Used Kässbohrer S 150 for sale (73,244)

Condition: used, mileage: 893,188 km, power: 176 kW (239.29 HP), first registration: 03/1975, fuel type: diesel, number of seats: 50, gearing type: mechanical, emission class: euro1, color: beige, total length: 12,000 mm, total width: 3,190 mm, total height: 2,500 mm, Year of construction: 1975, Equipment: trailer coupling, = Additional options and accessories = - Autoradio - Double glazing - Electrically operated mirrors - Individual air cooling - Portable radio set - Sun visor - Tachograph = More information = Transmission: 6 gears, Manual gearbox Crodjy Hu Agspfx Ad Neb Engine capacity: 11.869 cc Make of engine: Henschel Tyre tread remainder on axle 1: 30% Tyre tread remainder on axle rear: 30% Door count: 2/3

Condition: good (used), Year of construction: 2001, functionality: fully functional, Description Crsdsvk Uqmopfx Ad Neb MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60 Specifications Manufacturer ARBURG Model 270 S 150-60 U - ALLROUNDER Year 2001 Condition Used

Condition: used, mileage: 580 km, power: 66 kW (89.73 HP), first registration: 05/1962, fuel type: diesel, number of seats: 22, gearing type: mechanical, color: beige, Year of construction: 1962, Available in multiple colors (yellow/red/green), built between 1957 and 1964. Codsy Iau Depfx Ad Norb We also have 8 restoration projects ready to start immediately. Features: 8 sleeping seats or 20 seating capacity * Double tour guide seat * Large club lounge for 8-seat configuration Length: 6,650 mm Width: 2,250 mm Permissible total weight: 6,200 kg Complete restoration Henschel engine Steering wheel manual transmission Roof luggage rack German historic (H) registration, passenger coach - Rental for your event possible. Europe-wide delivery available with our vehicle transporters. We have a wide selection of classic Setra buses: S6, S7, S9 to S14, Mercedes O 319 and O 3500, Saurer bonnet buses. We make shipment worldwide. Net price: 165,000.00 Euro

Condition: used, mileage: 880,000 km, power: 125 kW (169.95 HP), first registration: 05/1963, fuel type: diesel, number of seats: 48, gearing type: mechanical, color: brown, Year of construction: 1963, Restoration Project Seats have already been refurbished. Full restoration available upon request. Unladen weight: 7,580 kg Permissible total weight: 11,800 kg Maximum speed: 95 km/h - Rental available for your event. Delivery across Europe possible with our vehicle transporters. Further restoration projects: Setra S 9 Year of manufacture: 1960, 125 hp Henschel engine with 5-speed gearbox, 39+1 seats, decommissioned since 1996. This vehicle already features the new front end and high side windows. Vehicle no. 26 out of 124 built from the first S 9 series. Price: €22,000.00 Crodpfoy Iau Rex Ad Nob Setra S 10 Year of manufacture: 1962, 132 hp, 8-speed manual transmission, level passenger floor, which is very rare. This vehicle also has the updated front of the later series installed at the factory, chassis in very good condition. Price: €25,000.00 Rare S 14 Vehicle is complete and worth restoring. 6-speed synchronized manual transmission, 190 hp Henschel engine. Price: €19,990.00 All vehicles are restoration projects. Optional full restoration available upon request—see pictures. Second engines and gearboxes, as well as parts and new components for the restoration of these vehicles, are available for all models. Net export possible. We make shipment worldwide.

Condition: used, mileage: 554,000 km, power: 99 kW (134.60 HP), first registration: 08/1966, fuel type: diesel, number of seats: 26, gearing type: mechanical, color: green, Year of construction: 1966, Equipment: air conditioning, parking heater, Rare S 7 Fully restored First registration in Austria. For the last 35 years, it served one family as a motorhome. Length: 7,600 mm Height: 2,860 mm Unladen weight: 5,700 kg Gross vehicle weight: 8,100 kg Width: 2,300 mm Engine: Henschel 99 kW / 135 hp Displacement: 6,126 cc 5-speed manual ZF transmission Top speed: 107 km/h - Rental possible for your event. - Europe-wide delivery available with our vehicle transporters. Setra S 7 2 face-to-face tables Club lounge Refrigerator Air conditioning Net export possible. Codpfxsy Iatge Ad Nsrb We make worldwide shipments. Further restoration projects: Year of manufacture 1960, 125 hp Henschel engine with 5-speed gearbox, 39+1 seats, deregistered since 1996. This vehicle already features the new front and high side windows. Vehicle no. 26 of 124 built of the first S 9 series. Price: €22,000.00 Setra S 10 Year of manufacture 1962, 132 hp, 8-speed manual transmission, level passenger floor, which is very rare. This vehicle already has the new factory front of the later series, frame in very good condition, price: €25,000.00. Rare S 14 Complete vehicle, suitable for restoration. 6-speed synchronized manual transmission, 190 hp Henschel engine, price: €19,990.00. Vehicles are restoration projects. Optionally available fully restored upon request (see pictures). For all vehicles, spare engines and gearboxes can be purchased, as well as parts and new components for restoring these vehicles. Net export possible. We make worldwide shipments.

Condition: excellent (used), mileage: 508,877 km, power: 110 kW (149.56 HP), first registration: 09/1991, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, Year of construction: 1991, Tail lift: Yes WVML044053G070621 = More information = Empty weight: 5.260 kg Carrying capacity: 5.140 kg GVW: 10.400 kg Technical condition: very good Visual appearance: very good Registration number: 1WBE674 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Cjdpfjymrvpsx Ad Njrb If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 343,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,900 mm, total width: 2,100 mm, total height: 3,100 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, * Iveco Daily 35 - 150 box body with tail lift - 3 seats - air conditioning - 2 units available - * Diesel - 2,998 cc - 110 kW - 150 hp - Euro 6 - Green emission sticker - TÜV * The 2nd Iveco is from 05/2019 and has 383,000 km - Price is per vehicle - * Auxiliary heater / radio / ABS / ASR - 6-speed manual transmission - Vehicles with lettering - * Vehicle dimensions: Length: 6,900 mm x Width: 2,100 mm x Height: 3,100 mm * German vehicles - German registration documents - Vehicles immediately available - * Vehicles show signs of use and have some optical defects * Subject to errors, printing mistakes, and prior sale * Please make an appointment for viewing & test drive * Contact person: Andreas Vogel Special equipment: Storage compartment on dashboard with USB connection, audio navigation system: CD player with MP3 capability, USB and Bluetooth hands-free kit, roof shelf with additional DIN compartment, vehicle key with remote control, rear axle suspension: reinforced parabolic (stage 2), 210 A alternator, A-pillar grab handle, comfort headrests in passenger compartment, fuel tank: 90 liters, spare wheel with road tires, spare wheel holder between longitudinal members, interior cargo area lighting switch, front mud flaps, cab seats: luxury driver’s seat Other features: Driver airbag, pre-wired for trailer socket, traction control (ASR), version: S-series, electrically adjustable and heated exterior mirrors, brake assist, electronic brake force distribution, front axle suspension: transverse leaf spring, tinted windscreen and side windows, speed limiter system 160 km/h, body/chassis: standard flatbed, instrument cluster with pixel matrix display, headlamp range adjustment, engine 3.0 L - 110 kW diesel, radio pre-installation with speakers, wheelbase 4,100 mm, low emissions according to Euro 6 standard, cab seats: double passenger seat with headrests, service indicator, gross vehicle weight 3.50 t Crjdey A Uz Iopfx Ad Njb

Condition: excellent (used), A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom. Therefore, we are not only talking about mixing particles, but about a more complex process that can integrate emulsification, homogenization, solubilization, suspension, dispersion and disintegration of solid particles. To carry out this particle size reduction, the product is pumped under pressure by means of valves and pistons in monobloc compression blocks. These valves allow us to define the desired flow rate and pressure. Csdpowny Nzofx Ad Nsrb

Condition: good (used), Year of construction: 1999, operating hours: 139,541 h, machine/vehicle number: 175489, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 97 cm³, injection weight: 97 g, ejector force: 30,000 N, overall weight: 2,250 kg, type of input current: DC, For sale is a reliable ARBURG Allrounder 320 S 500 - 150 (SELECTA Series) from 1999. The machine comes from a well-maintained industrial facility and is renowned for its durability and precision in plastics processing. Technical Data: Model: Allrounder 320 S 500 - 150 (Selecta) Machine No. / Serial No.: 175489 Year of manufacture: 1999 Operating hours (auto): 139,541 h Total connected load: 35.5 kW Total rated current: 66 A Electrical specifications Operating voltage: 400 V (3~ / 50 Hz) Control voltage: 230 V (~ / 50 Hz) DC control voltage: 24 V (DC) Rated current (motor/heating): 54.0 A / 12.0 A Machine dimensions & weight Length: approx. 3.40 m to 3.80 m (depending on injection unit version) Width: approx. 1.43 m Height: approx. 2.00 m Total weight: approx. 2,250 kg Tie bar spacing (h x v): 320 mm x 320 mm Platen size (h x v): approx. 445 mm x 445 mm (up to 498 mm depending on configuration) Cedpfx Ajy Dfqcsd Nerb Minimum mold installation height: 225 mm Opening stroke: 350 mm Max. daylight between platens: 575 mm Transport and loading can be organized Europe-wide, subject to an additional charge. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Gantry Portal Milling Machine / Manufacturer: WALDRICH SIEGEN Type: PF-S-150 - 1953: Original year of manufacture (originally a workbench) - 1974: Reconstruction by the manufacturer WALDRICH SIEGEN to a portal milling machine (completely new milling support) - 2001: Modernised to CNC, with new electrical control cabinet - 2015: Modernization / Reconstruction to NC table drive - 2024: Reconstruction to crossbeam drive (gantry) Machining options: - Milling/Boring: horizontal/vertical The machine can be inspected by appointment under power. Condition: Ready for operation. TECHNICAL DATA / DESCRIPTION: Travel distances of feed axes (CNC): - Table: 14.000 mm - Crossbeam support: 4.500 mm - Crossbeam: 4.000 mm - Stand passage: width 4.545 mm - Clear width: 4.200 mm - Height from table to spindle: 4.000 mm - Quill: 450 mm Crjdpfx Ajyz Ru Usd Nob - Table size / clamping: 14.000 x 4.350 mm - Table load: max. 200 tons (10 tons point load) - Drive power of main spindle motor: 125 kW - Total machine weight: approx. 350 tons - Space requirement for entire machine: Length 40 / Width 10 / Height above floor 9 m EQUIPMENT / ACCESSORIES: - CNC control: SINUMERIK 840D - Documentation - Additional comprehensive equipment ... No guarantee is given for the completeness and accuracy of the technical information and equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), functionality: fully functional, CNC WORKING CENTER model BUSELLATO S-MASTER H150 second hand machine 3 axes working condition : very good CE mark : YES volt. 380/50 composition : 1. vertical router with automatic tools change 2. horizontal router 3. boring unit X / Y ( horinzontal and vertical ) 4. saw blade unit useful size (working range) mm. 3200 x 1350 Crodoyfudgspfx Ad Neb working travel of the axes : X=4000 mm. Y=1430 mm. Z=265 mm. Maximum panel thickness mm.120 Maximum panel clearance mm.150 Installed power 16 kW Machine weight 4500 kg

