Used Klanke Bag Opener for sale (10,522)

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Codpfeyizxrex Ad Nsgt Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, BULK PRODUCTS BAGGING LINE PUDAS-50NB is designed for automated packaging of bulk products (type of peat, turf, pellets, sand or simillar) by weight • The process is managed via color Touch-screen, multilingual Menu. Cjdpei El Hrjfx Ad Nsgt • Suites for dosing into bags from 5 to 50 kg. • Capacity arround 3000 kg/hour. (depending on the product charactersitics and the size of the bags) operated by one person • Power supply 1ph., 230V, 3.2kW • Dimensions: L6.6m x W2.5m x H2.0m Made in Lithuania. CE certified.

Condition: new, Bag opener, for opening bags such as "yellow bags", etc. Can be used as a stand-alone device or as a system component in e.g. a sorting system. Throughput capacity: 6-7to/h Drive power: approx. 18kW dimensions: 8000x2350x2700mm Cgsdjdxwlzjpfx Ad Njt Weight: 11t Order goods Delivery time approx. 30 weeks further data and offer on request.

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering this used NEWTEC BAG PALLETIZING Chimpal 600 palletizer, year 2016. Manufacturer: NEWTEC BAG PALLETIZING Model: Chimpal 600 Serial number: A1607 Year of manufacture: 2016 Type: 600.S1000.G067.053.OR3 Description: Palletizing Equipment The system can also palletize Euro pallets 800x1200 mm or CP1 1000x1200 mm. Maximum bag weight: 50 kg Capacity: up to 500 bags per hour Including sheet dispenser The system is currently in operation and can be inspected under working conditions until it is dismantled in September/October 2026. Test palletizing is possible during the summer. Cgjdsyzzr Rspfx Ad Njt Newtec has been acquired by Haver & Böcker. Service for the palletizers is provided from Germany. A connected wrapper can be seen in the pictures, which is also for sale.

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Cgjdpfx Adetw Sm Ns Nst Feeding length: 2200mm Feeding height: 950mm (adjustable) Drive power: 0.18kW (Getriebebau Nord) Condition: slight paint wear, otherwise as good as new

Condition: new, Year of construction: 2025, We offer customized conveyor belt solutions, whether chain belt conveyors, apron conveyors, sliding belt conveyors as feeders for baling presses, shredders or as extensions for slitter rewinders. Csdpfx Adeq A S Evs Nogt Manufactured according to customer requirements, this is a sample offer.

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: Csdpfx Adjn I Rgps Njgt -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, Klanke roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Blade protection -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 1500mm Cutting channel opening: 1200mm Motor power: 7,5kW Cutting force: 30to Cgodpfx Adjn Hyxlj Njt Ordered goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, Roller splitter RGS20 Motor power 7.5kW Cutting force 20 tons Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm Cgsdpfoq A Turjx Ad Nst Machine weight approx. 2500kg Tank capacity approx. 100 liters -Body color RAL according to customer requirements Protective grille/blade bar RAL 1028 melon yellow Ordered goods Price and further information on request

Condition: new, Roll splitter for shredding waste rolls of paper and film - motor power 9kW - PLC-based control, two-hand safety circuit D2h9jg7 - Cutting force 35to - Splitting table straight version Codpfx Aetvgzbed Negt - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm - Machine weight approx. 4 tons -Color RAL 5012 - light blue - Hand protection grille in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Stock item - immediately available

Condition: new, Bunker conveyor suitable for the feeding of presses, shredding, etc.. Delivery throughout Europe possible. Cjdpfx Ajdxwlqjd Negt Technical data: POS. 1 feed hopper POS. Task 2, vol. 1, 5kW, conveyor width: 1100 mm, axis dimensions: 3500 mm POS. Platform 3, volume 1, 1kW, conveyor width: 1100 mm, axle size: 4700 mm Standard discharge height: 2800 mm (greater than possible with distance feet as shown on the illustration) Ordering goods Further information and data upon request

Condition: new, - Engine power 7,5kW - cutting force 20to Cutting channel designed for Codpjftnt Njfx Ad Nsgt - max. roll length 1100mm - max. roll diameter 900mm - machine weight approx. 2500kg - tank capacity approx.100Liter - hand guard in the area of the control panel and opposite to it -colouring of body RAL according to customer's request protective grid/knife bar RAL 1028 melon yellow Ordered goods Price and further information on request

Condition: new, - Motor power 7.5 kW - Cutting force 25 tons Cutting channel designed for: - Max. roll length 1500 mm - Max. roll diameter 800 mm - Machine weight approx. 3000 kg - Tank capacity approx. 110 liters - Hand guard grille in the control panel area and opposite - Straight version of splitting table - Documentation in German (2x: 1x in text form, 1x on CD) - Colour scheme RAL 5012 – light blue Protective grille/knife beam RAL 1028 melon yellow Machine in stock – immediately available Cedpfjd Tfzdsx Ad Njgt Price and further information upon request.

Condition: new, Container filling system / conveyor belt system Rotating tower with horizontally rotatable and longitudinally movable conveyor belt on stable galvanized frame, rotatably mounted. Incl. conveyor belt and high belt for automatic filling of three large capacity containers. SPS control distribution belt gear motor 2,2kW / conveyor width 900mm axis distance 5500mm Cgedpfxeb Sp D Rj Ad Nst drive slewing ring 0,6kW Rotation drive +/- 90 Conveyor belt conveyor width 600mm / centre distance 4000mm / drive 1,1kW High belt conveyor conveyor width 600mm / centre distance 4700mm / drive 1,1kW Colouring according to customer requirements Ordered goods Price and further information on request

Condition: new, - Motor power 15kW - Control SPS supported, with two-hand safety circuit - cutting force 50to - idle speed ca.22,3 mm/sec - Splitting table straight design - cutting channel: - max. length ca.3000mm Csdpfjfbx Nbox Ad Nsgt - max. opening ca.1250mm - machine weight ca.4,8to goods to order price and further information on request

Condition: new, For splitting and shredding wound paper, cardboard, or plastic rolls on cores. - Motor power 7.5 kW / 32 amps / 5-pole – 50 Hz-3LNPE - PLC-based control with two-hand safety switch - Cutting force 30 tons - Cutting speed 17.3 mm/sec Cutting channel designed for: - Max. roll length 1500 mm Cgedsf S Ir Uopfx Ad Njt - Max. roll diameter 1200 mm - Machine weight approx. 3000 kg - Color RAL 5012 - light blue Further information and price upon request Order item

Condition: new, Year of construction: 2025, - Motor power: 7.5 kW - Cutting force: 25 tons Cutting channel designed for: - max. roll length: 1,500 mm - max. roll diameter: 800 mm - Machine weight: approx. 3,000 kg Cjdpfstvmw Dsx Ad Negt - Tank capacity: approx. 110 liters - Hand protection grille at the operator control panel and opposite side - Splitting table, straight design - Documentation: 2 copies in German (1x text format, 1x CD) - Color: RAL 5012 – light blue Protection grille/knife beam: RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Condition: new, - Motor power 9 kW - PLC-controlled, two-hand safety operation - Cutting force 35 tons - Straight splitter table - Cutting channel: - max. blade length L = 2000 mm - max. opening H = 1200 mm - Machine weight approx. 4 tons Cgjdpegl Ac Sefx Ad Nst - Color RAL 5012 – light blue - Hand guard mesh at the control panel area and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request

Condition: new, - Motor power 9kW - PLC-based control, two-hand safety circuit - Cutting force 35to - Splitting table straight design - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm Bednmofn0d - Machine weight approx. 4 tons - Hand guard in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Ordered goods Cgsdpfx Adstvm A Te Nst Price and further information on request

Condition: new, Year of construction: 2025, Motor power 7.5 kW - Cutting force 30 t Cutting channel designed for - max. roll length 1500 mm - max. roll diameter 1250 mm Cgedpfjltmi Ssx Ad Not - Machine weight approx. 3800 kg - Tank capacity approx. 110 litres - Hand protection guard in the area of the control panel and opposite - Knife locking mechanism - Splitting table, straight design - Documentation supplied twice in German (1x printed, 1x USB) - Colour: RAL 5012 - light blue Protective guard/knife beam RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Condition: new, Year of construction: 2025, Engine power 7,5kW Cedpfx Aegl Adzed Njgt - Cutting force 30to Cutting channel designed for - max. roll length 1500mm - max. roll diameter 850mm - machine weight approx. 3500kg - tank capacity approx.110liter - hand guard in the area of the control panel and opposite to it -knife lock -splitter table straight execution -documentation 2-fold German ( 1x text form, 1x CD ) -color RAL 5012 - light blue protective grid/knife bar RAL 1028 melon yellow machine in stock and immediately available Price and further info on request

Condition: good (used), functionality: fully functional, Roll slitter type RGS50 – used Condition: good Cedpfx Adeyn Aghj Negt For splitting and crushing wound paper, cardboard, or plastic rolls on cardboard cores - Motor power: 15kW / dual pump 32A / 5-pole – 50Hz-3LNPE - Control: PLC-based, with two-hand safety control - Cutting force: 2x 25t - Blade length: 2500 mm - Max. opening: 1600 mm With roll support stand for increased working height and single-sided roll discharge – roll feed height approx. 1400 mm Factory inspection performed before delivery

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Cedpoyq Tb Ijfx Ad Nogt Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, Gutenberg MASTER BAG 300X (2026) – High-Speed Square Bottom Paper Bag Machine Boost your production with the MASTER BAG 300X, a next-generation roll-fed paper bag machine engineered for industrial manufacturers producing eco-friendly packaging at scale. Built for reliability, precision, and speed, this fully servo-driven system is ideal for producers replacing plastic packaging with sustainable kraft paper solutions. Built for Industrial Paper Bag Production The MASTER BAG 300X is designed for continuous, high-volume manufacturing of square bottom paper bags without handles. Its fully automated workflow ensures consistent quality while reducing labor and material waste. Why manufacturers choose this model Fully automatic roll-fed production High output up to 220 bags per minute Flexible bag size range for multiple markets Servo-driven precision and stable operation CE-certified for global compliance This machine is perfect for companies expanding into sustainable packaging. Precision Engineering & Automation The 2026 model integrates YASKAWA servo technology and a modern control system that automates the full production cycle: • Automatic paper feeding and tension control • Tube forming and precise cutting • Bottom folding and gluing • Automatic stacking and counting • Multilingual HMI touchscreen for easy operation The result: high efficiency, low waste, and consistent bag quality. Technical Specifications (2026 Model) Bag Format Range Bag Length: 280 – 530 mm Bag Width: 150 – 330 mm Bottom Width (Gusset): 70 – 180 mm Material Compatibility Paper Thickness: 60 – 150 gsm Paper Roll Width: 470 – 1050 mm Max Roll Diameter: 1500 mm Core Diameter: 76 mm Performance Maximum Speed: Up to 220 bags/min Installed Power: 8 kW Power Supply: 380V / 3-phase / 50Hz Compressed Air: 6–8 bar Machine Data Weight: 8,000 kg Dimensions: 9500 × 2600 × 1900 mm Advanced Features ✔ Fully servo-driven YASKAWA system ✔ Photoelectric cutting length control ✔ Inline gluing and bottom forming ✔ Automatic stacking and counting ✔ Supports printed, unprinted, and PE-coated papers ✔ Optional inline flexographic printing unit available ✔ CE certification for EU and global markets Designed for Multiple Industries The MASTER BAG 300X enables manufacturers to supply a wide range of markets: Food & Dry Goods Flour, sugar, rice, pasta, grains, baking mixes Coffee, tea, spices, lentils, nuts, dried fruits Bakery & Takeaway Bread bags, pastries, cookies, fast-food packaging Retail & E-commerce Grocery stores, organic shops, takeaway and boutique bags Agriculture & Pet Food Seeds, fertilizer, animal feed, eco pet food packaging Cedjwzm I Rspfx Ad Njgt Pharma & Herbal Powders, supplements, herbal products DIY & Hardware Screws, tools, small parts packaging A Sustainable Production Investment The MASTER BAG 300X is a powerful solution for manufacturers transitioning to plastic-free packaging while increasing capacity and profitability. Reliable, efficient, and built for long-term production — the MASTER BAG 300X is a smart investment for the future of paper packaging. Contact us today for pricing, configuration options, and delivery availability.

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Codpfoyr Awbex Ad Negt Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.