Used Inclined Chain Buffer for sale (3,893)

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry Dcsdetp S E Eopfx Aqceh – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: used, 2012 De Gouwe Jacketed Stainless Steel Buffer Tank Jacketed Stainless Steel Year 2012 With ancillary equipment Dsdpfswq Slasx Aqcoch

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block. Dcodpfswd Tgfjx Aqcoh

Condition: used, Chain conveyor - IDL000773 Dsdpfxoufib Ro Aqcech - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw.

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Dsdpfev Nw Npex Aqcoch Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm Dsdjwwaruepfx Aqcech weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2006, Column-swiveling crane, SchmidHandling, with Demag chain hoist, 125kg – used: Price ex works: €1,750.00 (net)! Manufacturer: SchmidHandling Type: (to be specified) Year of manufacture: 2006 Factory number: 61482006 Dedpfjzbyfuex Aqcech Load capacity: 125kg With Demag electric chain hoist 125kg Outreach: to be specified Condition: good Available: from approximately August 2026 Location: Leipzig

Condition: new, Year of construction: 2008, total length: 12,547 mm, conveyor belt width: 350 mm, Unused Mayfran CT-20 conveyor chain, 2" pitch (50.8mm), Dcodpfxjzbiw Hj Aqcjh conveyor width 350mm. Left over from an installation, has been stored as surplus stock.

Condition: used, Year of construction: 2020, operating hours: 5,000 h, * Liebherr R920 Compact LC tracked excavator * Year of manufacture: 2020 * 4,990 operating hours * 22,400 kg * 110 kW * OQ65 fully hydraulic quick coupler * Variable-geometry boom * Blade * Central lubrication system * Refueling pump * Air conditioning * 3 m undercarriage width * 75 cm track pads * 180° camera Dsdpfxezbwn Hj Aqcoch * Undercarriage in very good condition * Maintained according to service schedule

Condition: used, Year of construction: 2013, operating hours: 12,489 h, Caterpillar 308 E2 tracked excavator (rubber tracks) with a blade * Operating hours: approx. 12,489 h * VIN: CAT0308EATMX01275 Equipment: * Rubber tracks * Dozer blade * Quick coupler * Powertilt * 4 buckets included * Year of manufacture: 2013 Djdpey I Ibfsfx Aqcoch Weight: * Operating weight: approx. 8,300 kg Net price* All information without guarantee. Tel.: call (Contact · Phone · Mobile · WhatsApp)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 60 mm, total width: 685 mm, total height: 160 mm, total length: 1,900 mm, conveying length: 1,900 mm, construction width: 685 mm, construction height: 160 mm, input voltage: 24 V, empty load weight: 90 kg, Manufacturer: TAF Year of manufacture: 2025 Overall dimensions (LxWxH) in mm: 1,900 x 685 x 160 Width including side rail in mm: 685 Side rail height in mm: 140 Conveyor length in mm: 1,900 Conveyor width in mm: 600 Conveyor height in mm: min 160 to 1,100 Roller pitch in mm: 60 Support roller axle type: Steel Support roller diameter: 50 mm Support rollers per axle: 1 Support roller material: Steel Drive: Poly-V belt Motor type: 24V motor roller Dcsdpfxjza Duke Aqcsh Motor specifications: Kyowa Pulse roller Conveyor speed in m/s: 0.6 Net weight in kg: 90 Special features: 80° inclined roller conveyor Condition: used / fully functional Functional test: OK

Condition: used, operating hours: 12,870 h, Due to the large number of non-serious emails / Emails will not be answered WhatsApp German machine Fully functional Dodpfowt Ip Tjx Aqcoch Ready to drive Width = 4m / Cabin height 3.75m "SUBJECT TO ERRORS, TYPOS AND PRIOR SALE"

Condition: used, Year of construction: 2017, operating hours: 13,900 h, * Cat 308 E2 excavator * Rubber tracks * Equipped with a Powertilt Dsdjzbwzgopfx Aqcoch * Quick coupler * Dozer blade * Air conditioning * 3 buckets included * VIN: CAT0308ELFJX03115 * Hours: 13,900 h * Year of manufacture: 2017 * Windshield cracked * Price (net) * All information without guarantee Tel.: call (Contact · Phone · Mobile · WhatsApp)

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), operation weight: 32,264 kg, Year of construction: 2022, operating hours: 4,950 h, Equipment: UVV, Year of manufacture: 2022 Engine power: 284 hp (208.8 kW) Operating weight approx. 32,265 kg Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Swing speed 9 rpm Max. travel speed 5.2 km/h Rear and side camera LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Engine: Cummins QSL9-C280 engine Water-cooled, 6-cylinder, with common rail injection and Adblue Stage V Power 209 kW / 285 hp; 2100 rpm 1,472 Nm / 1400 rpm Displacement 8,900 ccm Sensor-controlled idle automatic Cyclone pre-filter Hydraulics: State-of-the-art, optimized, demand-flow-controlled hydraulic system (positive flow controlled) Dcodpozaqlisfx Aqcoh Hydraulic load sensing Max. oil flow 2x 280 l/min Max. oil flow AUX1 500 l/min 1st proportional auxiliary control circuit for grab/hammer on joystick 1 2nd proportional auxiliary control circuit on joystick 2 Safety check valves for stick and boom with overload indicator Quick coupler hydraulic circuit, double-acting Adjustable oil flow rate for attachments Adjustable oil pressure for attachments Convenient switching of hammer/shear hydraulics in the display Hydraulic pre-control of the joysticks 10x additional circuit flow rate settings via on-board computer with multi-function monitor Swing brake 2 travel speeds Upper and lower carriage: Boom 6,150 mm, stick 3,200 mm, max. reach 10,870 mm Heavy-duty undercarriage and equipment with wear strips Steel tracks 600 mm Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Rear and side camera Battery main switch Fueling pump with automatic overflow protection Tool compartment Driving alarm and rotating beacon LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Transport dimensions: (L x H x W) 10,667 x 3,225 x 2,990 mm Operator cabin: ROPS Engine emergency stop switch 12V socket Document compartment Radio, Bluetooth-enabled with hands-free function for smartphone with speakers Automatic climate control Heater Tilting front window Large 10" high-resolution touch display Joystick adjustment independent of seat adjustment Floor mat Cup holder Air-suspended seat with fabric cover and seat heating