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Credpfx Adsq Abnne Nob Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 1998, clamping force: 500 kN, For sale is an Arburg 320 S 500-150 injection moulding machine. The item is in good condition. Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500 - 150 Machine number (Serial number): 174967 Year of manufacture: 1998 Clamping force: 500 Voltage: 400 V 3∼ Frequency: 50 Hz Operating hours: 2,250 Current (unknown): 0.3 A Connected load / Power (unknown): 1×15.00 kW Total weight (unknown): 21.3 Transport and loading can be organised throughout Europe upon request and for an additional charge. Prices are exclusive of VAT. Credpfx Ajyxp Eaod Nob Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2000, functionality: fully functional, clamping force: 150 kN, screw diameter: 18 mm, For sale is an Arburg 220 S 150-60 183385. The machine is in good condition and fully operational. Crjdpfx Asyxnmpsd Neb Technical specifications: Clamping force: 150 kN Opening stroke: 275 mm Mold installation height: 150 mm Clear tie bar distance: 221 x 221 mm Injection unit: 60 Screw diameter: 18 mm Calculated shot volume: 20 cm³ Shot weight: 18 g/PS Injection pressure: 2,500 bar Injection rate: 32 cm³ Net weight: 1,900 kg Pump hours: 94,830 h Automatic operation hours: 85,152 h The offer refers exclusively to the machine without mold/tools; these can be negotiated separately. Transport and loading can be organized across Europe at additional cost upon request. Prices are plus VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, mileage: 121,398 km, power: 110 kW (149.56 HP), first registration: 05/2020, fuel type: diesel, axle configuration: 4x4, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 212 g/km, fuel tank capacity: 70 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, onboard computer, power mirror, sliding door, start-stop system, traction control, trailer coupling, = Additional options and features = - Rear parking sensors - Right-hand side sliding door - Attention assist - Heated exterior mirrors - Passenger airbag - Differential lock - Electric front windows - Euro 6 - Driver's airbag - Remote central locking - Rear doors - Wooden load bed - Height-adjustable steering wheel - Comfort seats - Cornering lights - Leather steering wheel - Lumbar support - Front center armrest - Multifunction steering wheel - Multimedia compatibility - Fog lights - Radio - Reversing camera - Rear window wiper - Immobilizer - Post-collision response system - Partition wall Codpfx Aoxzdhlsd Nsrb = Further information = General information Number of doors: 5 Model range: Sep. 2019 - Dec. 2022 Model code: T6.1 Cab type: single Technical information Torque: 340 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Maximum speed: 179 km/h Dimensions Length/Height: L1H1 Weights Kerb weight: 1,993 kg Payload: 1,007 kg Gross vehicle weight (GVW): 3,000 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Interior Interior trim: black Consumption Average fuel consumption: 7.3 l/100km Maintenance, history and condition General inspection (APK): valid until 04/2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 141,935 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, wheelbase: 3,400 mm, first registration: 09/2020, fuel tank capacity: 70 l, CO₂ emissions: 210 g/km, emission class: euro6, color: white, number of seats: 2, number of previous owners: 3, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, traction control, trailer coupling, = Additional Options and Equipment = - Front parking sensors - Front and rear parking sensors (7X2) - Right-hand side sliding door - Android Auto - Apple CarPlay - Attention assist - Automatic dipped beam - Automatically dimming interior rearview mirror - Heated exterior mirrors - Passenger airbag - Bluetooth car kit - Differential lock - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Speed-sensitive power steering - Hill-hold control - Wooden loading floor - Cornering lights - Front center armrest - Multimedia capable - Fog lamps - Rear parking sensors - Radio - Rain sensor - Tire pressure monitoring system - Voice control - Start/stop system - Immobilizer - Post-collision mitigation system - Partition wall = Additional Information = General Information Number of doors: 5 Model range: Aug. 2019 - May 2020 Crjdpoym Tztsfx Ad Nsb Model code: T6 Cab type: single Technical Information Torque: 340 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Transmission: 6-speed manual Acceleration (0–100 km/h): 11.1 s Top speed: 182 km/h Dimensions Length/height: L2H1 Dimensions (L x W x H): 530 x 190 x 199 cm Weights Unladen weight: 1,999 kg Payload: 1,001 kg Gross vehicle weight: 3,000 kg Interior Interior trim: black Consumption Average fuel consumption: 7.3 l/100km Urban fuel consumption: 8.5 l/100km Extra-urban fuel consumption: 6.6 l/100km Maintenance, History, and Condition Booklets: Available APK (Dutch MOT): valid until 09/2026 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen, Wasaweg 22, 9723JD GRONINGEN, NL

Condition: new, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Tape dimensions 150 x 2000 mm Belt speed 14.5 / 29 m/sec. Contact disc x W 200 / 155 mm Flat grinding table 460 x 150 mm Suction connection of 100 mm Engine power S1 100% 2.1 / 2.8 kW Motor recording power S6 40% 2.8 / 3.6 kW Voltage 400 V Credpfx Ajd Rw Rhed Nob Length 1080 mm Width 520 mm Height 1000 mm Weight approx. 85 kg

Condition: new, Ostas 3 rolls round bending machine SMR-S 1070 x 150 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1070 mm Codpfx Asiw D Ecjd Norb sheet thickness 8,0 mm max. sheet thickness 7,0 mm bending roll length 1070 mm smallest diameter 225 mm roll diameter 150 mm weight 1400 kg dimension L-W-H 2600 x 630 x 1020 mm motor 4,5 KW Equipment: upper and lower roll electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line, CE-sign values apply to St-37 / 240 N/mm²

Condition: excellent (used), Year of construction: 2014, volume flow: 18.4 m³/h, operating pressure: 8 bar, BOGE S 150 screw compressor 110 KW engine Capacity 18.40 m3/min Pressure 8 bar Codjt Au Tbopfx Ad Njrb Year of production 2014 Mileage 18,000 hours THE COMPRESSOR IS FULLY FUNCTIONAL.

Condition: ready for operation (used), Year of construction: 2004, clamping force: 500 kN, screw diameter: 25 mm, opening stroke: 350 mm, For sale is an injection molding machine of the company Arburg and the type 320 S 500-150 The company from which this machine originates attaches great importance to maintenance. The order of the machine was terminated and no follow-up order was set, so this machine was removed from production. The pump has a slight lack of pressure but is functional Technical data: Year of construction: 2004 Clamping force: 500 kN Screw diameter: 25 mm approach force: 35 kN Opening force 120 kN opening stroke 350 mm clamping platen distance 575 mm Mold installation height 225 mm Csdpfxokwcyde Ad Nerb Prices plus value added tax Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: good (used), Year of construction: 1998, operating hours: 2,250 h, functionality: fully functional, machine/vehicle number: 174667, clamping force: 500 kN, overall weight: 21,300 kg, For sale is an Arburg 320 S 500-150 injection moulding machine. The unit is in good condition. Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500-150 Machine number (serial number): 174667 Year of manufacture: 1998 Clamping force: 500 kN Crsdpfsxvxrzox Ad Neb Voltage: 400 V 3∼ Frequency: 50 Hz Operating hours: 130,746 h Current (unknown): 0.3 A Connected load / Power (unknown): 1×15.00 kW Total weight (unknown): 21.3 t Transport and loading can be organised Europe-wide for an additional charge if required. Prices are excluding VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For more information or to contact us, please visit our website.

Condition: ready for operation (used), Year of construction: 2001, clamping force: 500 kN, injection pressure: 2.2 bar, For sale is an injection molding machine of the brand Arburg and the type 320 S 500-150 The machine is in working order Codeqmn Egopfx Ad Norb Technical data - Clamping force: 500 kN - Distance between the tie bars: 320 mm x 320 mm - Mold thickness: 225-350 mm - Clamping platen dimensions: 445 mm x 445 mm - Opening of the clamping platen: max. 550 mm - Screw diameter: 30 mm - Injection pressure: 2 200 bar - Weight: 2 250 kg On request, for an additional charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2017, condition: used, Leafy vegetable and herb slicer, 2 units available. When purchasing the complete set (2 units), the price is 12,000 euros net, non-negotiable. Codpjyktdvefx Ad Nsrb

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle Codjydc Evepfx Ad Nerb CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt grinding machine: Bernardo Type/Model: MS 150 x 2000 S-2 Condition: New belt dimensions: 150 x 2000 mm belt speed: 14,5 / 29 m/sec. contact wheel Ø x W: 200 / 155 mm surface grinding table: 460 x 150 mm suction connection Ø: 100 mm motor output power S1 100%: 2,1 / 2,8 kW motor input power S6 40%: 2,8 / 3,6 kW Voltage: 400 V length: 1080 mm width: 520 mm height: 1000 mm Weight approx.: 85 kg Features: - Standard with 2 speeds, optimal for grinding stainless steel. - Universally applicable for grinding of edges, surfaces and for cylindrical grinding - Graphite coating on the face grinding surface increases the sliding properties of the grinding belt - Constant belt tension due to spring-loaded tensioning device - User-friendly belt change, fast and uncomplicated - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Universally applicable for craft and industry Cedpfx Adob Hhh Dj Nerb - Large dimensioned plane grinding surface with protective cover - Including fine adjustment for parallel belt run Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate blanking switch - Base frame Special offer price ex stock Mindelheim, free loading. Art. 05-1249