Used Ingersoll Jig for sale (227)

Condition: used, functionality: fully functional, Rotary Air Compressor, INGERSOLL RAND, Model C70018M3, capacity 1,916 ACFM, maximum pressure 90 PSI at 3,575 RPM, Serial No. C14064; equipped with a US MOTOR electric motor, Model 6315-J/C3, rated at 350 HP, 2,300 V, 3-phase, 80 A./Compresor rotativo, Marca INGERSOLL RAND, Modelo C70018M3, Cap. 1916 ACFM, Presión max. 90 PCI a 3575 rpm, Serie C14064; con motor maca US MOTOR, modelo 6315-J/C3, de 350 hp, voltaje 2300 a 3ph, 80 amps. Psdpszmn Rnefx Aqljpw

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper Pjdportrx Refx Aqljpw (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: used, power: 26 kW (35.35 HP), fuel type: diesel, color: other, fuel: diesel, Year of construction: 2006, operating hours: 1,230 h, Technical information Number of cylinders: 3 Drivetrain Drive: Walking Engine type: Yanmar 3IRH8N Fuel tank: 50 litres Measures and weights Empty weight: 650 kg Dimensions (LxBxH): 336 x 139 x 124 cm Functional Capacity: 186 m³/h Supply voltage: 12 V CE mark: yes Condition Psdszp Hklepfx Aqlepw General condition: average Technical condition: good Visual appearance: average Working pressure – 7 bar (psi)

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm Ppsdpfx Aovwgmgeqlew z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. Ppedonp Iywjpfx Aqlew good working condition

Condition: used, Year of construction: 2007, operating hours: 5,950 h, MAKE: INGERSOLL RAND TYPE: 12/235 YEAR: 2007 CE MARKED: YES OPERATING HOURS: 5950 HOURS TIRES/UNDERCARRRIAGE: 80% POWER: 225KW ENGINE: YANMAR 6IRQ9A WEIGHT: 5125 KG OPTIONS: NEW COMPLETE FILTER SET: €2500 12 BAR WORKING PRESSURE 23 M3/MIN 13 BAR MAXIMUM PRESSURE GOOD CONDITION, READY FOR IMMEDIATE USE KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS Ppsdpjzlv Niofx Aqljw VAT ID: NL864089764B01

Condition: used, Year of construction: 1999, Diesinking / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 300 mm table size X: 550 mm table size Y: 470 mm max. workpiece size X: 700 mm max. workpiece size Y: 500 mm max. workpiece size Z: 250 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg Ppodpfx Aqszguidoljw electrode changer: 20 - time generator: 50 Ampere drop tank Control CNC control: Mitsubishi 32-bit EDM control

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor Podpfx Aqou Ic Rysljpw 225 Kw Year 2012

Condition: good (used), Year of construction: 2008, Ingersoll Rand screw compressor 110 Kw Ppedpfou Idnajx Aqljw Year 2008

Condition: excellent (used), Year of construction: 2011, operating hours: 1,703 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, tank capacity: 800 l, OPS INGERSOLL Gantry Eagle 800 year of manufacture: 2011 travel: x, y, z 550 x 850 x 450 mm control: Eagle Power Tec electrode changer: 20 pieces 3D probe 3D probe on the table magnet: 400 x 200 mm C-axis Ppjdpfx Aezgt Rmsqlew EROWA clamping system fire extinguishing system remote control chiller includes approximately 600/700 liters of dielectric fluid includes drawer cabinet with contents documentation machine is powered on for inspection

Year of construction: 2000, condition: used, Second-hand compressor Year of manufacture: 2000 Technical specifications to follow Availability: at short notice Ppjdpfx Aqjzk N Rwjljw Storage location: Röllbach

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low operating hours (1540 hours of erosion time) Ppedpfxezkftbe Aqlsw EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system Cooling unit

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Year of manufacture: 2017. Ppodpfx Aqex Htfyjlew Inspection under power possible.

Year of construction: 2003, condition: good (used), EDM machine Machine type: OPS Ingersoll Gantry 5000 Year: 2003 Ppodpfxezi Sfue Aqljw SPECIFICATIONS Travel

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: Ingersoll OPS 550 Control: Andronic 2060 Year: 2008 SPECIFICATIONS Travel X-Axis: 550 mm Y-Axis: 400 mm Z-Axis: 400 mm Rapid motion: (X/Y/Z): 60 m/min. Panning head Max. revolution: 0 - 42.000 rpm Spindle power: 15 / 17 kW Tool: HSK 40 E Tool capacity: 32 Table size: 650 x 500 mm Max. Table Load: 500 kg Req. space (LxBxH): 2,58 x 1,9 x 2,26 m Machine weight: 7.200 kg Ppodpfsziy Dxjx Aqlew Equipment Caliper Electronical handwheel Erowa Nullpunktspannsystem

