Used Jenbacher Generator for sale (9,379)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 72,000 h, functionality: fully functional, fuel type: gas, color: green, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, type of cooling: water, Available complete Jenbacher 320 power plant with 72,000 operating hours. The engine is from 1998. An overhaul was performed at 42,000 hours, after which the maintenance schedule has been closely followed. It was shut down running at full load (1MW) without any issues. All auxiliaries are included except for the transformer and circuit breaker. Kljdeytq Hgjpfx Aarst

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Kedpfx Ajwd Nw Tearelt Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, Year of construction: 2008, operating hours: 110 h, functionality: fully functional, power: 834 kW (1,133.92 HP), fuel type: gas, Jenbacher J316 Bio Gas generator containerized set - Manufacturer: Jenbacher - Model: J316 - Hours 110k Kljdpsy S Ttbjfx Aarjt - Year of Manufacture: 2008 - Rated Output Power: 834 kW - Frequency: 50 Hz - Alternator: Stamford New alt installed 2017 -XT4 New turbo installed 2k hours ago. Contact for more info.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller Klodpfx Aajxfrv Ejrot CNC Top Ten bv Coevorden, Netherlands

Condition: excellent (used), Year of construction: 2010, operating hours: 122,471 h, functionality: fully functional, power: 1,095 kW (1,488.78 HP), fuel: domestic gas L, rotational speed (min.): 1,500 rpm, type of input current: three-phase, Jenbacher J320 GS Gas Generator – 1095 kW Main specifications: Engine model: Jenbacher J320 GS Rated power: 1095 kW (ISO 3046) Speed: 1500 rpm Engine weight: 5200 kg Year of manufacture: 2010 Running hours & performance: Total operating hours: 122,471 h Active energy produced: 11,781 MWh Reactive energy: 7,327.8 Mvarh Alternator: Manufacturer: Stamford (AC Generators) Bearing types: 6319 C3 / 6228 C3 Grease type: Kluber Asonic GHY72 Re-lubrication interval: every 4000–4500 hours Kedpfxsxb D Hbo Aarelt Heat exchanger: Manufacturer: Tranter International AB Model: GXD-042 Year of manufacture: 2010 Max. operating pressure: up to 30 bar Max. operating temperature: up to 75 °C Connection material: steel Condition: Equipped with Jenbacher DIA.NE control and monitoring system Fully serviced in line with OEM schedules by an official service centre Excellent working condition 📍 Location: England

Condition: used, operating hours: 60,000 h, functionality: fully functional, fuel type: gas, output frequency: 50 Hz, Availability of used gensets of 1.0 and 1.2 MW. Good conditions, Major overhaul to be done. Kodpfx Aet Dipmjarolt Turbines included if requested and available Possibility of purchasing single units or multiples (subject to availability).

Condition: used, Year of construction: 2011, operating hours: 85,000 h, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, Full trigeneration plant with York absorption chiller. Regularly maintained and covered by the supplier’s preventive and corrective maintenance contract. Major overhaul performed in 2021 at 61,000 operating hours. Kljdpfx Aaoy Ibldorst New Long Block (LB) supplied by INNIO on the occasion of the major overhaul, documentation available. • 87,670 plant hours; • 26,904 engine hours; The crankshaft has not been machined, while the engine block has been machined for the use of oversized liners. Overhauled alternator, report available. Price and further information available upon request.

