Used Jager G - Dfs for sale (35,694)

Year of construction: 1970, condition: good (used), Technical Details : Wire range - 1- 7 mm Dedpfod Nm Abex Akmoku Capacity - 15 - 25 cross wire /min. Mesh width - 10 - 100 mm Working width - max. 2.200 mm Engine power - 4 kw

Year of construction: 2015, condition: ready for operation (used), total width: 2,200 mm, total height: 3,500 mm, product length (max.): 3,000 mm, BVL's Niagara DFS 800-2T was manufactured in 2015. It features a useful length of 800 mm and a carrying capacity of 150 kg. The machine includes two tanks, each with a volume of 1,100 L, and operates at temperatures between 45 °C and 60 °C. If you are looking to get high-quality cleaning capabilities, consider the BVL Niagara DFS 800-2T machine we have for sale. Contact us for further details. - Useful Length: 800 mm- Useful Width: 635 mm (Max dimensions on nameplate: 800 x 600 x 400 mm)- Useful Height: 100 mm- Charging Height: 950 mm- Carrying Capacity / Charge: 150 kg- Charges / Hour: Approx. 2-4- Tank 1 (Waschtank) Volume: 1,100 L- Tank 1 Heating Power: 36.0 kW- Tank 1 Pump Capacity: 22.5 kW- Tank 1 Pump Pressure: 4.5 bar (13.0 bar max on nameplate)- Tank 2 (Spültank 1) Volume: 1,100 L- Tank 2 Heating Power: 30.0 kW- Tank 2 Pump Capacity: 3.0 kW- Tank 2 Pump Pressure: 2.5 bar- Dryer Fan Power: 2.2 kW- Dryer Heating Power: 30.0 kW- Rotary Drive Power: 0.18 kW- Operating Temperature: 45 °C min / 60 °C max- Cleaning Liquid pH Range: 5.5 min / 11 max- Water Connection: G 3/4- Raw Water Hardness: < 2.5 mmol/l (< 14 °dH)- Raw Water Conductivity: > 250 µS/cm- Compressed Air: Min. 6 bar (according to ISO 8573-1:2010 [5:4:3])- Total Dimensions (W x D x H): 2,200 x 3,000 x 3,500 mm- Operating Voltage: 3 x 400 V / N / PE / 50 Hz / 200 A Dkjdez Ixwrepfx Akmeu

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Dkjdpfx Aksz I Ig Nomeu Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Year of construction: 2019, condition: excellent (used), 2-tank metalparts-cleaning machine usable length: 800 mm usable width: 600 mm usable hight: 400 mm loading capacity: 150 Kg. volume of washing-tank: 1.100 Ltr. Dkedpfx Aezndnlokmou volume of flush-tank: 1.100 Ltr.

Condition: excellent (used), Year of construction: 2016, Opportunity to buy this Universal Robot UR5 with G-loader to ensure automated loading and unloading of your cnc-machine. Including: UR5 robot, controller, touchscreen control unit, and connecting cables Software (GUI) Table with storage space for the controller and a mounting point for the touchscreen Product positioning system (incl. magazine for product carriers) Gripper (incl. valve) Air blow-off unit (inlc. valve) Compressed air treatment unit Signal tower Payload 5 kg Operating radius from rotation point 850 mm Orientation working range 720° Gripping force 10 to 200 N Gripper opening 0 to 84 mm Full technical specifications in the attached document. Immediately available for delivery. Dodpfxjz Niqaj Akmjku Can be seen in operation upon appointment in Belgium. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: L220G0109, turning length: 305 mm, turning diameter: 170 mm, spindle bore: 53 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 330 mm, total height: 1,800 mm, total length: 2,325 mm, total width: 1,600 mm, overall weight: 4,000 kg, bar passage: 45 mm, spindle nose: A2#5, Equipment: documentation/manual, DOOSAN DAEWOO Lynx 220 G CNC lathe - Rated power: 23.68 kVA - Max. load: 11.0 kW - Swing diameter over bed: 510 mm - Swing diameter over cross slide: 290 mm - Max. turning diameter: 170 mm (recommended) Dedpfx Asz I Ncxjkmeku - Max. turning diameter (technical): 320 mm - Travels: X-axis: 400 mm (160 + 15 mm) - Z-axis travel: 330 [550] mm - For further technical data, see the photographed machine specification - Includes documentation and accessories, including a two-jaw chuck, diameter: 165 mm, a tool holder, and a collet chuck 173E-42 B, max. speed: 6000 rpm FCA D-97711 Maßbach – loaded onto a truck.

