Used Ipetronik Iso Voltage Devider for sale (15,145)

Condition: used, 2 units available Nodpowm Imxefx Ac Dslh See also my other offers in the field of automotive measurement technology Bandwidth up to 100 kHz Reliable voltage measurement in DC high-voltage systems Galvanically isolated high-voltage divider For applications in electric and hybrid vehicles Direct connection to SENS modules Approved application areas according to CAT I and CAT II

Condition: new, IPETRONIK Type: Interior Climate Simulation Box Technical data and description of the system: IPETRONIK Interior Climate Simulation Box (new and unused) Nlodpfszd Ukpox Ac Deh The interior climate simulation box is designed to simulate the passenger compartment for testing in a recirculated air mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and fed into the interior. The interior climate simulation box is used to test only rear evaporators installed in the passenger compartment. The insulating housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulating chamber: Dimensions: External: Width 1,860 mm Depth 2,360 mm Height 1,360 mm Internal: Width 1,700 mm Depth 2,200 mm Height 1,200 mm Insulation: 80 mm polyurethane rigid foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with embedded eccentric locking catches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM diamond pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with the wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N/rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, leading downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heater tapes silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, heated viewing window, 500 x 500 mm, 3-pane glazed, surface heating (230 V), frame heating (230 V), heating controlled externally, silicone-free edging Sliding wall: 1680 x 1180 mm, 80 mm polyurethane rigid foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective film, closed with sheet metal on the reverse side (The rear wall can be adjusted manually and continuously to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is conveyed via a radial duct fan (Cosmo); heating is provided by an electric heater (Türk und Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk und Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC system: S7 300 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Year of construction: 2007, condition: good (used), ISO ALPHA 500 – Danish trolley stacking and destacking machine Efficient and user-friendly machine for the automatic assembly and emptying of Danish trolleys. Ideal for companies looking to optimize their logistics processes and reduce labor costs. The machine is equipped with a base destacker. An operator simply places the four posts into the trolley, after which the trolleys are automatically assembled and filled with the desired number of shelves. The ISO ALPHA 500 can also be used for dismantling trolleys. The shelves are removed from the trolleys fully automatically, ensuring fast and ergonomic processing. Key features: Fully automatic filling of Danish trolleys Adjustable number of shelves per trolley Includes base destacker Also suitable for automatic emptying of trolleys Efficient and labor-saving The price has recently been significantly reduced. The machine must be dismantled by the buyer. Location: Bleiswijk. A versatile solution for both assembling and dismantling Danish trolleys. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Nlsdpfx Acoz Rcfms Djh Duijndam Machines The specialist in used agriculture and horticulture machinery

Year of construction: 2006, condition: like new (used), Zum Verkauf steht ein hochwertiger Posten pneumatischer Industrie-Zylinder des Herstellers SMC. Gesamtmenge: 5 Stück Serie: C92 (ISO-Standardzylinder) – robuste Heavy-Duty Ausführung – geeignet für höhere Kräfte und industrielle Anwendungen – standardisierte Bauform (ISO), universell einsetzbar – kompatibel mit gängigen Ersatzteilen und Dichtungen Die Zylinder stammen aus industrieller Anwendung und wurden fachgerecht demontiert. Optischer Zustand gut, mechanisch intakt wirkend. Eine vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Industrieautomation – Maschinenbau – Produktionsanlagen – Wartung und Ersatzteilversorgung ISO-Standardzylinder der SMC C92 Serie sind weit verbreitet und langfristig verfügbar. Neupreis vergleichbarer Einheiten: ca. 250–450 € pro Stück. Sehr interessanter Posten für Industrie oder Handel. Verkauf vorzugsweise komplett als Set. Preis: 790 € VB Standort: Slowakei (EU) Versand europaweit möglich 🇬🇧 PREMIUM VERSION For sale: high-quality lot of pneumatic industrial cylinders by SMC Total quantity: 5 units Series: C92 (ISO standard cylinders) – heavy-duty industrial design – suitable for higher force applications – standardized ISO construction (universal compatibility) – spare parts and seals readily available The cylinders originate from industrial application and were professionally dismantled. Good visual condition, mechanically appear intact. Full functional testing has not been performed. Suitable for: – industrial automation – machinery – production lines – maintenance and spare parts SMC C92 ISO cylinders are widely used and remain standard in industrial systems. Estimated new price: approx. 250–450 € per unit. Very attractive lot for industrial users or resellers. Preferably sold as a complete set. Nlsdpfsy Nf Dmjx Ac Doh Price: 790 € negotiable Location: Slovakia (EU) Worldwide shipping available

