Used Ims Hy45E for sale (534)

Condition: good (used), punching force: 45 t, - Capacity 45 tons Psdpfx Asu Havwsi Terc - Hydraulic - 4 stations - Foot control - Emergency stop - 400 V

Condition: excellent (used), Year of construction: 2006, Equipment: emergency stop, foot remote control, Capacities: Force: 40 tons Punching: Ø32 x 11 mm Cutting of flat material: 200 x 13 mm 300 x 10 mm Angle iron: 80 x 80 x 8 mm Solid material: Ø 30 mm 30 x 30 mm Includes length stop. Psdo Adrfzepfx Ai Terc

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: foot remote control, Hydraulic punch and shear machine in good condition. Podpfxoz S Izpe Ai Terc

Condition: used, Year of construction: 2025, OPTICAL MEASURING MICROSCOPE SINOWON iMS-3020C Optical measuring microscope with image processing (2.5D), manufactured in , a used machine in excellent condition for precise optical measuring tasks. Measuring range 300 x 200 x 200 mm, operation via a PC workstation with measuring software. TECHNICAL DATA - Manufacturer / Model: Sinowon iMS-3020C - Year of manufacture: - Design: optical measuring system with camera (2.5D image processing) - Measuring range X/Y/Z: 300 x 200 x 200 mm - Control: PC-based (image processing) - Software: Measuring software on PC workstation SCOPE OF DELIVERY Podpfs Agckvex Ai Terc Included in the scope of delivery: - Machine with camera and lighting unit - PC workstation with monitor and measuring software Not included: - Commissioning - Training / Instruction - Transport CONDITION Used machine, year of manufacture . The machine was photographed during operation, and the measuring software was running. Known defects: none documented. Inspection possible by arrangement. PROCESSING Inspection possible by arrangement at the Leonberg location. We will handle dismantling and loading; transport available upon request. ABOUT KMT Kneissl Messtechnik is a specialist in industrial measuring technology – used machines with personal consultation, DAkkS calibration service, and optional instruction and installation.

Condition: used, functionality: fully functional, ---IMS PHY 1100 PUNCHING MACHINE, YEAR 2008, MAX PUNCHING 32X26 mm. Overall dimensions 185X75X210(h) cm, Machine weight 1800 kg ---IMS HY 45 VS PUNCHING MACHINE YEAR 2005 Hydraulic single punch Power 45 ton 5 work stations (slotting, angular cutting, bar cutting, shearing) Punching diameter 32 mm X 12 mm Slotting 50X40 x 6 mm Psdpewn Hu Rsfx Ai Torc 90 degree angular cutting 80 mm X 80 mm X 8 mm Plates 300 mm X11 mm Swan neck 170 mm Controlled or free descent Self-moving extractor Adjustment of punch upper dead point Check squares Motor power 4 kW Overall dimensions 100X60X180(h) cm, Machine weight 500 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 4523, punching force: 80 t, sheet thickness steel (max.): 20 mm, Equipment: CE marking, foot remote control, IMS model HY 80 Prsdpfx Aiszkwtte Tjc

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, TECHNICAL FEATURES: Press Model: T25-VE Year of construction: 1996 Nominal force: kN 250 Free passage between the uprights mm: 220 Distance between the axis of the connecting rod and the uprights (notch) mm: 160 Dimensions of the mallet mm: 250x130 Prsdsttwfyepfx Ai Tec Worktable dimensions mm: 500x310 Minimum distance between worktable and mace with high adjustment and mallet all the way down mm: 275 Mace adjustment mm: 50 Adjustable stroke mm: 0÷60 Shank hole diameter mm: 40 No. strokes per minute: 155 Engine power KW: 1.5 Total mass Kg: 950 Operating voltage V: 380 Frequency Hz: 50 Dimensions mm: H=1890; L=1000; D=980 Lubrication pump motor power Kw: 0.09 Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts. NEW COMPONENTS INSTALLED: - Front and side safety guards with safety keys; - Motor bearings; - Tang locks; - Flywheel bearings; - Flywheel belts; - Work surface brightened on CNC machine