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Kljdpfx Aaoy Av Rderot Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Condition: used, operating hours: 51,000 h, functionality: fully functional, Please find below the details of the 2 containerised gas gensets available for sale: Engine No. 1 CHP complete unit J320GS Kledpfx Asyvry Ijarst Power: 1063 kW Year: 2000 Hours: 50,000 Condition: Excellent Fuel: Biogas Control panel: DIA.NE BLUE (switchable panels) Complete overhaul carried out at 60,000 hours Engine No. 2 CHP complete unit J320GS Power: 1063 kW Year: 2011 Hours: 51,000 Condition: Very good Fuel: Biogas Control panel: DIA.NE X (switchable panels) Complete overhaul carried out at 60,000 hours The units are currently loaded and available in Lille, North of France. Total price: €130,000 for both units. Please let me know if you need any additional information or if you would like to arrange an inspection.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer Kjdsytg Rbspfx Aarelt - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: ready for operation (used), Year of construction: 2018, operating hours: 19,681 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, overall weight: 23,000 kg, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER 620 GS-NL (Complete Package) Available complete natural gas power plant based on Jenbacher 620 GS-NL, already dismantled and ready for loading. The unit was stopped while running properly at full load. Maintenance All maintenance has been performed by official services, following the manufacturer’s schedule. Premium shortblock: completed in 2018 (report available). Skid / generating set components: 2008. Borescope inspection: available. Technical data Brand: Jenbacher Model: 620 GS-NL Power: 3,044 kW Fuel: Natural Gas Frequency: 50 Hz Total running hours: 19,681 h Voltage: 6,300 V Scope of supply (included) Ksdpfxsytgxfo Aarslt Genset Gas train “Diane Blue” Silencer Oil system Refrigeration system Transformer Switch breakers Auxiliaries cabinet Status / Availability Availability: Immediate The assets are already dismantled in our warehouse, ready to be loaded or inspected. For more information please contact us!

Condition: used, Year of construction: 2020, KWe: 1222 Working hours: 29000 Kedpfx Ajym Rnqjarelt

Condition: used, mileage: 613 km, power: 5 kW (6.80 HP), first registration: 07/1989, fuel type: diesel, overall weight: 500 kg, color: blue, gearing type: mechanical, suspension: other, operating hours: 613 h, Year of manufacture: 1989. 13.5 kW, 613 operating hours, 2,800 rpm. Airflow rate: 2.1 m³/min. Fitted with a Deutz engine, highly soundproofed, complete with hoses and hammer set. Permissible total weight: 500 kg. FOR US, CONDITION AND A GOOD FEELING ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the provided number. //EXCHANGE, TRADE-IN, OR COLLATERALIZATION OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee. Further offers can be found on our homepage. The description and listed data do not constitute a guaranteed specification and are not legally binding. The only binding agreement is the purchase contract made at our dealership upon buying the vehicle. Subject to errors and prior sale! Kledex Upngepfx Aarst

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Kledpsyl Nntofx Aarjt

Condition: good (used), Year of construction: 1995, Engine: JGC312 with 551 kW (year 1995) - Turbocharger overhauled 4,000 hours ago - Additional oil cooler – 3 years old - Cylinder head – new in 2017 - Charge air cooler overhauled 4,000 hours ago - Exhaust manifold – new in 2021 - Complete engine overhaul in 2017 Kedpfx Aovcm Nfsarelt Offer is made without guarantee of availability.

Condition: excellent (used), Year of construction: 2012, operating hours: 95,000 h, functionality: fully functional, machine/vehicle number: Vers. J18 (adattato F12), fuel type: gas, power: 2,651 kW (3,604.35 HP), output voltage: 6,300 V, output frequency: 50 Hz, nominal power: 2,714 kW (3,690.01 HP), Currently operational until June 2026. Longblock replacement performed during major overhaul (68,000 operating hours). Upon disassembly, a minor overhaul will be required. Regularly maintained and covered by the supplier’s preventive and corrective service contract. The system is complete with: - heat exchanger for steam production (Siat 1,168 kW); - SEA transformer, 6,300 --> 21,000 V. Dia.Ne version: XT 3. Kodpfx Aasrdx Dderjlt

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period. Kledpfxsx U Tgme Aaret