Year of construction: 2009, condition: used, Ingersoll Rand TS1100W Air Dryer Manufacturer Ingersoll Rand (manufactured by Parker Hiross S.p.A, Italy) Type Refrigeration air dryer – industrial version Industrial applications • Air treatment for compressed air in pneumatic systems • Industrial applications requiring dry air: machining, painting, automation, etc. • Protection of equipment sensitive to humidity Main technical specifications: • Model: TS1100W • Serial number: 3733790002 • Cooling: water-cooled • Refrigerant: R407C • Maximum low-side pressure: 1.9 MPa (275 psi) • Maximum high-side pressure: 2.8 MPa (406 psi) • Circuit pressure: 2.6 MPa (378 psi) • Minimum/maximum air pressure: 4 bar / 14.5 bar • Maximum air temperature: 60°C • Ambient temperature: 5°C to 50°C • Power supply: 400 V – 3 Ph – 50 Hz • Power consumption: 15.6 kW / 27.8 A • Protection level: IP44 • Oil carryover: ≤ 0.01 mg/m³ (with suitable pre-filtration) • Approximate dimensions: 1,450 mm width • Approximate weight: ca. 650 kg • Year of manufacture: February 2009 🧩 Machine usage The Ingersoll Rand TS1100W industrial air dryer is designed to remove moisture from compressed air in production facilities. It protects pneumatic lines, automated equipment, and processes sensitive to humidity, ensuring the reliability and longevity of machinery. Ppedpfoxggmnex Aqljw ⚙️ Features / Distinctions The TS1100W is distinguished by its water cooling, ideal for industrial environments with high thermal loads. It supports high operating pressures (up to 14.5 bar), and its R407C refrigerant meets modern environmental standards. The robust design allows for heavy-duty, continuous operation.

Condition: excellent (used), Year of construction: 2005, MANUFACTURER: INGERSOLL RAND MODEL: NIRVANA N75 Psdpfx Aqsyk Uniolspw SERIAL NO.: 2770893 YEAR: 2005 POWER (kW): 75 CAPACITY (m3/min): 12.5 PRESSURE (bar): 10 HOURS (DOC/TOTAL): FREQUENCY INVERTER: yes BUILT-IN DRYER: no HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Ppjdpfxowric Ee Aqlow

Year of construction: 2008, condition: ready for operation (used), A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible. Ppodpfszh Nhwex Aqlow

Condition: used, Year of construction: 2008, functionality: fully functional, 1. Wire EDM machine, OPS INGERSOLL Gantry Eagle 800, with IMC5 handling system, year of manufacture 2008. In very good condition and in operation until December 2025. Ppjdpfx Aqsy Ifu Nelow Now dismantled. Includes 1 cooling unit, M.T.A TAE EVO M10 (year of manufacture 2012). 1 fire extinguishing system, Kraft & Bauer FB703. Weight approx. 6,700 kg. Available for sale at a favorable price. Price significantly reduced!

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control system: Mitsubishi - 64-bit CNC Generator power: 70 Amps - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up disc changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the machine mentioned above: Replacement of the ball screw drive and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screw drives of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to the OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt wipers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and the control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. Ppedpfx Aqjzgckvelsw The machine is immediately ready for use and is ideally suited for reliable production operation.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK32 - Spindle power : 17 [kW] - Spindle speeds : 30-42000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 550/400/400 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS - Travel : 120 [°] (+/-) - Indexing precision : 0.0001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 32 TABLE - Table dimensions : 450 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1900X2580 [mm] - Machine height : 2260 [mm] - Machine weight : 7200 [kg] MACHINE HOURS - Number of hours under power : 12558 [h] - Number of working hours : 6602 [h] Podpfsuhbtkex Aqljpw EQUIPMENT - CNC : INGERSOLL ANDRONIC - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - 3 colors status lamp - Micro-lubrification coolant - Spindle cooling unit - Tool probe : BLUM

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Travel paths X/Y/Z: 1000/1510/700 mm C-axis 30-way electrode changer Pedjzfx S Hopfx Aqljpw Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

Condition: excellent (used), Year of construction: 2010, operating hours: 50,000 h, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 40,000 rpm, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel distances (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Main voltage: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Model: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 👉 Integrated dust/smoke extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in toolmaking 🧩 Features CNC control with operator panel 3-axis machining Compact and robust design Complete system including extraction unit Made in Germany 📦 Condition Machine in ongoing production Fully functional Well maintained Inspection under power possible Pedpfsyxyz Sjx Aqlepw 🚛 Delivery Available at short notice Free loading onto truck 📌 Applications Mold making Electrode manufacturing Precision machining 📞 Note Further images, videos, and technical details available on request. Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, Ingersoll Rand D480IN-A Refrigerated air dryer Ppsdpork Rp Esfx Aqlsw 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph