Used Kao Ming Kmc-1800Dv for sale (112)

Condition: good (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,940 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, controller model: Heindenhain TNC 430, table load: 3,600 kg, rotational speed (min.): 120 rpm, rotational speed (max.): 12,000 rpm, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, number of slots in tool magazine: 32, Vertical Machining Center Kao Ming KMC-1800DV Year of manufacture: 2002 Control: Heidenhain TNC 43 Program runtime: 48,000 h Spindle runtime: 10 h The spindle was completely renewed recently. Invoice available. Technical Data Spindle speed: 120 - 12,000 rpm Drive power: 25 kW (40%) Tool holder: SK 40 Number of magazine places: 32 pcs. Hedpfow Hnuvsx Ac Nofh Travel paths: X-axis: 1,940 mm Y-axis: 1,200 mm Z-axis: 500 mm Table to spindle nose distance: 150 - 650 mm Accessories: - Chip conveyor - High-pressure coolant system with 40 bar - Heidenhain probe - Heidenhain tool length probe

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions Hfjdpoxf E Twefx Ac Nsh HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,750 mm, travel distance Y-axis: 1,870 mm, travel distance Z-axis: 700 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 1,650 mm, total width: 3,500 mm, spindle speed (max.): 6,000 rpm, total height: 3,500 mm, distance between stands: 2,300 mm, rotational speed (max.): 6,000 rpm, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, X-axis: 3.750 mm Y-axis: 1.870 mm Z-axis: 700 mm CNC Controller: Heidenhain iTNC 530 Spindle nose: ISO 50 Spindle speed: 6.000 Rpm Toolchanger: 30 pockets Table size: 4.000 x 1.650 mm Distance between columns: 2.100 mm Featured with: - Vertical milling head attachement - Touch probe - Cooling throught spindle - Double chip conveyor - Cooling unit - Machine manuals Country of origin: Taiwan Machine LxWxH: 9000 x 3500 x 4000 mm +/- Machine weight: 30.000 kg Hedpfx Aceyac T Ej Nsfh

Condition: good (used), travel distance X-axis: 1,940 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 700 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 15,000 rpm, table load: 3,500 kg, Machine is in good working condition. Parts shown by hand not come. Hodpfoylxg Esx Ac Nofh

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, controller model: HEIDENHAIN iTNC 435, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,230 mm Y-axis travel: 1,400 mm Z-axis travel: 850 mm Table dimensions: 2,000 mm × 1,250 mm Maximum table load: 6,000 kg Spindle speed: 6,000 rpm Hfedpfx Asy Dgy Ejc Neh Tool holder: SK50 Tool magazine capacity: 40 positions Rapid traverse in X / Y / Z directions: 12 m/min MACHINE DETAILS Control model: HEIDENHAIN iTNC 435 Spindle drive power: 38 kW Dimensions & Weight Dimensions (L × W × H): 6,135 mm × 4,338 mm × 4,150 mm Machine weight: 22,000 kg Operating hours (machine): 72,846 h Operating hours (program run): 48,891 h Operating hours (spindle running time): 47,512 h EQUIPMENT Coolant system Internal coolant supply (IKZ) Electronic handwheel Touch probe Automatic workpiece measurement Chip flushing Chip conveyor

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Hfedeykkhxepfx Ac Neh Weight: 3460kg

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Hjdpozavyfsfx Ac Njfh

Condition: good (used), Year of construction: 2013, functionality: fully functional, Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Platen size: 650 × 652 mm Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Injection weight (PS): Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Machine weight: 4500 kg. Hfjdpfx Aex Hibdsc Njh

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Hfodpfx Aou Rda Ioc Nsh Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Year of construction: 1998, condition: good (used), Part of an old direct extrusion line for pipes (which is also still available). This machine is supplied with the following components: - 4-component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control system for dosing and extruder - Single-circuit oil tempering - Maag melt pump Hjdpfxsx S Rims Ac Njfh

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Hsdpfx Acjxxmf Ie Nsfh Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 Hodpfxex Uym He Ac Nefh SCRAP WINDER Max. scrap roll diameter (mm) 600

Year of construction: 2022, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: OWD/492/2022, Equipment: CE marking, For sale is a used Metal Technika OWD-1600 4m optimizer with very low operating hours, approximately 2500 hours. The machine is connected and ready for trials and tests. Net price. TECHNICAL SPECIFICATIONS Performance From 3,200 to 8,250 m/8 hours. Electronics: Controller with a color touchscreen display "MITSHUBISHI". Functions - Full optimization of 30 dimensions in two quality classes, Hodpezdf Tpjfx Ac Nsfh - Creation of cutting programs for different customers, - Cutting at the marked location using a fluorescent pencil, - Trimming the margin (beginning and end of the input material) - Cutting in batches (several pieces at once) - Meters counters: total, change, operator, monthly, - Cutting accuracy ±0.3 mm. Engine: 7.5 KW (saw Ø500 – 140 teeth) Width of input material 12 - 250 mm max. width/height (250 / 50 mm) Height of input material 12 - 120 mm max. height/width (120 / 120 mm) Length of input material up to 4,200 mm. Lubrication: Oil-based central lubrication system. Output automation Connection for a conveyor belt and a sorting table.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, Chips and bark sorting screen, screening area 6,7 m2, el.motor 3 kW, capacity up to 150 m3/h, delivery includes metal frame. Hfsdpfewktyfex Ac Noh

Condition: used, Year of construction: 1989, x-travel 350 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 280 mm spindle taper SK 40 150 - 1660 U/min feeds 25 - 285 mm/min rapid traverse 1 m/min quill stroke 80 mm milling-head swivable +/- 45 ° total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with Hfsdpfx Acovzhido Nsh 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant

Condition: excellent (used), For sale: high-quality milling head from the renowned brand Walter – Xtra-tec® series, designed for precise roughing and semi-finishing of metals. Premium industrial tool, ideal for CNC machining centers and conventional milling machines. • Working diameter: Ø80 mm • Model: F4033.B27.080.Z07.06 • Mount: SK40 / ISO40 • System: Xtra-tec® • Number of insert pockets: 7 • High-quality build – German Walter precision • Applications: face milling, machining of steel, cast iron, alloys • Condition: used, very good technical condition, ready for work. This milling head delivers excellent performance and long service life – ideal for industrial, workshop, and production applications. Hfodjxlgniepfx Ac Neh

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Hjdpexcgygsfx Ac Nofh

Condition: refurbished (used), ROLLFORMING LINE Hodpfxsg Rkv Ej Ac Nefh

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS MADE IN ITALY Hjdpfx Acjfgl Aqe Nefh

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Hedpfjymzzusx Ac Nofh Width: 260 mm

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE Hfsdpfjymzxyox Ac Noh 9 STATIONS WIDTH: 450 mm

Condition: used, Year of construction: 1980, weight of the machine ca. 6 t Hfedsxzu Ayepfx Ac Neh

Condition: reconditioned (used), functionality: fully functional, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, HERMINGHAUSEN SR4 - OVERHAULED High-precision and conventional centerless grinding machine. The machine is suitable for grinding workpieces up to 125 mm diameter. High machine and grinding stability thanks to a robust cast bed and hydrodynamic segment jaw bearing. The low construction height ensures excellent accessibility to all important functions. Hfedpey Hf Dbefx Ac Noh The machine can be quickly and easily retooled for different workpieces and materials. Feed adjustment is performed with micron-level precision via coarse and fine adjustment. The grinding gap can be easily set by swiveling the bearing angle. Grinding wheel diameter: 500 mm x width 250 mm. The machine has been disassembled, defective parts replaced, repainted, and rebuilt. It is in very good mechanical and electrical condition and is immediately ready for operation. Commissioning and training/instruction on the machine and grinding technology is available.

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Hfedpfsunia Hox Ac Njh

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE Hfjdey Rxzhspfx Ac Nsh 11 STATIONS WIDTH: 450 mm FULL OVERHAUL