Used Itv Schneidmühle for sale (36)

Condition: used, machine/vehicle number: 11056, 3-blade rotor Pgsdoyr Tihspfx Ag Dok 2 rows of stator blades Rotor diameter: 350 mm Working width: 600 mm Inlet cross-section: approx. 600 x 450 mm Machine with noise protection box

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm Pgjdoyyxm Nepfx Ag Djk

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. Psdpfx Ajyxr T Tsg Dsgk The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Tilting Spindle Moulder KÖLLE F45 with power feed and integral fence Very good condition; the machine comes from a small model making workshop and has only seen light use. Everything works perfectly. All bearings and guides are in proper condition; the machine runs extremely smoothly. Year of manufacture: 1992 The moulder fence features one adjustable jaw with fine adjustment and scale, enabling jointing operations such as for gluing profiles. The entire fence can also be accurately and quickly adjusted in depth via a handwheel and leadscrew, with the milling depth displayed digitally. Spindle locking by lever. The machine is equipped with an eye-level control panel. Fitted with AIGNER integral fence. Pgodpfx Aey Hxtpog Dsk Efficient chip extraction with two extraction ports (125 mm and 100 mm). Equipped with a 30 mm spindle, continuously tiltable from -5 to 45°, tilting is electrically operated; for fine adjustment, there is a handwheel and digital readout. A 40 mm spindle can also be installed. Reverse/forward rotation capability. Nationwide personal delivery and demonstration within Germany for €220, eliminating all risk on purchase. Shipping to Austria and other EU countries available on request. Large table opening, adjustable by multiple insert rings (enabling use of both large and small diameter cutters with optimal safety). Spindle speeds: 3000, 4000, 5000, 6000, 8000, and 10,000 rpm. Spindle height adjustment is also electric, with fine adjustment via handwheel and digital readout. Includes 2200 mm long extendable auxiliary support. Very robust and durable construction, built for heavy-duty milling tasks and suitable for all routing operations. Optimal power transmission via belt drive system. Supplied with operating manual. Includes 4-roller HAFFNER power feed, model 904. The feed unit features forward/reverse operation and 4 speeds, with individually mounted feed rollers. Machine table is 1200 mm wide and 1000 mm deep, with 500 mm table extensions on both left and right sides. Ready to use immediately. 380V, 6000 and 8600W motor thanks to two speed ranges; fitted with a heavy-duty motor. Comes with all necessary safety features, including motor brake and emergency stop. The machine is certified by the Woodworkers' Professional Association and carries the GS tested safety mark. Weight: approx. 1000 kg Fitted with motor overload protection. Professional-grade machine, not DIY store quality. Optimal, simple, fast, and safe handling.

Condition: used, mileage: 273,192 km, power: 368 kW (500.34 HP), first registration: 02/2023, fuel type: diesel, empty load weight: 9,243 kg, maximum load weight: 17,757 kg, overall weight: 27,000 kg, tire size: 385 / 65 R 22,5, next inspection (TÜV): 12/2026, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, Year of construction: 2023, front tire size: 315 / 70 R 22,5, rear tire size: 315 / 70 R 22,5, Equipment: air conditioning, navigation system, parking heater, spoiler, Stationary air conditioning, work lights, electrically adjustable and heated exterior mirrors, hands-free car phone system for mobile phones, air-suspended passenger seat, ventilated seats for driver and passenger, roof hatch, tachometer, electric windows left and right, air-suspended driver’s seat, air/air suspension, 12 gears, low noise, automatic transmission, lift and lower function, climate control: automatic climate control plus stationary air conditioning, refrigerator, leather steering wheel, air horns, multifunction steering wheel, navigation system, fog lights, entertainment: navigation device with display, sleeper cab, 2 sleeping berths, heated seats for driver and passenger, sun visor, spoiler package, standard auxiliary heater, fuel tank capacity 460 + 265, safety package with adaptive cruise control, emergency brake assist, and lane assist, additional retarder brake, Euro 6 engine, LED rear lights, LED headlights, adaptive cruise control, large display, air-suspended cab, length-adjustable fifth wheel, power take-off. Pjdpfsx Hkpvox Ag Dsgk