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 1,100 mm, measuring range Y-axis: 1,100 mm, measuring range Z-axis: 750 mm, table load: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring range, X-axis: 1,100 mm Measuring range, Y-axis: 1,100 mm Measuring range, Z-axis: 750 mm Travel length, X-axis: 1,100 mm Travel length, Y-axis: 1,100 mm Travel length, Z-axis: 750 mm Max. traverse speed: 350 mm/min Table length: 2,050 mm Table width: 1,100 mm Max. workpiece weight: 2,000 kg Table load: 2,000 kg Distance between columns: 1,100 mm MACHINE DETAILS Input current type: Alternating current (AC) Input voltage: 400 V Podpfx Aezy Ezdji Terc Compressed air connection: 6 bar Operating pressure: 6 bar Operating temperature: 22 °C Ambient temperature: 16–30 °C Dimensions & Weight Dimensions (L x W x H): 2,050 x 1,890 x 2,700 mm Total weight: 2,800 kg Year of last overhaul: 2013 EQUIPMENT Virtual DMIS Software V7.0 OnMotion Upgrade Kit with Servo Tower, Joystick Box, and interface cables PC with OnMotion hardware and Virtual DMIS V7.0 5 used TP20 measuring probes Documentation / Manual Nameplate Note: Due to age, the cables between the machine and the controller are stiff and brittle. Disconnecting and transporting them may result in the need to replace individual connection cables or connectors. However, this can be done easily with some knowledge.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000464, Max. pipe diameter Ø 42 mm Min. pipe diameter Ø 6 mm Max. pipe thickness 2.5 mm Max. bending radius 270 mm Min. bending radius 25 mm US metric: Max. pipe diameter 1.654 inch Min. pipe diameter 0.236 inch Max. wall thickness 2.5 inch Max. bending radius 10.63 inch Min. bending radius 0.984 inch Throughput: 42; Rotation angle: 187°; Digital display: yes; Prjdpfx Aiovmpbro Toc Motor power: 95 kW; Electrical connection: 380 V; Machine weight: 1550 kg; Dimensions: 4700 mm; Width dimension: 800 mm; Height dimension: 1300 mm;

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h Pjdpfx Aio Aazd Ee Tjrc *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg Prjdpfx Aievg Rh Te Toc New, unused

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Oil mist and fume extraction unit for CNC machines, Plymovent brand separator filter. Predpfj Ad Dnbsx Ai Tec Designed for purifying air from metalworking processes involving high-viscosity, contaminated, or burnt oil, including: CNC machines for cutting, drilling, and sharpening; metal forming machines; oil mist generated by heat and surface treatment. Simple to operate and reliable filter design. Filter housing made of galvanized steel sheet coated with powder paint. The filter is equipped with a pressure gauge indicating the filling level of the filter element. Fan in a sound-absorbing housing, 4 kW (three-phase) POWER: FA-6000 Capacity up to 6000 m3/h Inlet diameter - 250 mm Dimensions: Filtration unit: 0.85m x 0.70m x h-2.41m Fan: 1.20m x 1.10m x h-1.30m Stock number: 0027

Condition: good (used), Year of construction: 2001, Table 950x650 mm, ram 610x410 mm, stroke 0-140 mm Podpfxsqgcaas Ai Tjrc

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Pedpfxjz N Am Uj Ai Torc Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 64 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Nederman dust extraction unit, fume extraction system, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, and catalysts, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Fan power: 5.5 kW Capacity: up to 5000 m3/h Vacuum: up to 3000 Pa Cartridge filter elements: 16 pcs Filtration area: 64 m2 Pedpoz R T Elofx Ai Torc Inlet diameter: 315 mm Dimensions: Length: 1.60 m Width: 1.65 m Height: 3.40 m Base: 1.32 m x 1.12 m Stock number: 1174

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Prjdsz Nxxaopfx Ai Toc Inlet diameter: 300 mm Stock number: 1172