Condition: used, Year of construction: 2018, Overview This complete can filling line was manufactured by COMAC and is designed for the filling of carbonated beer in aluminium cans. The line has a nominal output of 5,500 cans/hour for 44 cl cans and 6,000 cans/hour for 33 cl cans. The core machine is a COMAC ISO 14-2 filling and seaming monoblock with 14 electro-pneumatic isobaric filling valves and 2 seaming heads. The filling monoblock includes CO₂ flushing before filling, product tank pressure control, “no can – no fill” function, automatic height adjustment for different can sizes and CIP dummy cans suitable for acid and caustic cleaning up to 80°C. The self-adhesive labeller handles a maximum label length of 210 mm and a maximum label height of 80 / 160 mm at up to 6,500 cans/hour. The dry rinsing system uses approx. 0.25 Nl of ionized air per can, with a treatment time of approx. 3 seconds. Technical data - Line type: Complete can filling line - Manufacturer: COMAC - Year of manufacture: 2018 - Product: Carbonated beer - Nominal output: 6,000 cans/hour (33 cl); 5,500 cans/hour (44 cl) - Filling temperature: 2–4°C - CO₂ content: max. 5.5 g/L - Container type: Two-piece cans with SOT - Can formats: 330 ml and 440 ml - Can diameter: 66 mm - Can end: 202 - Product pressure: 3–4 bar - Water pressure: 3–4 bar - Air pressure: 6 bar - CO₂ pressure: 6–8 bar - Electrical supply: 3x400 V + N + T, 50/60 Hz - Auxiliary voltage: 24 V Scope of Delivery - Can Depalletizer | COMAC | For pallet size 1,120 x 1,300 mm; incl. empty can buffer table and platform | 2018 - Dual Channel Can Rinser | COMAC | Ionized Air Rinser | HEPA filtration, ionized air cleaning, 2-channel design | 2018 - Self-Adhesive Labeller | COMAC | Wrap-around labelling for empty cans; 6-plate carousel | 2018 - Filling / Seaming Monoblock | COMAC | ISO 14-2 | 14 isobaric filling valves / 2 seaming heads | 2019 - Double Shower | COMAC | Washing device after level control | 2018 - Beer Pump | COMAC | Centrifugal beer pump with frequency converter and pressure control | 2018 - Level / Lid Inspection | FT System | HS600-ST+CL003-RX+CT001-SE+ZT | X-ray level control / inspection system | 2019 - Can Twister 1 | COMAC | 180° can inversion before coding | 2018 - Can Dryer | BRB Globus | MEGA ADE 611 CW | 2019 - Ink Jet Coder | COMAC | Continuous inkjet coder, up to 162.5 m/min | 2018 - Can Twister 2 | COMAC | Return cans to upright position | 2018 - Carton closing system | SOCO System | T-10 | 2012 - Can / Case Conveyor System | COMAC | Conveyor system according to layout | 2018 - Conveyor Canopy | COMAC | Stainless steel canopy above empty can conveyors | 2018 - Change Parts | COMAC | – | Format parts for 33 cl cans and 44 cl cans incl. spouts, twisters and labeller parts | 2018 - Technical Documentation | COMAC | Documentation in English, paper copy and CD-ROM | 2018 Condition Used line – built in 2018, currently still installed. The line can be viewed on request. Njdozktw Uopfx Ac Dolh Availability Immediately available. Location: United Kingdom.

Year of construction: 2022, operating hours: 39 h, condition: like new (used), functionality: fully functional, machine/vehicle number: IPRTTJ22Z144, ISOblow Prof Twin Turbo – Mobile unit including complete hose set, lance set, and woven sack for blowing in - 2 turbines generate a very high air flow rate Nodjz R Ut Ropfx Ac Dslh - Also ideal for wood fiber insulation materials - Electronically controlled material slide - Easy filling via large filling flap - High capacity of the hopper - Material hopper with 4 loosening shafts - Very good loosening, even with tightly compressed bales - Ideal for large construction sites and use in prefabrication - 1 x 400 V 16 A connection is sufficient

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: AC, input voltage: 400 V, year of last overhaul: 2025, input frequency: 50 Hz, Equipment: documentation/manual, Manufactured by Eurostar Italy - one of the leading filling manufacturers Designed for filling Apple Cider, Beer, CSD and still drinks Triblock -rinser - filler - capper 2,000 BPH at 500ml bottles 3,000 BPH at 330ml bottles Isobaric Counterpressure Filling, designed for cider, beer, and other still & sparkling beverages Double Pre-Evacuation with Vacuum Pump, ensuring minimal oxygen pickup for superior product quality 316 Stainless Steel contact parts for superior hygiene and durability Pneumatic Bottle Lifters - overhauled 2025 Twin-channel rinser with final blow-off - overhauled 2025 Crown Cap (26mm caps) Capper Bypass - to feed to other cappers Nljdpfx Asx A U Ursc Deh Touch Screen Control Panel for easy operation and monitoring Siemens PLC System, providing precise process automation and flexibility Variable speed control via inverter drive CIP Cups, Cleaning fluid can be recycled Change Parts Included for 250ml, 330ml, 500ml, and 750ml glass bottles Heavy-duty stainless steel frame CE-compliant safety Includes all manuals Spare Parts package Spare Fill tubes - new for adaptation to any bottle fill height Spare filling valve seals etc. Can be loaded to buyer's transport

Condition: used, functionality: fully functional, USED UNIVERSAL MILLING MACHINE WITH 200 MM SPINDLE, NOT 'CE', ISO 50, STANITALIANA. Weight 4000 kg Nsdpszhkvcofx Ac Dslh

Condition: good (used), Year of construction: 2000, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 20FT ISO CRYOGENIC TANK CONTAINER Manufacturer: Air Liquide Italia S.r.l. ISO Code 6346: 22KW IMO Portable Tank IMO Type 7 Transport Instructions: T75 ADR RID Tank Code: R11.7BN ISO Code 6346: 22KW Max. working pressure: 8 bar Hydr. test pressure: 11.7 bar Design Temperature: min -196 °C Material (Inner & Outer Vessel): High-grade Stainless Steel (X5CrNiN1810 UNI 7500) Insulation: Vacuum Double Envelope (Excellent current vacuum: 0.052 mbar) Safety Valves: 2x Herose Relief Valves (Set at 8 Bar) (p. 1) Vaporizers: Included & complete with piping Last Inspection: June 9, 2026 (5-Year Periodic Inspection by Bureau Veritas) Next Inspection Due: 12-2028 CSC Validity: Until 12-2028 (p. 1) Nodozd Sauspfx Ac Dolh Approval/Regulations: IMDG, ADR, RID, CSC, US DOT (p. 1) = Further Information = Year of Construction: July 2000 Model Year: 2000 Usable Material: Gas Unladen Weight: 8,300 kg Payload: 25,700 kg GVW: 34,000 kg Technical Condition: good Optical Condition: good Please contact Arne Honingh for further information.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 Nlsdpfx Asq H H Rusc Djh | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 27878-01, type of input current: three-phase, input frequency: 50 Hz, input current: 2,900 A, ABB Limited low-voltage main switchgear / main distribution switchboard Year of manufacture: 2012 Type: Low-Voltage Main Switchgear / Main Distribution Switchboard Nameplate data: Supply: 415 V AC, 3-phase, 4-wire, 50 Hz Auxiliary circuit voltage: 240 V AC Main busbar rating: 2900 A Main busbar fault level: 50 kA for 1 second (nameplate). The site equipment card also states 55 kA for 1 second. Degree of protection: IP31 Conformity: BS EN 60439-1, BS EN 60947-1, 73/23/EEC, CE Main breakers: ABB SACE E2 air circuit breakers (ACB) Interconnection ACB to Section C busbars Withdrawable PDU outgoing modules Metering / instrumentation cubicles with digital meters Associated with Transformer 1C / PDU distribution. Some compartments are marked Danger 11 000 V (HV / transformer cable side). Manufacturer: ABB Limited, Hanover Place, Sunderland, England, SR4 6BY. Nodpfxozz I T Eo Ac Djlh Condition: used, installed in a plant room. Price on request. Nameplate and cubicle photos available.