Condition: used, Year of construction: 2006, operating hours: 85,064 h, functionality: fully functional, machine/vehicle number: J320GSC105, Total running hours: 85,064 Ksdpfsymzn Uex Aarjlt No overhaul Genset was purchased brand new from Jenbacher ISO Standard Power: 1,095 kW (kilowatts). Engine Speed: 1,500 min⁻¹ (RPM). Standard Reference: ISO 3046 Total Weight: Approximately 5,200 kg. (Radiator excluded) The package includes the complete engine (with a fully functional turbocharger), alternator, and electrical panels (DianXT). The container/enclosure can also be included if required (based on the offered price). Price including Container 53,000 €

Condition: excellent (used), Year of construction: 2020, operating hours: 5,065 h, functionality: fully functional, power: 901 kW (1,225.02 HP), total height: 2,990 mm, total length: 12,000 mm, total width: 2,990 mm, fuel: domestic gas H, Equipment: documentation/manual, For sale is a natural gas combined heat and power (CHP) plant in containerized design and a chimney with 3 flues: Short description: CONTAINER CHP 901 kWe / 928 kWth Natural gas engine: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Further information: Kodpfxjvuz Uto Aarjlt - Complete CHP package in a container (12x3x3 m), super silent, color RAL7004, including mixture cooling and emergency cooling as a table cooler, outdoor glycol protection system, oxidation catalyst (Oxikat), provision for SCR system, island operation capability, Profibus DP interface, etc. - Supplied as per technical drawings, documents, P&ID diagrams, and data sheets. - Genset has completed 5,056 operating hours (operating period: 01/2021 - 12/2021). - The entire CHP plant is in excellent condition, the genset was regularly serviced under a premium service contract, and is currently under the manufacturer’s care.

Condition: reconditioned (used), functionality: fully functional, overall weight: 2,000 kg, shaft diameter: 175 mm, length (extended): 4,418 mm, motor model: J624GS-F, Crankshaft J624, overhauled and ready for installation. Features connecting rod journals at a nominal size of 175 mm and main bearing journals machined to 194.5 mm (compared to the standard 195 mm) to ensure uniform fits. Hard chrome plating has been applied to journals N4 and N5 to restore dimensions and ensure surface smoothness. The component has undergone thorough inspections to guarantee proper functionality during installation. Technical Specifications Type: KURBEL Engine: J624GS-F Length: 4,418 mm Main bearing diameter: machined to 194.5 mm (standard 195 mm) Kjdpexu Atasfx Aarjlt Connecting rod journal diameter: 175 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01013115, overall weight: 15 kg, color: green, output voltage: 250 V, type of output current: DC, number of cylinders: 24, ambient temperature (min.): 18 °C, ambient temperature (max.): 65 °C, The MIC950 version C is a state-of-the-art ignition controller designed to optimize the performance of Jenbacher gas engines in the most demanding industrial applications. Thanks to its advanced architecture, this unit ensures precise ignition control, improving energy efficiency and reducing emissions. Additional uncategorized technical details: Minimum input voltage: 18 V DC Kodpfx Aaowtmlterslt Maximum input voltage: 32 V DC Nominal power: 24 V nom. Output voltage: 250 V DC Minimum temperature: -13°F Maximum temperature: +149°F Compatibility: Jenbacher series 2, 3, 4, and 6 Availability: 173 units in stock

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Klsdpsw U N Daofx Aaret

Year of construction: 1998, condition: used, functionality: fully functional, (USED) General Cargo Container in Steel, approximate measurements 12 m long x 2.30 m wide x 2.30 m high, Year 1998. Please Inspect. DOES NOT INCLUDE CONTENTS, DELIVERY WILL BE MADE WHEN THE CONTAINER IS EMPTY Kjdpfxsy Sirgs Aarslt (USADO) Contenedor de carga General en Acero, medidas aproximadas 12 m de longitud x 2.30 m de ancho x 2.30 m de altura, Año 1998. Favor de Inspeccionar. NO INCLUYE CONTENIDOS, LA ENTREGA SE REALIZARÁ AL VACÍAR EL CONTENEDOR

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Ksdpfxeruakgo Aarolt Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Klodpfx Aexaqa Searet Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg