working width: 700 mm, conveyor belt width: 700 mm, type of input current: three-phase, Croissant Winding Machine Universum HWM 50/70 EZ For all stick-shaped products such as Kornspitz, pretzels, and lye sticks, etc. Universal combination winding machine Suitable for all doughs for winding and long rolling Rugged technology Croissant winding machine for consistently high quality! Only with us: DGUV V3 tested Connection: 400V, 16A-CEE plug Used machine—refurbished & SAB tested with warranty and spare parts service Visit our large showroom! Ncsdpfjy Ebiwex Akyor

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 05/2028, working width: 500 mm, conveyor belt width: 500 mm, type of input current: three-phase, total width: 740 mm, total length: 840 mm, total height: 1,160 mm, Croissant Rolling Machine HWM 500 4C Suitable for all sticks such as Kornspitz, pretzels, lye sticks, etc. Universal rolling machine with infeed conveyor Single-operator machine For all dough types to be rolled Croissant rolling machine with 500 mm belt width Simple technology for consistent quality Stainless steel construction Only from us: DGUV V3 certified Connection: 400V, 16A-CEE plug Dimensions: 740 x 840 x 1160 mm (W x D x H) NEW machine & SAB inspected With warranty and spare parts service Nodpfoy Ebiqex Akyscr Visit our large exhibition!

Condition: new, Year of construction: 2026, Workpiece height 8-45 mm (optional: veneering up to 60 mm) Minimum workpiece length 100 mm Minimum workpiece width 100 mm Nsdpfxjv Duvve Akyjcr Edge thickness 0.4-3.0 mm Feed speed 9.5 m/min Cutting unit - engine power 1 x 0.27 kW Milling unit 2 x 0.35 kW Milling unit 12,000 rpm Corner finishing unit - minimum workpiece length 250 mm Corner finishing unit - minimum workpiece length 1 x 0.35 kW Corner finishing unit 12,000 rpm Pre-milling unit 1x 1.1;1 x 0.75 kW Pre-milling unit 12,000 rpm Edge cutting unit: Glue removal unit: Polishing unit - engine power 2x0.18 kW Polishing unit 2800 rpm Retractable support with rollers: Diameters of exhaust ports fi 120 mm Compressed air pressure 6.5 bar Total power 6.7 kW Dimensions - L x W x H 4200x800x1500 mm Weight 1180 kg + 2000 euros for option with a PUR glue

Condition: new, Year of construction: 2026, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Njdpfx Akjv Dt Speyocr Cutting Milling: two motors Radial scraper Flat scraper (glue) Spray system Polishing Interior lighting Automatic lubrication

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Nodex A Hggspfx Akyocr Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Price: On request Stroke: 1500mm Capacity: 10t - Year: 1963 - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 7.5kW - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information Nedoy Auy Rspfx Akyocr VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, planing width: 5,100 mm, overall weight: 1,055 kg, power of feed motor: 75 W, spindle speed (min.): 6,000 rpm, Wood-Mizer MP365 High-performance four-sided planer/moulder with additional fifth head Brand new machine Processing parameters: Four-sided: Planing width: 15–350 mm Planing height: 10–160 mm Two-sided: Planing width: 10–410 mm Nodpfxoy Emxkj Akyocr Planing height: 10–230 mm Single-sided: Planing width: 10–510 mm Planing height: 10–230 mm Feed speed: 3–15 m/min Technical parameters: Top spindle – straight knives 510 mm, 2 pcs, 6000 rpm Bottom spindle – straight knives 410 mm, 2 pcs, 6000 rpm Side spindles – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max side head height 160 mm Fifth spindle – 30 mm spindle, 3000/6000/9000 rpm, 270° tilt angle, max head height 130 mm Motors: Top spindle – 5.5 kW Bottom spindle – 4 kW Side spindles – 3 kW Fifth spindle – 3 kW Feed – 0.75 kW Total motor power: 19.25 kW 3 phase, 400 V, 50 Hz, 31.4 A Dust extraction ports – 4×100 mm, 1×125 mm Weight: 1055 kg Year of manufacture: 2025

Condition: excellent (used), functionality: fully functional, SCM Superset XL Four-Sided Planer Working width: 15–230 mm Working height: 6–120 mm Number of spindles: 5 Spindle arrangement: Bottom Right Left Top Bottom Spindle speed: 6,000 rpm Pneumatic pressure rollers Feed speed adjustable via variator: 5–25 m/min Nsdpfx Ajy E S R Eekyecr Driven by cardan shafts CE certificate

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 120 mm Number of spindles: 5 Spindle configuration: Bottom Right Left Top Bottom Feed speed adjustable via inverter up to 30 m/min Feed motor Drive through cardan shafts Pneumatic pressure rollers Ncsdoy E Sizepfx Akyer 3 axes controlled from the control panel (width, height, pressure roller position) CE certificate DTR documentation

Year of construction: 2025, condition: new, functionality: fully functional, load capacity: 75 kg, The Wave 450 parts cleaning unit is a very flexible vacuum assisted degreasing machine able to perform an high degree of parts decontamination. All the operations such degreasing cycle as spray, immersion jets, ultrasonic, as well the distillation and filtration process and parts drying treatment are sequenced in automatic way and in a total vacuum ambient. The Wave 450 machine can operate with: Modified Alcohol solvents (MA) / Hydrocarbons Class III (H-III) / Chlorinated (PER) Those solvents are specifically used when the demand calls for a strong degreasing phase, evaporate completely without leaving debris residues on the processed parts. Nedpowc Sdaefx Akyecr Standard features  Continuous solvent distillation  Full solvent distillation  Sludge stripping 2nd distiller Oil/solvent separation  Full solvent filtration at each cycle  Chip drying and deodorizing before emptying by the operator  Chip drying and deodorizing before opening / cleaning by the operator  Vacuum / solvent charging - discharging system  Water/solvent separation Distillation The distillation of the solvent enalble to maintain unchanged the degreasing power of the solvent. All our systems offer the double stage distiller as standard, guaranteeing the separation between solvent and oils, further expulsion of water takes place in the water separator. PLC S7 and HMI 12" Siemens are a standard feature The machine is compliant to Industry 4.0 and so Industry 5.0. Basket dimension is: mm 480 x 300 x 200 H