Condition: ready for operation (used), Column chain cutter with various cutter sets Dodpfeu Imzvsx Aqcoch

Condition: used, Year of construction: 2019, operating hours: 8,100 h, Internal vehicle number: G400192 German vehicle Available immediately at our yard in Kaufungen - Kassel More information at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) CATERPILLAR 320 Track Excavator Year of manufacture: 2019 8,100 hours 22.1 tons Financing example: * Internal number: G400192 * Purchase price: €69,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €1,057.02 * Residual value: €13,380.00 If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). Dcedpfx Aszahhbjqcjh We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June: Horstmann chain belt conveyor, year of manufacture 2011 Dcodoy Uwqpopfx Aqcsh Manufacturer: Horstmann Year of manufacture: 2011 Length of feed belt: approx. 3000 mm Length of incline section: approx. 5000 mm Gooseneck: approx. 1000 mm Belt width: 1100 mm Conveyor speed: approx. 0.2 m/s (max. 0.3 m/s) The conveyor is currently still in operation and can be inspected while running until 06/05/2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Year of construction: 2014, operating hours: 9,199 h, CAT 314ELCR from year 2014 with only 9,199 operating hours: ----* Manufacturer: CAT * Model: 314ELCR * Year of manufacture: 2014 * Displayed operating hours: approx. 9,199 * Incl. 1 x digging bucket approx. 65 cm * Incl. hydraulic quick coupler Verachtert * Dozer blade * Mono boom * Hammer piping (auxiliary hydraulics) * Air conditioning - A/C * Transport width: approx. 2.50 meters * Further photos and video available on request * Price: 39,900 Euro, net + 19% VAT Dsdpfoy Uqd Nox Aqcjch ----For further questions please call: For more questions please call: Erik Kortum: WhatsApp All information without guarantee or warranty. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 1978, Machinetype: chain link fence machine Double spiral Manufacturer : WAFIOS Type: VDF80 Constr. year: 1978 wire diameter: 1,6-3,8 mm mesh width: 20-80 mm Dcsdpfx Ajvdtaasqcjh working width: 2000 mm capacity: 160 m²/h

Condition: excellent (used), Year of construction: 1978, Technical details : Dedpfsk D T Nnjx Aqcoch Capacity - 110 m2/h Max. width of mesh - 2.000 mm Mesh opening size - 30-100mm Motor power - 4 kw The machine is adjusted to work the grass fence Excellent condition

Condition: good (used), Year of construction: 1979, Complete production line for Technical and Commercial Chain Manufacturer - WAFIOS / VITARI / DANIELI / IPSEN Year - 1979/1989 Factory Consists : - Welding machines 14 pieces - Bending machines 10 pieces - Bending + welding machines - 2 pieces ( Wafios KEH3 +KER3 ; Wafios KEH5 + KER5 ) - Wire drawing line 7 blocks - Danieli with spooler Dcodpeqy E I Uofx Aqcjh - Cementation furnace - Annealing furnace Lots of sapare parts

Condition: excellent (used), Year of construction: 1980, WAFIOS DF5 Wire range- 1,5- 5,0 mm Dcedpov Uw Ddsfx Aqceh Mesh with - 20 - 100 mm Working with - max.2000mm Capacity - 170 m2 / hour Tooling for the mesh width - 60 mm

Condition: ready for operation (used), Chain Hoist, Rema Star 111/54, 4 Meters, 3200 kg, Used Machine Manufacturer: Rema Dodpfxjxxkw Ij Aqcjch Model: Star 111/54 Overall Dimensions: Width: 710 mm Depth: 360 mm Height: 460 mm Electrical Data: 380V; 4.4 kW; 10.5A Load Capacity: 3200 kg Lifting Height: 4 m Year of Manufacture: 2008

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, 2 pieces electric chain hoists with travel motor Manufacturer: LIFTKET Type: K 3000 Year of manufacture: 2008 Chain hoists with fast and fine lifting, travel motor, with radio control, in very good condition. Lifting height: 3 meters Load capacity: 3000 kg. Dsdpfxsxr Dw Uj Aqcjch

Condition: used, overall weight: 69,000 kg, Year of construction: 2007, operating hours: 9,379 h, Engine: Isuzu, 6 cylinders, 345 kW – AH-6WG1X – EPA and CE compliant Boom: 6.58 m Stick: 3 m Ground plates: 650 mm All hydraulic lines (hammer/grapple and rotation) Hydraulic quick coupler: OIL Quick OQ90 or Lehnhoff HS80 Deep digging bucket – 4.55 m³ SAE Transport weight: 69 tons Dcsdpfx Asul U H Toqcoh Transport width: 3.93 m Working width (4.14 m with outriggers) Transport height: 4.37 m The machine has been overhauled and repaired in our workshop. Report available upon request. Major inspection performed: All oils and filters replaced, including 650 liters of hydraulic oil. CASE Germany, March 2026: The engine has 6 new fuel injectors (invoice available upon request).