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. Predpfez Trrhox Ai Toc The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 60 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 400 mm, filter area: 84 m², actuation type: electric, total height: 4,400 mm, total length: 1,400 mm, total width: 1,500 mm, overall weight: 1,500 kg, Equipment: CE marking, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The Absolent dust filter is based on the latest and most efficient filtration technology. This solution works particularly well in installations operating in continuous mode (24/7). Dust-laden air is drawn in through an inlet located in the upper part of the filter. The heaviest dust particles fall directly into the dust collection container. The air, along with lighter particles, is directed further towards the filter cartridges, where the dust settles. The filtered air is then removed from the device through an outlet using an external fan. When the pressure drop across the filter cartridges exceeds the set limit value, valves open in the cleaning air tank, and a pulse of compressed air is released from the cleaning nozzles. This pulse causes the accumulated dust to detach from the filter surface and fall into the dust collection container. Psdpfxe Ady Dle Ai Tjrc Range of applications: The Absolent A•dust is ideal for processes that generate dry dust, such as: • Welding • Laser and plasma cutting • Grinding and polishing Brand: Absolent Model: A•dust5 Parameters: Fan with a power of 18.5 kW. Capacity: 6000 m3/h Vacuum: 6000 Pa Filtration area: 84 m2 Included: Partial ductwork Summer/winter flap Stock number: 1175

Year of construction: 2008, condition: used, functionality: fully functional, suction capacity: 4,000 m³/h, Oil mist extraction unit for CNC machines, ScandMist MA 400D filter separator. Fan with a power of 7.5 kW. Inlet diameter: 315 mm. Capacity: 4000 m3/h. The unit is equipped with a frequency converter. Several units of this device are available (the price stated is for 1 unit). The ScandMist filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, which results in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency and can operate continuously without interruptions. Podpfez R Rlvex Ai Tjrc The liquid collects at the bottom of the filter and can be reused for operation. These units use a 3-stage mechanical filtration process. Stock number: 1176 (3/3)

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Podpoz Nx S Tjfx Ai Torc The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Fan model: ART 632/N4 Capacity: 16,000 m3/h Noise silencer included. We also offer new filter inserts on request, tailored to the intended use of the equipment. Stock number: 0018

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Model: Delta Comp 1500-5/9 SB Predpfx Aiszpxdke Toc Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Height: 2.16 m Width: 1.05 m Depth: 1.92 m Weight: 1200 kg Stock number: 1158

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, volume flow: 1,000 m³/h, Equipment: documentation/manual, Welding fume extractor, dust collector, filter, pneumatic, vacuum-based, IVAT. For welding, grinding, and all types of dry dust. Filter cleaned pneumatically with compressed air (manually). Model: Flex-22 Year of manufacture: 2018 Fan power: 1.1 kW Capacity: 1000 m3/h Cartridge-type filter element. Pjdpfx Aioz R Shls Tjrc Extraction arm, approximately 2.5 m long. Stock number: 1168

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Podpfx Aezf Hn Aji Tjrc Stock number: 0008

Condition: used, Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, filter area: 286 m², suction capacity: 7,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit, self-cleaning filter, pneumatic, vacuum-operated for continuous operation, from the renowned Donaldson Torit brand. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and for all types of dry dust. The fan is located behind the filter on the clean air side, minimizing the risk of explosion. The filter cartridges are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Fan power: 9 kW Flow rate: 7000 m3/h Inlet diameter: 350 mm Psdpfxjz Hkgie Ai Tsrc Number of filter cartridges: 12 Filtration area: 286.8 m2 Year of manufacture: 1999 Dimensions: Width: 2.10 m Depth: 2.50 m Height: 3.37 m Base: 2.11 m x 1.52 m Stock number: 1171

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 26-291510 R 1368710, Rod-type magazine for bar feeders, FMB TURBO 5-55/3200"A" Predpfx Aeznl Uaei Tjc Magazine for bar feeders, FMB TURBO 5-55/3200"A"