Used Infrared Vortex-Evaporator for sale (655)

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Hettich CombiDancer Infrared Vortex-Evaporator with PoleStar Cold-Trap System (2005) For sale is a complete Hettich CombiDancer high-speed evaporation system (Hettich AG, Switzerland) — a premium parallel evaporator for rapid, gentle, and reproducible solvent evaporation, from light volatile ethers to high-boiling solvents such as DMF and DMSO. Decommissioned from a chemistry laboratory in fully functional condition with no known faults. Formally decontaminated (written certificate included). Never used in a biological or isotope environment. Highlights • Complete, ready-to-run system: CombiDancer + PoleStar cold-trap + diaphragm pump + rotary vane pump • 3–10× faster than conventional rotary evaporators; no sample balancing, no rotating parts in the chamber • Accepts large tubes, HPLC vials, Falcon tubes (15/50 ml), Eppendorf tubes, scintillation vials, microtiter/deep-well plates • Three independent heating zones (halogen IR, compartment heater, heated shaker plate) • PoleStar freezes solvents to –45 °C; rotary vane pump reaches 0.01 mbar for high-boiling solvents Hnjdpfx Apey Nmi Re Hen • Original paper manuals (CombiDancer & PoleStar) included CombiDancer Specs • Vacuum chamber: V4A stainless steel, Ø 360 × 180 mm • Vortex: 200–1,000 rpm • Temp: 20–80 °C • Vacuum: DN25 • Gas fittings: 2× 6 mm Swagelok • RS232 (VP, CT, PC) • 230 VAC / 1,800 VA • 765/930 × 695 × 470 mm / 78 kg PoleStar Cold-Trap Specs • Capacity: 3.3 L • Cooling: –45 °C • Vacuum: 0.01 mbar • Vessel: aluminium FEP-coated • Coil: V4A stainless steel • 230 VAC / 660 VA • 520 × 430 × 530 mm / ~45 kg Pumps Included • Vacuubrand PC2003 VARIO + CVC 2000 controller (oil-free diaphragm, auto vapor sensing) • Vacuubrand RZ 6 (rotary vane, deep vacuum) Scope of Delivery • CombiDancer unit • PoleStar cold-trap • both vacuum pumps • mobile cart • original manuals • decontamination certificate Typical Applications • Analytical chemistry / SPE • combinatorial chemistry / HTS • pharma R&D • natural product & botanical extract workflows • food, cosmetics & life sciences

Condition: good (used), Year of construction: 2016, Vortex Robopop Mark IV popcorn machine 2016, stainless, hot air popper for making popcorn, up to 28Kgs per hour, 3Ph Hnedpfxjy R Elao Ap Hon

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 92 880 13, opening: approx. 1.030 x 720 mm rotor-Ø x –width: 1.000 x 1.000 mm weight: approx. 13 t. Hnedpfx Ajlhrufop Hon

Condition: used, Year of construction: 2013, Model: UTAH Year of manufacture: 2013 Hjdpfx Apoqrpd Ss Henn Cooling capacity: 14,4 kW Dimensions: 1305 x 700 x 345 mm Weight: 66 kg.

Condition: excellent (used), functionality: fully functional, We offer the Vortex D2 Duo – a fully automatic cook, quench & chill machine designed for the continuous and repeatable cooking, quenching, and chilling of food products. This solution features a DUO design, in which the cooking section is mounted on a separate frame from the quenching and chilling sections, ensuring a very high level of separation between high-temperature and low-temperature processes. The Vortex D2 Duo model was developed primarily for processing short and long pasta, but thanks to its versatility, it is also ideal for products such as rice, noodles, legumes, grains, vegetables, potatoes, and seafood. As a result, the machine can operate in both pasta and ready-meal production facilities, as well as in modern convenience food plants and among producers of salads and chilled components. The Vortex D2 Duo has a capacity ranging from approximately 250 kg/h to 4000 kg/h, allowing the system to handle both medium and very high production volumes. The Vortex is equipped with a programmable Vortex water flow system, which ensures uniform cooking, cooling, and chilling of each product batch. This system minimizes clumping, product damage, and yield losses, and its highly efficient cooling typically achieves a product temperature of approximately 3°C. The Vortex D2 Duo can operate with conveyor feeding or with automatic batch loading of product into containers, which facilitates precise control of throughput and process organization. Additionally, vibrating dewatering conveyors enable operation in both batch and continuous modes, allowing the line to be easily adapted to subsequent production stages such as mixing, dosing, packaging, or final cooling. Also noteworthy are design solutions that enhance process quality and hygiene, such as hydraulic basket lifting, shell-and-tube heat exchangers, double degreasing overflows, and specially shaped water tanks. Hygienic, stainless steel construction and washdown-ready protection, which is of great importance in facilities operating under high sanitary standards. Key advantages of the Vortex D2 Duo separate frames for the cooking and cooling sections, high-quality separation of high- and low-temperature processes, ideal for short and long pasta, as well as rice, vegetables, potatoes, grains, pulses, and seafood, capacity up to 4000 kg/h depending on configuration, programmable Vortex water flow system, Hnsdpfxey Df Nre Ap Hsn highly effective product cooling to approximately 3°C, capability for batch and continuous operation, hydraulic basket lifting and efficient drainage, hygienic, industrial design for continuous operation. Vortex D2 Duo is an advanced production line for manufacturers seeking consistent cooking, rapid cooling, high throughput, and excellent final product quality in a modern pasta and convenience food production process

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available. Hnedpozcwitefx Ap Hsn

Year of construction: 2009, condition: ready for operation (used), A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible. Hnedpfozdknqjx Ap Hsn

Condition: good (used), Year of construction: 2021, Univap TCM/E 5ED Evaporator with electric defrost unit Hnodpfeuliazox Ap Hsn 2021, Evaporator with electric defrost unit, comes with controls and external KD external fridge plant

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Hedpoynkbmofx Ap Hsnn Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: new, functionality: fully functional, Year of construction: 2026, Pothole Repair Complex MIRA-3 Pothole Repair Complex MIRA-3 by TICAB TM is a unique road repair system developed by TICAB engineers for optimization of road patching works. MIRA-3 complex includes infrared asphalt heater, asphalt recycler and bitumen emulsion sprayer. How to use MIRA-3 Complex: - Heating of the repair place. - Add a hot asphalt from the asphalt recycler. - Spraying the bitumen emulsion. Hodpfx Apot Itzze Hsnn MIRA-3 includes: - Infrared Asphalt Heater MIRA-3. - Bitumen Emulsion Sprayer BS-100. - Asphalt Recycler RA-500.

Condition: new, functionality: fully functional, fuel type: gas, Year of construction: 2026, Equipment: 4 in one shovel, Infrared Asphalt Heater MIRA-1 Infrared Asphalt Heater MIRA-1 by TICAB TM is compact and powerful device. Best for small patch repairs. It is quite reliable and highly effective in use SPECIFICATIONS: - Propane fuel. - Controls - mechanical. - 2 gas bottles. - Consumption - 5-5.5 kg / h (depending on the outside temperature). - Weight 120 kg. Effective in the repair of: • Potholes. • Raising manhole and utility covers. • Failed pavement joints. • Joint asphalt repair. Hedeq Rcrqepfx Ap Hsnn

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 1,750 mm, total height: 550 mm, total width: 900 mm, volume flow: 5.86 m³/h, cooling capacity: 21.5 kW (29.23 HP), water connection: 35 mm, pressure: 16 bar, 2 fans evaporator Güntner GGHN 040.2H/27-ANW50 wall/ceiling air cooler year of manufacture: 2012 2x fan VT0398U power: 21.5kw Hodet Tf A Iepfx Ap Honn volume flow: 4.6m3/h air volume flow: 5860m3/h throw distance without streamer: 12m volume: 20.8lit. max/min pressure: 16 bar/-1bar max/min temperature: 100°C/50°C test pressure: 17.6bar sizes length: 175 cm width: 90 cm height: 55 cm

Condition: new, Air Cooler, Evaporative Cooler, Indoor Cooling Unit, Used Appliance Manufacturer: Govers Type: ET8 Year: 2004 Dimensions: 2260 x 830 x 260 mm In manufacturer's packaging, new device. Hnedpfx Apoqvmzfe Hsn