Condition: used, Year of construction: 2019, machine/vehicle number: 9300000000083049, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 415 V, input current: 5 A, total width: 1,950 mm, total height: 2,480 mm, overall weight: 1,100 kg, fuel type: gas, We are offering this used Pavailler CRISTAL FM2 F/G rotary rack oven, manufactured in 2019. Type designation: Rack oven CRISTAL FM2 F/G Serial number: 930000083049 Date of manufacture: 07/2019 Category and gas pressure: I2L3P / 25 - 30 mbar Current: 5.8 A Gas certification number: 1312AU1466 Gas certification company: 1312 Net weight: 1100 kg Heating capacity: 77 kW Electrical power: 4 kW Flue gas outlet type: B23 Fuel: Natural gas Destination: Netherlands Voltage: 380-415 V Country of origin: France Suitable for baking trays of: 600x800 mm Dodpfx Aksz D Uxksmjku (WxDxH): 1950x2760x2480 mm Door opening (WxH): 800x1850 mm Price is exw Zwaagdijk NL Status: AS IS, no guarantees If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 1 x G. Mondini S.p.a. inline heat sealing machine fitted with ICE Zodiac thermal transfer overprinter. Supplied with User Manual, Electrical Diagrams, 4 x sets of tooling with arms for different sized punnets and 1 x tool trolley. Manufacturer – G. Mondini S.p.a. Model – SF 90. Serial number – 3713/09-1. Date of manufacture – 2009. Tooling set 1 - Infia K62, 4 x 1 format, Square punnet size - 163mm long x 163mm wide (approx). Tooling set 2 - Proseal SPL, 2 x 1 format, Tray size - 270mm long x 174mm wide (approx). Tooling set 3 - T1478X PS48213, 5 x 1 format, Tray size - 174mm long x 132mm wide (approx). Tooling set 4 - T1960U PS58822, 6 x 1 format, Tray size - 170mm long x 100mm wide (approx). Overall dimensions - 4220mm long x 900mm wide x 2150mm high. Dkedpfxsy Hl E Se Akmou Tooling trolley dimensions - 1300mm long x 750mm wide x 1750mm high.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 962157, type of input current: AC, input voltage: 230 V, overall weight: 3,500 kg, sheet thickness steel (max.): 150 mm, working length: 6,000 mm, protection type (IP code): IP21, cutting speed: 12,000 mm/min, table length: 6,000 mm, table width: 2,000 mm, working width: 2,000 mm, We offer a used plasma and oxy-fuel cutting machine, Varstroj VARCUT 3.2 L2/Ph - 2.5x6.0/1(PL+G). Serial number: 962157 Connection voltage: ~230 V Frequency: 50 Hz Connection power: max. 2.0 kVA Maximum cutting speed: 12000 mm/min Control: CNC Number of torches: 1+1 Cutting thickness (oxy-fuel): 150 mm Working width: 2000 mm Working length: 6000 mm Cutting gas: Propane butane, air Mechanical protection: IP 21 Total weight: approx. 3500 kg Year of manufacture: 2008 Plasma: TRC-121 OTC Daihen D-12000 30-120A Dksdpfx Ajz D Tq Eekmou Cutting up to 25 mm thickness with plasma If you have any further questions or require more information, please send us a message or call us.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Dksdpfx Aoz Ikz Aekmou Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding.

Year of construction: 2008, condition: used, Used machine Year of manufacture: 2008 Performance: 29 pallets/hour (at a package height of 1200 mm incl. pallet) Weight: 690 kg Dkjdpfx Akowt E Uasmeu Turntable diameter: Load capacity: 1200 kg Drive: Electric motor 550 W / 50 Hz 400 V Rotation speed: 10 rpm + 20% Rotation direction: right Film carriage drive: 370 W Top press carriage drive: 370 W Max. pallet dimensions: 1200 x 800 mm (base area) Film roll weight: approx. 17 kg Footprint: approx. 3600 x 1800 x 2600 mm Availability: short notice Storage location: Hesse

Condition: used, The Bindomatic 201 DFS, manufactured by Bindomatic, is a efficient binding machine designed for A4 format documents. Currently in production in Germany, this machine can bind documents up to 15 mm thick, which is approximately 150 sheets of 80 g paper. It has a throughput time of 90 seconds, allowing it to bind up to 300 documents in 12 minutes. The machine weighs 128 kg and features a display control, stand-by switch, and a resettable counter. Its dimensions are 107.5 x 49.0 x 94.0 cm. The delivery condition is FCA. Format: A4 Dsdpfx Asvfx H Iskmsku Equipment: 300 documents in 12 minutes Binding thickness: up to 15 mm (approx. 150 sheets of 80 g paper) Processing time: 90 seconds Dimensions: 107.5 x 49.0 x 94.0 cm Weight: 128 kg Functions: display control, stand-by circuit, resettable counter

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz Dkodjz Hngmjpfx Akmju • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 183 h, controller manufacturer: CYBELEC MODEVA BAC 2D Control, controller model: CYBELEC MODEVA BAC 2D Control, working width: 4,000 mm, bending force (max.): 290 t, control type: CNC control, Equipment: documentation/manual, BOSCHERT G-Bend Plus 4290 Dkjdpfx Akoywfp Sjmou

Condition: good (used), Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. - Up to approximately 30 strappings per minute. - Internal frame dimensions approximately 850 x 800 mm. - Secure strapping with 12 mm strap. - Automatic strap feed and strap return. - Adjustable strap tension. - Strapping can be triggered via hand button or foot switch, or alternatively, automatic mode selectable (sensor in the table top). - Simple and ergonomic spool change and threading system. - Equipped with ergonomic roller conveyors on the table surface. Dkedpsy Dvcijfx Akmou - Working height approximately 820 mm. - Machine can be moved and locked in place on castors. The machine can be demonstrated under power.

