Used Jonab Planing Line Mechanization With Stacker for sale (17,072)

Condition: used, tilting depiler for 6-meter packages, discharge chains, four-sided feeder with striking wheel, moulder outfeed with stacker, price on site not dismantled Hfedpfoyw S Rvsx Ab Nog

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Hedpfx Aboxb U Txe Nsfg Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Hjdsy Rflyspfx Ab Nofg Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed. Hfedpfx Abey Auvxs Nog

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Hfsdpsm Uyknsfx Ab Neg

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150 Hodpfsi D D Efsx Ab Nofg

Condition: excellent (used), Complete high-performance planing line with WACO 6-head planer, double resaw bandsaw, full mechanization, moisture measurement, control system, etc. Truly complete! Capacity approx. 2,500–4,500 m3 per month and shift, depending on dimensions. Hodpjykmixsfx Ab Nofg

Condition: good (used), Year of construction: 2004, machine/vehicle number: 300 584, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 400 V, input current: 85 A, type of input current: three-phase, overall weight: 8,000 kg, year of last overhaul: 2016, We are selling a complete shredding line including: Hfsdpfx Ajxrtwweb Njg - Artech RS75 shredder - Pusher / compactor - Electrical control cabinet - Overband magnet - Sampler The loading conveyor and the discharge conveyor after shredding are not included in the sale.

Condition: good (used), Year of construction: 2003, Mechanization for destacking wood bundles up to 6 meters long. Bundle deposit chains with a 5-position storage magazine 1 tilt-type destacker 1 descent section with strip retrieval 1 stick separator with bars 1 horizontal conveyor with 5 chains Hfjdjycxd Eopfx Ab Nsg

Condition: ready for operation (used), Planing and re-saw line with below main equipment: 9 head planer type WACO 3000 Feeding speed 0 - 90 m/min Max planing width Min planing width Max planing height Min planing height Hedpfjxb Aklsx Ab Njfg Canali double bandsaw type ML1100 Marking equipment Stacker and packing machine Press for packages Grinding equipment for planer. For more data and information please see below link to youtube

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Hfodpfxoth Taaj Ab Nsg Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt Hfjdpfx Ajwgbw Rob Nog 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Year of construction: 1995, condition: ready for operation (used), For sell we have whole line. System TM Bison loading machine Weinig Hydromat H 22 B year 1989 System TM Angus unloading 450 - 2500mm lenght 20 - 80 mm height 45 - 160 mm width Hedpfx Aotqdfisb Nefg

Condition: used, Year of construction: 2020, Planing line Lifting table Cross conveyor Loading table Planer Leadermac 36 m/min Output table Hfedowtcm Hspfx Ab Nog Cross conveyor Mechanization manufactured in 2020

Condition: excellent (used), Meren Jonson Multi-Saw with Automation Powered roller infeed with centering Roller outfeed with side pusher Rubber crawler feed system Hsdpfx Aoxm Sczeb Nefg Press rollers under the shaft for cutting short pieces Smooth feed speed adjustment Maximum cutting height: 100 mm Supported saw shaft Main motor: 75 HP (56 kW) Planer Double-sided planing (top and bottom) Working width: 610 mm Working height: 152 mm Bottom motor power: 15 kW Material removal: 12.7 mm Electrically adjustable working height Maximum feed speed: 30 m/min Automatic lubrication system Total power: 50 kW

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 45 kg, permissible axle load (axle 2): 45 kg, permissible axle load (axle 3): 45 kg, loading space width: 3,000 mm, loading space height: 1,170 mm, total width: 3,000 mm, total height: 1,170 mm, suspension: hydraulics, tire size: 215/75R17.5, wheelbase: 1,500 mm, color: red, Year of construction: 2026, Main Features Year: New Universal Gooseneck SH 35/2 Loading platform: 3,700 mm x 2,440 mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic support cylinders Coupling height: 1,450 mm Integrated lashing points Lashing rings Spare wheel + spare wheel holder Hydraulic locking pin Automatic lubrication for gooseneck with Beka-MAX pump Hatz Diesel PPU Hatz single-cylinder diesel engine (silent pack) @ 9.6 kW 240 L hydraulic oil tank, powder coated 35 l/min flow rate and max. working pressure of 250 bar Three sizes of quick couplers for pressure connection Three sizes of quick couplers for tank connection Electric RPM control THP SL 3 Max. axle load: 45,000 kg per axle Total axle load: 3 x 45,000 kg = 135,000 kg GVW: 135,000 kg Unladen weight: 10,650 kg Payload: 124,350 kg Total length: 4,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 4 Max. axle load: 45,000 kg per axle Total axle load: 4 x 45,000 kg = 180,000 kg GVW: 180,000 kg Unladen weight: 13,850 kg Payload: 166,150 kg Total length: 6,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 5 Max. axle load: 45,000 kg per axle Total axle load: 5 x 45,000 kg = 225,000 kg GVW: 225,000 kg Unladen weight: 17,250 kg Payload: 207,750 kg Total length: 7,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 6 Max. axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Unladen weight: 19,800 kg Payload: 250,200 kg Total length: 9,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Low Profile Deck FB 300 - 10,000 mm, without mechanical coupling, non-driveable - Payload rating in combination (6+6): 300 t - Height 300 mm, length 10,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - Bogies for modular configuration - Dead weight approx. 21,300 kg - Incl. hydraulic locking pin for connecting modular bogies lengthwise 1 x Low Profile Deck FB 250 - 8,000 mm, with mechanical coupling, non-driveable - Payload rating in combination (6+6): 170,000 kg - Height 250 mm, length 8,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - 1x extension for low profile deck, 4,000 mm - 1x extension for low profile deck, 5,000 mm General Information Year of construction: 2026 Hfodpfx Abex S Evbs Neg Axle Configuration Tyre size: 215/75 R17.5 Axle brand: BPW Eco Plus Suspension: hydraulic suspension Center axle 1: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 2: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 3: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 4: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 5: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 6: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Functional Deck height: 117 cm Extendable chassis: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Financial Information...

Condition: good (used), mileage: 502,853 km, power: 478 kW (649.90 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, fridge, navigation system, onboard computer, parking heater, retarder, second fuel tank, soot filter, spoiler, = Additional options and equipment = - Roof spoiler - Cabin - Air suspension - Particulate filter - Auxiliary heater Hfjdpfxey Hq E Ro Ab Nog = Notes = Scania R650 Highline 6x4 – Manual gearbox with retarder – Full air – 2x tanks MY: 20-7-2020 KM: 502,853 YS2R6X40005591186 6x4 Manual gearbox Retarder Full air suspension 2x tanks Navigation Refrigerator = Further information = Technical information Number of cylinders: 8 Transmission Transmission: Opti Cruise, 12-speed, automatic Axle configuration Suspension: air suspension Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Tyre tread left: 40%; Tyre tread right: 40% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 13,000 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Rear axle 2: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 13,000 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Weights Unladen weight: 10,664 kg Payload: 502,853 kg Gross vehicle weight: 34,999 kg Condition Technical condition: good Optical condition: good

Condition: good (used), mileage: 472,401 km, power: 213 kW (289.60 HP), first registration: 03/2015, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,420 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,400 mm, loading space width: 2,520 mm, loading space height: 2,620 mm, Year of construction: 2015, Equipment: AdBlue, cruise control, tail-lift, = Additional Options and Equipment = - Rear work lights - Front work lights - Heated mirrors - Windscreen - Automatic heating system = Remarks = MAN TGM 18.290 – Tautliner with sideboards – Tail lift – Full air suspension – Euro 6 – Automatic transmission Year of manufacture: 1-3-2015 Mileage: 472,401 km VIN: WMAN28ZZ5FY322324 Box dimensions: 7.40 x 2.52 x 2.62 m Tail lift Full air suspension Euro 6 Automatic = Further Information = Suspension: Air suspension Front axle: Tire size: 315/70R22.5; Max. axle load: 7,500 kg; Steered; Tire tread left: 20%; Tire tread right: 20% Rear axle: Tire size: 315/60R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left (inner): 50%; Tire tread left (outer): 50%; Tire tread right (inner): 50%; Tire tread right (outer): 50% Gross vehicle weight: 18,000 kg Tail lift: Rear flap Technical condition: Good Visual condition: Good Please contact VAEX The Truck Traders for more information. Hjdjyk E A Djpfx Ab Nefg

Condition: excellent (used), first registration: 08/2010, color: green, Year of construction: 2010, Equipment: ABS, = Additional options and equipment = - Central lubrication system = Further information = Extendable body: Yes Technical condition: very good Visual condition: very good Price: On request Hedpfx Abjuxycue Nsfg KAMAG K22 MODULE 12 AXLES WITH GREINER LOWBED FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES OFFERED FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: used, Year of construction: 1998, operating hours: 6,720 h, functionality: fully functional, machine/vehicle number: 22.303, planing height: 300 mm, planing width: 400 mm, rotational speed (max.): 5,800 rpm, height adjustment type: electric, compressed air connection: 7 bar, input voltage: 400 V, number of spindles: 12, power: 111.2 kW (151.19 HP), chip removal: 20 mm, input frequency: 50 Hz, input current: 327 A, For sale is a heavy-duty, industrial-grade four-sided planer Rex 410 complete with extensive HIT mechanization, designed for the efficient processing of structural timber, KVH/BSH products, and profile boards. The system is suitable for: • Pre-planing • Lamella planing Hjdpfx Absyk E R Io Nsfg • Final planing of KVH/BSH • Profile production • Continuous beam processing including turning and patching The machine features 12 spindle units including chamfering devices and is engineered for high material removal rates as well as large cross-sections. Sold ex-location (machine is not dismantled). If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE Hsdpfx Aethg Dieb Nsfg ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car Hjdpfetiy Ntox Ab Nofg 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 2006, operating hours: 20,000 h, condition: used, functionality: fully functional, machine/vehicle number: 114058, Used Metla Toledo Safe Line Metal detector Used for 60,000 Buns per hour Taken out of commission in 2024 Air Reject system Reject Bin with Hood and sensor Belt Included Lh hand machine Hsdpfxey R S Ize Ab Nefg Rh Hand Machine

Condition: used, This listing is for a second-hand Konica Minolta accessory: the ‘Konica Minolta LS-507 Stacker’ Compatible with various Konica Minolta AccurioPress models (code WY1) Condition: This is a second-hand item, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality Packaging and shipping: Hodpfx Ajy R Ntbsb Njfg You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, 4 dividing saws Saw blade max.: 700 mm Hjdpfxjy R Eixs Ab Nofg Cross-cut capacity: 180 x 220, 160 x 300 mm Saw motor: 4 kW