Condition: used, maximum load weight: 10,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2015, loading space length: 7,158 mm, loading space width: 2,505 mm, loading space height: 2,250 mm, total length: 9,910 mm, total width: 2,600 mm, total height: 3,665 mm, Equipment: ABS, SCHMITZ CARGOBULL ZKO 18/L – REFRIGERATED/ISO SEMI-TRAILER – AIR SUSPENSION – LBW 2.5 T ----VEHICLE HISTORY * German vehicle * Video of the vehicle available upon request (interior & exterior views) ----Schmitz Cargobull Refrigerated Semi-Trailer / Through-Loader General* Manufacturer: Schmitz Cargobull * Type: ZKO 18/L FP 45 COOL DL * Vehicle type: Refrigerated semi-trailer / Through-loader Internal dimensions* Length: 7,158 mm * Width: 2,505 mm * Height: 2,250 mm Chassis* 2 axles * Schmitz axles * Air suspension * Disc brakes * WABCO braking system Tires* 385/65 R22.5 Tail lift* PALFINGER MBB C2500 * Year of manufacture: 2015 * Serial number: 83518569 Equipment * Through-loader * Reversing camera * WABCO parking sensors * Work light * Side marker lights * 2x storage boxes * ASW Weights* Permissible total weight: 18,000 kg * Axle load 1: 9,000 kg * Axle load 2: 9,000 kg Other* WAP Fahrzeugtechnik ----EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES AND 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 Njdpfszt Ubyox Ac Djlh VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least 500.00 / 1,000.00 is required. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are made exclusively according to our general terms and conditions – see website Important note – Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, functionality: fully functional, USED VERTICAL MILLING MACHINE LAGUN ISO 40 WITH UNIVERSAL HEAD. ALSO COMES WITH THE UNIVERSAL HEAD ACCESSORY 'HURON TYPE.' Table dimensions 1370x280 mm T-slots No. 3 X-axis travel 850 mm Y-axis travel 350 mm Z-axis travel 400 mm Saddle travel 570 mm Nlodpezht N Sjfx Ac Djh Spindle taper ISO 40 Quill travel 127 mm Quill diameter 86 mm Spindle speed 60-4200 RPM Head tilt left-right 90 degrees Head tilt forward-back 45 degrees Main motor 4 Hp Maximum table load 250 Kg Approximate net weight 1650 Kg

Condition: used, Sporer PCS Aqua Jumbo Iso parts washer or automatic parts cleaning machine for the automatic cleaning and degreasing of workpieces using a heated, aqueous cleaning medium via a spray process. The machine operates as a top-loading unit with a rotating wash basket and is suitable for large and heavy components in workshops, maintenance departments and industry. The Iso version features thermal insulation to reduce energy loss. The pumps are leaking and need to be overhauled or replaced. Nodpfjzry Dwjx Ac Delh Technical data: - Basket diameter: 1,100 mm - Usable height: 500 mm - Load capacity: max. 350 kg - Tank capacity: 250 l - Power: 15.4 kW - Operating temperature: max. 75 °C