Condition: used, Year of construction: 2019, power: 4 kW (5.44 HP), 1. PRESCONTAINER LM10ASG +HKV, YEAR OF MANUFACTURE – 2019 OUTPUT – 5.5 kW CAPACITY – 10 m2 2. PRESCONTAINER LM10ASG, Dsdpfx Ajz Hclkekmjku YEAR OF MANUFACTURE – 2015 OUTPUT – 5.5 kW CAPACITY – 10 m2 3. PRESCONTAINER LM12R + HKV, YEAR OF MANUFACTURE – 2009 OUTPUT – 5.5 kW CAPACITY – 10 m2 4. PRESCONTAINER NP10APK, YEAR OF MANUFACTURE – 2011 OUTPUT – 5.5 kW CAPACITY – 10 m2 PRICE UPON REQUEST!

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, functionality: fully functional, Channel baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer Paal Type Konti 325 G Year of manufacture 2013 Operating hours 12,110 Pressing force 100 t Drive power 2 x 55 kW Feed opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Tying 5-fold automatic Dedpoz A T N Eofx Akmjku Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, maximum load weight: 15,230 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2016, total width: 2,480 mm, total height: 1,255 mm, Year of construction: 2016, Equipment: ABS, * NET PRICE * Turntable trailer * BPW axles with disc brakes * Underrun protection * Toolbox * Tires 385/65 R 22.5 * Tare weight: 2.0 kg * German vehicle * Top condition Dodpfxjzpccqj Akmsku WhatsApp: Errors and prior sales excepted!! Sale is made excluding any warranties!! - We speak Russian - We speak English - We speak Polish - We speak Spanish - We speak Turkish

Condition: excellent (used), Catalog number: 8118 TECHNICAL DATA PLANER: - cutterhead width 410mm - 3-knife cutterhead - adjustable angle guide - table length 1800mm - both tables adjustable JOINTER: - max thickness of workpiece on the jointer 180mm - cutterhead guard * from top to bottom: - infeed rollers - toothed infeed roller - planing roller - smooth outfeed roller * with horizontal drilling machine: - max tool diameter 16mm - max hole depth 120mm - max milling length 200mm - feed adjustment (front/back) with drilling machine - table adjustment (up/down and sideways) - adjustable roller in the lower table - 2 feed speed settings 8/12m/min - main motor 4kW - dimensions (L/W/H) 1800x1350x1150mm - weight 650kg Djdpfxjz Nkbyo Akmjku Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 2008, Control: HEIDENHEIN iTNC 530 Spindle: 35/47 Nm; 12,000 rpm Dkodpfx Akez Dizmsmju Tool Holder: HSK-A 63 Tool Magazine: 40 positions (disc type) Travel (X/Y/Z): 600 / 770 / 805 mm The machine is currently in storage. The images shown may not reflect its current condition while in storage.

Condition: used, Year of construction: 2008, Control system: HEIDENHEIN iTNC 530 Spindle: 35/47 Nm; 12,000 rpm Dsdez Diz Hspfx Akmeku Tool holder: HSk-A 63 Tool magazine: 40 positions (disc type) Travel (X/Y/Z): 600 / 770 / 675 mm The machine is currently in storage. The images shown do not necessarily reflect its current condition while in storage.

Condition: like new (used), Year of construction: 2011, operating hours: 237 h, KAESER N153-G compressor, serial no. 1042 / dryer / filters MANUFACTURER: KAESER TYPE: N153-G SERIAL NO.: 1042 YEAR: 2011 POWER (kW): 4 CAPACITY (m3/min): 1.33 PRESSURE (bar): 40 HOURS (SERVICE/TOTAL): FREQUENCY CONVERTER: BUILT-IN DRYER: EXCHANGER: COOLED (AIR/WATER): ON THE TANK: DOCUMENTS: Dodpfsz Hl Izox Akmsku CONNECTION: NEW/USED: USED

Condition: used, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2024, Int.-No.: Kögel Like-new trailer Kögel * AW 18-19.5 * BDF flatbed interchangeable chassis * 2-axle * SAF axles * permissible GVW 18,000 kg Trade-ins accepted Financing available from 3.99% Errors and prior sale excepted! Dsdpfxszp S N Tj Akmeku The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. Listed features are subject to separate verification. All information in the advertisements is non-binding! Delivery throughout Germany upon request. Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. Dedpfx Ajw Ighiokmsku - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: used, functionality: fully functional, Year of construction: 1989, operating hours: 8,775 h, load capacity: 3,000 kg, lifting height: 3,175 mm, fuel type: diesel, mast type: free lift with telescopic boom, gearing type: automatic, empty load weight: 5,380 kg, color: red, Equipment: 3rd hydraulic function, cabin, lighting, pallet forks, Cab with heating (driver's door included), side sliding door (disabled), German-made engine. For sale to commercial businesses only, with no warranty of any kind. Loading possible. Dkedpfez E R Hyex Akmsu