Year of construction: 2026, condition: new, functionality: fully functional, Barbaric pillar jib crane with vacuum lifter - Boom length: 6 m - Overall height: 4.3 m - Load capacity: 250 kg - Comfort control, all functions on the operating handle, lifting/lowering, tilting, suction/releasing - Tiltable by 90° - Lifting speed 0-10 m/min continuously adjustable - Chain length: 3.5 m - 230V, 3x1.5 mm² - Operating pressure 6 bar, filtered, dry compressed air required Podpfx Aevy Trnog Dsgk - Safety system - Reinforced traverse: Reinforced version for slightly permeable and slightly structured panels Further details on request. Exhibition machine, can be viewed by appointment.

Condition: used, mileage: 68,300 km, power: 96 kW (130.52 HP), first registration: 03/2019, fuel type: diesel, wheelbase: 3,750 mm, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,400 mm, loading space height: 1,900 mm, Year of construction: 2019, - Used Commercial Vehicle: Ford Transit 310 Van L3 H2 Trend. - Year: 2019, Engine: 2.0 TDCi 130 HP Euro 6, 6-speed manual gearbox, Mileage: 68,300 km. - Van / Panel Van L3 H2, long wheelbase, Cargo area dimensions: 3,400 x h. 1,900 mm, Fully lined cargo area with full-height panelling. - Trend trim, equipped with: Air conditioning, Radio-Bluetooth with USB, Fog lights, Cruise control, Front and rear parking sensors, LED daytime running lights, On-board computer, Central locking, Two keys, Spare wheel, Driver airbag. - Bodywork and interior in excellent condition, Mechanics with 12-month warranty. - NEW Front and Rear Tyres. Inspection valid until March 2027. - One-owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d’Erba - Via Vallassina 6 - Tel. 031.699.049 - Contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d’Erba (Province of Como) Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:00 - Certified mileage. - Test drives available by appointment. - Ownership transfer handled on site. - Custom financing options available. Pgodpfx Asywi Raog Dok Carlo Mauri Srl declines any responsibility for possible inadvertent inconsistencies in this advertisement, which does not represent any contractual obligation. Prices shown are net of VAT and transfer of ownership fees.

Condition: used, mileage: 450,000 km, power: 294 kW (399.73 HP), first registration: 11/2011, fuel type: diesel, empty load weight: 12,010 kg, maximum load weight: 14,000 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 2,600 mm, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, with company building, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, front exhaust, automatic transmission, differential lock, fog lights, work lights, storage box, leaf-air suspension, trailer coupling with air and light connections, aluminum tank, low-noise G1, 2nd axle liftable, 2nd axle steered as front trailing axle, container locking system, rear supports, side aluminum underrun protection, roof hatch, green environmental badge. Wheelbase: 2600 mm. Superstructure: Meiller AK 16.T telescopic skip loader system. Transmission: ZF 12 AS 2130 DD TipMatic, wheelbase: 2600+1350, M cab, tank capacity: 450l. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Pgjdpfsy A Tckjx Ag Djk

Condition: used, mileage: 178,613 km, power: 118 kW (160.44 HP), first registration: 06/2010, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 04/2028, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, Internal vehicle number: G170470 German vehicle On our lot in Kaufungen - Kassel, available immediately More INFO at * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The auxiliary batteries need to be replaced. Psdpfx Agekkt Nys Dogk Channel inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 06 / 2010, registered as a self-propelled work machine, green license plate - Wheelbase: 4025 mm - Total weight: 4,600 kg - Engine power: 160 HP - Reinforced front axle (spring + damper) - Reinforced stabilizer front axle - Stabilizer rear axle under frame - Reinforced shock absorbers - Roof and rear wall doors high version - Additional hot-air heating - Yellow rotating beacon front left / rear right - Rear door, double-winged, 270 degrees - Mileage: approx. 178,613 km TV inspection system? RCA proline with Sat - RCA proline control unit - Cable drum ELKA 600 with approx. 380 m camera cable - Cable drum K15 sync. with approx. 120 m camera cable and 1 separate push cable with approx. 40 m - Pivoting crane with pulley for lowering camera/carriage - 1 carriage L 135 for main channels DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional halogen lighting, tilt measurement and deformation measurement - M-Series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Reversing camera with monitor for driver to position the vehicle with open rear doors - Water tank - Power supply via gel batteries Financing example: * Internal number: G170470 * Purchase price: 29,900.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € If the offer appeals to you or if you want to customize it according to your needs, contact us at Mr. Enchev). We look forward to your call Errors excepted We are happy to take your used vehicle in part exchange. Financing directly in our house is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, mileage: 68,300 km, power: 96 kW (130.52 HP), first registration: 03/2019, fuel type: diesel, wheelbase: 3,750 mm, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,400 mm, loading space height: 1,900 mm, Year of construction: 2019, - Used Commercial Vehicle: Ford Transit 310 Van L3 H2 Trend. - Year: 2019, Engine: 2.0 TDCi 130 HP Euro 6, 6-speed manual gearbox, Mileage: 68,300 km. - Van / Panel Van L3 H2, long wheelbase, Cargo area dimensions: 3,400 x h. 1,900 mm, Fully lined cargo area with full-height panelling. - Trend trim, equipped with: Air conditioning, Radio-Bluetooth with USB, Fog lights, Cruise control, Front and rear parking sensors, LED daytime running lights, On-board computer, Central locking, Two keys, Spare wheel, Driver airbag. - Bodywork and interior in excellent condition, Mechanics with 12-month warranty. - NEW Front and Rear Tyres. Inspection valid until March 2027. - One-owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d’Erba - Via Vallassina 6 - Tel. 031.699.049 - Pjdpfx Asyy Imxsg Djgk Contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d’Erba (Province of Como) Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:00 - Certified mileage. - Test drives available by appointment. - Ownership transfer handled on site. - Custom financing options available. Carlo Mauri Srl declines any responsibility for possible inadvertent inconsistencies in this advertisement, which does not represent any contractual obligation. Prices shown are net of VAT and transfer of ownership fees.

Condition: used, axle configuration: 2 axles, Year of construction: 2006, VAT/margin: VAT qualifying Pgodpfxeywii Ae Ag Dok

Condition: used, mileage: 100 km, power: 100 kW (135.96 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 6,200 mm, total width: 2,070 mm, total height: 2,480 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, General information Number of doors: 3 Year of manufacture: 2024 Technical information Number of cylinders: 4 Engine capacity: 2.299 cc Max. front axle load: 1850 kg Max. rear axle load: 2100 kg Weights Empty weight: 2.043 kg Carrying capacity: 1.457 kg GVW: 3.500 kg Maintenance APK (MOT): tested until 12/2027 Financial information VAT/margin: VAT qualifying = Additional options and accessories = - Airbag - Alarmsysteem class 1 - Beifahrerbank - Front center armrest - Immobiliser - LED lighting cargo area - Outside temperature display - Radio - Radio/USB/Aux - Reversing camera - Running board - Side-Bars - Side door - Tined glass - Two rear doors can be rotated 270° Pjdpfx Asyi Dvasg Djgk = Remarks = Loading space completely finished with sliding door to loading space + scaffolding.

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Year: 2010 Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket - hydraulic Volvo quick coupler - auxiliary hydraulic circuit up to the fork carrier - air conditioning - central lubrication Pgedpjyyy H Refx Ag Dok - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Also available with low-cost delivery!

Condition: new, axle configuration: 2 axles, total length: 5,250 mm, total width: 2,300 mm, total height: 1,000 mm, color: red, Year of construction: 2025, Carrying capacity: 24.000 kg Tyre size on axle 1: 24R20.5 Tyre size on axle 2: 24R20.5 Podpfxoytdpnj Ag Degk Tyre size on axle rear: 24R20.5

Condition: new, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 500 mm, loading space volume: 4 m³, Year of construction: 2025, Carrying capacity: 10.000 kg Pgjdpfx Aeytdpbeg Djk

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available Pjdpexnvq Eefx Ag Dsgk IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: used, mileage: 581,000 km, power: 308 kW (418.76 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 9,850 mm, total width: 2,550 mm, loading space length: 7,450 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, spoiler, Year of manufacture: 2018 Front axle: Steering; Tyre profile left: 25%; Tyre profile right: 25% Pgedpfxjymyk Is Ag Dsk Rear axle 1: Double wheels; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30% Engine capacity: 10.837 cc Empty weight: 11.270 kg Carrying capacity: 15.730 kg GVW: 27.000 kg Registration number: 27-BLJ-8 = Additional options and accessories = - Air horn - Air suspension - Alarmsystem - Camera system - Heavy duty engine brake - LED lighting cargo area - Line assist - Outside temperature display - Radio/CD player - Reversing camera - Roof spoiler - Sleeper cab - Vehicle heater

Condition: good (used), V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch -V-belt pulley: Roller V-belt pulley with variable pitch -Adjustment range: 17 - 35 mm -Hole: Ø 28 mm -Dimensions: Ø153 x 72 mm Pgedpfxjymb Emj Ag Dsk -Weight: 5.1 kg

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GHZ 600 Factory overhauled, V-rotor Feed width: 300 mm Maximum feed height: 70 mm Working width of rotor: 300 mm Rotor diameter: 252 mm Rotor speed: 600 rpm Cutting system: 14 knives, 40 x 40 mm Screen perforation: 25 mm Control cabinet: fully wired, incl. 5 m cable Motor output: 18.5 kW Electrical connection: 400 V +/- 5% / 50 Hz Extraction port Ø: 200 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: • PLC electrical control (Moeller / Siemens); star-delta starting • Load-dependent material feed via top-mounted feed roller • Machine frame on anti-vibration rubber mounts • Patented V-rotor with milled knife pockets in the profile • Welded knife carriers and bolted knives with recessed knife screws • Machine prepped for on-site extraction system (extraction port Ø 200 mm) Pedpfx Aoymb Ubog Dogk

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Podowc Sxdepfx Ag Degk Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: good (used), Year of construction: 2014, Vehicle description Mobile excavator TAKEUCHI TB295W Year of manufacture 2014 according to counter 9,709 hours 10,700 KG 77 KW - POWERTILT - hydraulic quick coupler - all lines Pgjdpfov D Dqvex Ag Djk - slope bucket - 2 buckets - blade - claws - central lubrication - air conditioning - reversing camera and and and... Nice and good original condition with original paint! Sale price: 49,950.00 net Cheap delivery also possible!

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV Pgedpfx Agogcw Rme Dek

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system Pgodpfx Ageyh S Aij Dsk according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, mileage: 549,593 km, power: 294 kW (399.73 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 12,050 kg, maximum load weight: 13,950 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,150 mm, next inspection (TÜV): 02/2024, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mtlg. House, 1x comfort seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, fog lights, work lights, rotating beacon, leaf/air suspension, 2-axle liftable, 2-axle self-steering, container lock, rear support, roof hatch, green environmental badge Wheelbase: 3150 mm Body: Hiab Multilift telescopic skip system. Engine: D2066LF58, Gearbox: 16 S 222 DD, Front axle 1: VOK-09-05, Rear axle 1: HY-135015, Cab: M, Brakes: MAN BRAKEMATIC-. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Pgodpfx Ajvhlx Asg Djk - .

Condition: reconditioned (used), functionality: fully functional, Max. forming area 960 x 660 mm Min. forming area 269 x 444 mm Max. sheet thickness (manual loading) 12 mm Max. sheet thickness (automatic loading) 10 mm Max. tool height 450 mm Year of manufacture 2000 Technical features of forming station UA 101 L: - Siemens control with swiveling operating panel - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Upper plunger system - Parallel clamping frame - Automatic window plate adjustment, lower frame - Automatic window plate adjustment, upper frame Pgodpfx Agewf Dtxs Dek - Vacuum for sub-table adjustable via cascade control - Pre-blow/demolding adjustable via cascade control - 4 cooling fans - Front opening with pneumatic interlock for tool change - Film sag control - Film pre-blow control - Vacuum preparation at the upper plunger - Tempering connection - Automatic tool change system, large setup - Vacuum pump Technical features of loader BE 101 L: - Upper and lower preheating - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Motorized, parallel lifting film transport - Film transport via pin chain - Film guidance with rollers - Automatic transport width adjustment - Motorized sheet lifter with automatic tool clamping - Mobile sheet loading trolley Options (price on request): - Pyrometer in upper heater for measuring temperature on film - Retrofit for roll material processing