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), Airrex AH 800i Mobile Infrared Heater Tank: 70 l Output: 22 kW Suitable for spaces up to 2000 m³ Highly economical – fuel consumption 1.7 – 1.9 l/hr Dimensions (LxWxH): 130 x 35 x 134 cm Weight: 81 kg Adjustable temperature range: 0 – 40°C Mobile, mounted on caster wheels Hnjdpfxeylv Dzo Ap Hsn Ready to use immediately – just plug in and switch on Clean combustion – no chimney required! App-controlled – set temperature, receive notifications, and check fuel level directly on your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no combustion odors Complies with the latest EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), Airrex AH 300i Mobile Infrared Heater Tank: 45 l Output: 15 kW Suitable for spaces up to 1500 m³ Highly economical – fuel consumption 1.05 – 1.24 l/hr Dimensions (LxWxH): 95 x 30.5 x 101 cm Weight: 46 kg Adjustable temperature range: 0 – 40°C Mobile, equipped with swivel casters Ready for immediate use – just plug in and switch on Clean combustion – no chimney required! App control – set temperature, receive notifications, and check fuel levels directly from your smartphone Hnsdpfx Apsylv Iye Hsn Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no burning smell Complies with the latest EU emissions directive Automatic restart after power outage

Condition: used, Year of construction: 2011, Passage width: 3000 mm. Passage height: 30 mm. Inlet section to the system: Length approx. 2250 mm. Outlet section: Length approx. 3970 mm. Hedpfxjwptxle Ap Henn Total length: approx. 10,220 mm.

Condition: used, Evaporator Guntner -Type: S-GHN 071B/27-E -Cooling capacity: 39.7 kW at DT8, 31.5 kW at DT7 -Fin spinning: 7 mm Hnedpfx Apsza D Uko Hsn -Fans: 2 x 710 mm -Dimensions: 3530 x 850 x 1150 mm -Electric defrost -Refrigerant: Freon -Volume: 54 L -Weight: 317 kg -Quantity in stock: 2 -Reference number: CH 606 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: used, Evaporator Guntner -Type: S-GHN 071.2H/27-EHS50.E Hedpfxezaz U Ij Ap Henn -Cooling capacity: 50 kW at DT8, 40.2 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3500 x 1060 x 970 mm -Electric defrost -Refrigerant: Freon -Volume: 71.5 L -Weight: 387 kg -Quantity in stock: 4 -Reference number: CH 605 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: used, Two-side evaporator Goedhart -Type: DRS 52504 -Cooling capacity: 22.7 kW -Fin spinning: 4 mm -Fans: 2 x 500 mm -Dimensions: 2260 x 1600 x 530 mm -Stainless steel housing and block -Volume: 28 L Hnodpfxexpughj Ap Hsn -Quantity in stock: 5 -Reference number: CH 571 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: excellent (used), Evaporator Thermofin -Type: TEN 050.1-E-2-7 -Cooling capacity: 18.6 kW at DT8, 14.7 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 500 mm -Dimensions: 2450 x 660 x 670 mm -Volume: 28.2 L -Weight: 134 kg -Quantity in stock: 6 -Reference number: CH 551 Hnjdpfx Apewkp Sws Hen -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: excellent (used), Evaporator Guntner -Type: S-GHN 081B/37 -Cooling capacity: 82.3 kW at DT8, 63.7 kW at DT7 -Fin spinning: 7 mm -Fans: 3 x 810 mm -Dimensions: 5450 x 1000 x 1300 mm -Refrigerant: Freon -Volume: 112 L -Weight: 619 kg Hsdpfx Aswhunxsp Henn -Quantity in stock: 1 -Reference number: CH 548 -Condition: Used in good condition

Condition: used, Evaporator GEA KUBA -Type: SGBE 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3020 x 1000 x 1000 mm -Block made of stainless steel Hsdpfx Apsyx S Evs Honn -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 1 -Stock number: CH 597 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Evaporator Goedhart -Type: VNS 65407 E Hjdoyybd Dspfx Ap Hjnn -Cooling capacity: 27 kW at -8°C -Fin spinning: 7 mm -Electric defrost -Fans: 5 x 400 mm -Dimensions: 4200 x 800 x 600 mm -Volume: 44 L -Weight: 310 kg -Quantity in stock: 9 -Reference number: CH 598 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Year of construction: 2018, condition: used, Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 Hodpfoxpuv Aex Ap Hjnn -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: excellent (used), Evaporator Thermofin -Type: TEN071.1-F-2-7-HG -Cooling capacity: 52.1 kW at DT8, 39.3 kW at DT7 -Surface: 315 m2 -Air flow: 28 290 m3/h -Fin spinning: 7 mm Hjdevw Nqbopfx Ap Henn -Fans: 2 x 710 mm -Dimensions: 3450 x 1000 x 1120 mm -Volume: 86.66 L -Weight: 460 kg -Quantity in stock: 5 -Reference number: CH 533 -Condition: Used