Year of construction: 2018, condition: excellent (used), Type: Low Voltage Distribution Board / MCCB Panel Installed equipment 1 × Schneider Electric Compact NSX400NA main incomer Main incomer rating: 400 A 3-pole configuration Ui: 800 V Uimp: 8 kV 4 × Schneider Electric Compact NSX160F outgoing MCCBs 4 × Schneider TM125D thermal-magnetic trip units Outgoing MCCB rating: 125 A each Breaking capacity: approximately 36 kA at 415 V 1 × additional Schneider / Merlin Gerin outgoing device rated 125 A 1 × additional Schneider / Merlin Gerin outgoing device rated 63 A Nsdezlii Nopfx Ac Djlh Three-phase L1/L2/L3 distribution Internal busbar system Labelled outgoing circuits Spare internal capacity / blanked positions Heavy-duty floor-standing steel enclosure Lockable double front doors The board appears complete and is in good visual condition. Operational testing and final electrical inspection should be carried out by the purchaser before installation. Available for inspection. Additional photographs and technical information can be provided.

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy ISO 20FT Tank Container 23,820L / 1-Compartment UN PORTABLE T11 Bottom discharge Steam heating Nledpfxozap R Rs Ac Doh 5-Year + CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable materials: Chemicals, construction water, fuel, waste water, and sewage Weights Tare weight: 3,820 kg Payload: 24,930 kg Gross vehicle weight: 36,000 kg Functional Interior capacity: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further Information Please contact Arne Honingh for further details.

Year of construction: 2021, operating hours: 1,800 h, condition: used, functionality: fully functional, clamping diameter: 200 mm, laser power: 3,000 W, machine/vehicle number: WS-13.04.2021-31-F, laser source manufacturer: Raycus, We offer this used Weni Solution WS6020TL tube laser, manufactured in 2021. Brand: Weni Solution Model: WS6020TL Laser power: 3000 W Working area: 6000 × 200 mm Nlsdszdza Repfx Ac Dsh Year of manufacture: 2021 Input voltage: 400 V/50 Hz ±5% Weight: 3000 kg Power consumption: 27 kVA Matching extraction system also available. Inspection and functional testing before purchase are highly recommended (dismantling on 07/06/2026). Sale exclusively to businesses, excluding any warranty, guarantee, right of return, or conversion, to the extent permitted by law. The machine is sold in its current condition (“as inspected” or “as is”). Information on technical data, condition, operating hours, accessories, and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations, and official requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer’s warranties, or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, mileage: 1,262,000 km, first registration: 12/2009, fuel type: diesel, empty load weight: 9,870 kg, maximum load weight: 8,130 kg, overall weight: 18,000 kg, tire condition: 50 %, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 250 l, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,060 mm, total width: 2,600 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, loading space length: 6,600 mm, loading space width: 2,430 mm, loading space height: 2,600 mm, Year of construction: 2009, Equipment: ABS, air conditioning, cooling unit, electric window regulation, fog lights, parking heater, tail-lift, truck registration, Iveco Stralis 190S31 ISO-Therm box body (internal dimensions: 6.60m long / 2.43m wide / 2.60m high) with Mitsubishi 0°C refrigeration unit and 2,000 kg tail lift 4x2 front leaf suspension - rear air suspension automatic transmission GVWR 18,000 kg - payload 8,130 kg total truck length 9.06m wheelbase 4.80m Euro 5 tires 50% tread 250L tank spoiler auxiliary heater air conditioning sleeper cab with 1 bed Nljdjzai I Aspfx Ac Dsh sun visor fog lights air-suspended driver's seat electric windows and exterior mirrors ABS export net price 11,500.00 Euro all information without guarantee / subject to errors

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 107 h, load capacity: 1,500 kg, lifting height: 2,800 mm, fuel type: electric, mast type: telescopic, construction height: 1,900 mm, battery capacity: 110 Ah, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 1,020 kg, total height: 1,900 mm, total length: 1,800 mm, total width: 800 mm, fuel: electricity, JUNGHEINRICH EJC 216 ISO 2A 280ZT – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 2.800 mm Closed height: 1.900 mm Mast: Standard (2W280) Drive: Elektro 24V Battery: 25,6V/110 Ah (2019-Li-Ion) Charger: integr. Tyres: Bandagen Service weight: 1.020 kg Length: 1.800 mm Width: 800 mm Year of manufacture: 2019 Operating hours: 107 h Condition: working condition EQUIPMENT Pulse control Internal no.: 1308497 Nljdpfxoz R T Nwj Ac Dsh Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2012, condition: used, Year of manufacture: 2012 New: No Nsdjydmzuspfx Ac Djlh Attachment suited for: Loading and unloading machines Please contact Sales Team for more information

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2007, total length: 14,040 mm, total width: 2,600 mm, suspension: air, wheelbase: 8,980 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Steering Axle = More information = General information Year of construction: 2007 Registration number: OJ-39-SV Axle configuration Make axles: BPW Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg; Steering Nlsdpfx Ao Ady N Uoc Deh Weights Empty weight: 9.700 kg Carrying capacity: 32.300 kg GVW: 42.000 kg Maintenance APK (MOT): tested until 03/2027

Condition: used, machine/vehicle number: LC674, Used MEC ISO DPS 12-12-1C bottling line - 2600 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling in 0.33L and 0.5L formats. The line combines filling, carbonation, sterile filtration, CIP cleaning, labeling, date coding and rotary bottle handling equipment for beverage production and industrial packaging applications.Container type: Glass bottlesCompatible formats: 0.33L and 0.5L bottlesFiller: Eurostar ISO DPS 12/12/C counter-pressure filler, 2,600 bphSTS labeling machine: S2T3/R1 front, back and neck labeling with date stamping, 2,500 bphCanellitech wraparound labeling machine: 3,000 bphCondition: Fully refurished in 2022. Filtration: 5 micron, 1 micron and 0.45-micron sterile filtration stagesCIP system: 2 x 350L tanksAdvanced Automation & Control SystemsThe line includes dedicated date-coding equipment, combining the STS integrated date stamp with a separate Overprint inkjet date stamp. This arrangement supports product identification and coding requirements within a glass bottle bottling process. The Carbotech 1000 carbonator is equipped with an upgraded variable overpressure pump to support controlled carbonation operations.The listed CIP, filtration and product-preparation equipment provide key process support for beverage production. Machines of this type are normally coordinated with bottle handling and packaging machinery to maintain a consistent production flow.Production Line Integration CapabilitiesThis complete bottling line is designed around counter-pressure filling of glass bottles and can be integrated with upstream product preparation and downstream industrial packaging equipment. Rotary loading and offloading tables support bottle transfer around the filling and labeling section. Full change parts are included for 0.33L and 0.5L bottle formats, supporting format changes between the stated bottle sizes.Machine typeManufacturer / modelYearVarious EquipmentITPL Filtration System2022Various Equipment6 PD CIP System2022Filling MachineEurostar ISO DPS 12/12/C2006SaturatorCarbotech 10002021Labeling MachineSTS S2T3/R12015 Nlsdpfx Asz E Dizec Deh

Year of construction: 2012, condition: used, Year of manufacture: 2012 New: No Attachment suited for: Loading and unloading machines Please contact Sales Team for more information Nodpoydmzzofx Ac Dslh

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 430 mm, feed length Y-axis: 410 mm, feed length Z-axis: 360 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, total height: 2,000 mm, total width: 1,475 mm, total length: 1,700 mm, table width: 320 mm, table length: 800 mm, overall weight: 1,650 kg, Universal Milling Machine FNF 32. Year of production: 1995 (FOP AVIA Poland) Specifications: Nledpfx Acexnynbj Dsh Horizontal worktable: 320 x 800 mm. Vertical worktable: 320 x 900 mm. Spindle taper: ISO 40. Swiveling head: +60; 0; -60 degrees. Hydraulic tool clamping. Travel: X – 430 mm, Y – 410 mm, Z – 360 mm, Spindle speed "1": 50–315 rpm, Spindle speed "2": 400–2500 rpm, Main motor power: 4 kW. Power requirement: 5 kW. Dimensions (L x W x H): 1700 x 1475 x 2000 mm. Weight: 1650 kg.

Condition: used, ISO 40 collets, various clamping devices, cutting inserts Nlodpezx Eqvjfx Ac Doh two cabinets