Used Klimawent Filtration And Ventilation Unit Ufo-4-M/N for sale (115,856)

Year of construction: 2015, condition: used, functionality: fully functional, We have a used UFO-4-M/N-2 filter ventilation unit by Klimawent for sale – a stationary dust collector designed for air purification from dust and fumes. Device parameters: a. UFO-4-M/N-2 filter ventilation unit b. 3 hoods, 3000x1500 mm c. Ductwork installation Hnjdpfx Ahozl Al Dezsp d. Installation capacity: 10800 m3/h Very good condition, fully functional, lightly used. Local pickup only.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. Hsdpfx Ahsfdkb Tszjnp The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Hnjded Tbbdopfx Ahzjp - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Hnsdpfsd Tqalsx Ahzep Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) Hnjdpfjfdkb Usx Ahzop - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Hnodpfx Aeguk A Hehzjp Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. Hnedpfx Ahoguk Dkszop The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time Hnsdpfefdkbhjx Ahzjp - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized Hodeguk Dvjpfx Ahzsnp - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: used, Year of construction: 1999, Technical details: x-travel: 690 mm y-travel: 400 mm z-travel: 550 mm B-axis (table): 360° mm control: Siemens 840 D number of spindle speeds: max. 15 000 U/min tool clamping: System nach DIN 69893 tool taper: HSK-A63 tool changer magazine: chain magazine: 12 places Stück traversing speed: x/y/z Axis: 40 total power requirement: 195 kW weight of the machine ca.: 13,0 t Traveling Column Milling Machine - the tool changing unit consist of 3 -NC axis and 1 NC- rotary table axis - ATC ( with magazine) - rotary table Type SKH-NC 4/029, diameter=460mm , table surface plate Ø 500 x20mm, revolution per minute max. 22 rpm - control panel SIEMENS - Spindel-Typ: DRF-WE-255-N-W-15-30, 15000 U/min., Spindelleistung = 30 kW - chip conveyor Make Knoll type 400K-3/280, ejection height 1150mm - cooling system for spindle make SCHIMBKE Type DK 80V, 3,36 kW i.D. Hnsdpfx Aeu Idl Sohzsp *

Year of construction: 1985, condition: excellent (used), machine/vehicle number: AV, 1 Demag / AV Auguste Victoria Pillar Crane 500 KG payload / lifting load Crane is about 10x available. Outreach 4-5m, 500 KG payload. Also available with 2 outriggers !!!!! PLEASE INQUIRE - pictures by email Technical specifications : Payload at full reach max 500 KG / 0.5 to Overall height 4.5m, outreach 4-5m, boom 3,7m, hook height 3m Weight completely approx. 1400 Kg with 500KG Demag PK2 / PK5 (1000Kg) chain hoist, 500V Year of construction approx. 1980-1995 Complete with pillar, outrigger, chain hoist, cable tow, landing gear and small parts Swivel range approx. 270 ° Item location is 75053 Gondelsheim Plant is completely dismantled and immediately available See pictures Shipping by forwarding or pickup Hnodpfx Ahed Dfp Tozep Please ask for shipping costs by postal code

Year of construction: 1979, condition: excellent (used), machine/vehicle number: Kran, 25 Abus pillar jib cranes 250 500 1000KG payload available, length 4m Please inquire with exact dimensions such as overhangs, overall height, payload etc It is offered: 1x ABUS VS pillar jib crane jib crane chain hoist crane slewing crane 500KG 0.5t 6m PB7 (Picture 1-6) Technical specifications: 1 ABUS VS pillar jib crane 500 KG payload / lifting load Payload with full reach 500 KG / 0.5to Height: approx 3.9m Outreach: approx. 4 m, hook height: approx. 3 m dowel plate 140x140cm (approx 950KG) Weight completely approx. 1750 kg with Demag chain hoist Connection to 400V 360 ° swivel range The item location is 75053 Gondelsheim Only the offered crane system shown in the pictures is sold See pictures Hodpofi U E Defx Ahzjnp Shipping by carrier or pickup Feedback geben Verlauf Gespeichert Community

Condition: used, mileage: 403,000 km, power: 243 kW (330.39 HP), first registration: 11/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro5, loading space length: 7,676 mm, loading space width: 2,528 mm, loading space height: 2,696 mm, Year of construction: 2012, Equipment: air conditioning, Manufacturer Volvo Model FM 330 4x2 7,7 m Curtainsider and Taillift Year 2012 Condition Good Serial Number YV2J1D1A4DA736557 Ref. nr. 1508060 Reg. date: 16-11-2012 Last seen: 18-11-2025 Hk: 330 Km: 403000 Gearbox: I-shift Eurotype: 5 Diesel tank: 1 Tank liter: 530 Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: VEB Tire Size: 315/70R22,5 - 315/70R22,5 Hodpfx Ahox R Rn Hozsnp Front suspension: Air Suspension rear: Air Wheelbase: 5600 mm Toolbox: ? Total weight: 18000 Kg Net weight: 9150 Kg Load capacity 8850 Kg Inside length: 7676 mm Internal width: 2528 mm Interior height: 2696 mm Lift Brand: Zepro Lift capacity: 2500 Kg

Condition: ready for operation (used), Siemens Teleperm M 6DS1330-8BA connection module E, version 4, SN 00349928, used, 100% functional Hjdpexahwujfx Ahzonp

Condition: used, Bakery oven with 4 levels and a fermentation chamber Manufacturer: Wiesheu External dimensions: 95x140x210cm Internal dimensions: 60x80cm Capacity: 8 trays (2x4) Electric power: 4.85kW Hnsdpfx Aouualtshzjp Voltage: 400V 50Hz

Condition: used, mileage: 419,200 km, power: 175 kW (237.93 HP), first registration: 06/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 3,780 mm, Year of construction: 2013, Equipment: air conditioning, parking heater, tail-lift, * Mercedes Benz 1824 L AXOR with box body 7.90 m & BÄR tail lift 2 t * Diesel – Displacement: 6,374 cc – 175 kW / 240 hp – Euro 5 – Green environmental badge * Body dimensions: Length 7.90 m x Width 2.60 m x Height 2.50 m – Wheelbase: 4,900 mm * 2 seats – Automatic transmission – Air conditioning – Suspension: leaf/air – Axle configuration: 4x2 * Retarder – Permissible gross weight: 18,000 kg – Curb weight: 10,550 kg – Payload: 7,450 kg Hjdpfjy Ng Imex Ahzsnp * Truck 1: 1824 L – First registration – mileage: 400,500 km – VIN: WDB 9505361L652633 * Truck 2: 1824 L – First registration – mileage: 513,750 km – VIN: WDB 9505361L752647 * Truck 3: 1824 L – First registration – mileage: 422,750 km – VIN: WDB 9505361L756551 * Truck 4: 1824 L – First registration – mileage: 419,250 km – VIN: WDB 9505361B980262 * Vehicles available immediately and ready for collection – Vehicles are not branded * Further images available on request or will be provided after the Easter holidays * We also have 4 Mercedes Benz Axor 1824 refrigerated box trucks from registration years 2012/2013/2014 * Please arrange a viewing appointment – Price is per vehicle * Contact: Mr. Andreas Vogel * The information given online constitutes a non-binding description. * They do not represent guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors, and prior sale. Special Equipment: Wheel bolt covers, engine tunnel storage, tow hitch: towing coupling, audio system: CD radio, 220 Ah battery, aluminium air reservoir, cab: comfort suspension (1.8 HZ), cab version: S (short cab with rear wall extension), 100 A alternator, graphic info display with econo-meter, tail lights for tail lift mounting, heated air dryer single chamber, side-mounted spare wheel winch, tail lift switch, circuit breaker, driver’s seat: comfort air-suspended seat including horizontal suspension, voltage converter 24V/12V 15A, steel rims 9.00x22.5, 12V socket, 24V socket in cab, front underrun protection, pre-installation for cool box/fridge, preparation for telephone/fax, cranked front axle, heat-insulating glass, auxiliary heater (air) Further Features: Emission standard EURO 5, axle configuration: 4x2, front axle load 7.5 t, electrically adjustable and heated external mirrors, electrically adjustable mirror, left, outside temperature display, long-distance cab cockpit, steel roof hatch, rear axle differential lock, cab: S (short), suspension: leaf/air, electric window lifters, 6-speed transmission – type: G 85-6, urea tank (AdBlue): 95 litres, rear axle H 6, crown wheel 440, interior filter: pollen filter, body/chassis: chassis, fuel tank: 210 litre plastic, Axor 2 model update, engine 6.4 L – 175 kW diesel (OM 906 LA), engine start/stop system, constant throttle engine brake, spare wheel under end of frame, disc brakes, passenger seat: rigid single seat, rear axle stabiliser, front axle stabiliser, Telligent braking system with ABS+ASR, fixed rear underrun protection, immobiliser, permissible gross weight 18 t

Condition: new, Year of construction: 2025, power: 55 kW (74.78 HP), fuel type: diesel, Family name: PKBXL03.3E1D Approximate weight in kg: 354 kg Hodpfxoy Anake Ahzenp Dimensions LxWxH: 100 x 80 x 110 cm

Year of construction: 2025, condition: used, New: Yes Hnjdpoy Am U Tjfx Ahzjp Power: 6 kW (8 HP)

Condition: excellent (used), functionality: fully functional, HEIDELBERG NUMBERING AND PERFORATING UNIT FOR HEIDELBERG SM 52 Hedpjvb Hxdjfx Ahzonp

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE //// Hnjdpfjwg R I Esx Ahzep

Condition: new, functionality: fully functional, empty load weight: 144 kg, maximum load weight: 606 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, color: grey, Year of construction: 2024, operation weight: 750 kg, B Führerschein Anhänger GARDEN TRAILER 264 KIPP mit Bordwandaufsatz [zusätzliche 40 cm] und Stützrad Ersatzrad mit Halterung optional Art der Aufhängung ungebremste Achse bis 750 kg Gesamtabmessungen: 3541 mm (Länge) x 1690 mm (Breite) Bordwände Stahl Tragrahmen aus feuerverzinktem Stahlblech Art der Ladefläche aus Siebdruckbodenplatte Verwendung: Umzüge, innerbetrieblicher Warentransport Der Anhänger verfügt außerdem über den Kippmechanismus, mit dem praktisch alle Ladungen blitzschnell be- und entladen werden können. Sehr große Transportfläche, die den Transport von großen Waren erleichtert Überdurchschnittliche Festigkeit mit zusätzlichen Stützbalken unter der Ladefläche Umrissleuchte, die beim Rückwärtsfahren von größer Bedeutung sind Korrosionsbeständige und sehr robuste Kotflügel Hodpfjuih Hgox Ahzjnp Die Möglichkeit, den Anhänger auf die Heckklappe zu legen [so stellt man sicher, dass der Anhänger wenig Platz einnimmt]. Die Räder wurden bei diesem Modell seitlich montiert (und nicht unter der Ladefläche), was eine sehr bequeme Lösung beim Fahren ohne Ladung darstellt BORDWÄNDE: alle Bordwände wurden aus verzinktem Stahl hergestellt Hintere Bordwand aufklappbar und komplett demontierbar 70 cm hoch [Standardbordwände, die 30 cm hoch sind und Bordwandaufsatz - zusätzliche 40 cm]. Wir bereiten die notwendigen Dokumente für Sie vor, die Sie für die sofortige Anmeldung benötigen, d.h.. Rechnung, EG-Übereinstimmungsbescheinigung, Fahrzeugbrief, Gewährleistungsbuch (2 Jahre Garantie) und unser Zertifikat.

Condition: used, Year of construction: 2003, machine/vehicle number: 95240126, travel distance X-axis: 4,870 mm, travel distance Y-axis: 1,840 mm, travel distance Z-axis: 250 mm, working width: 1,300 mm, working length: 4,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 4 Travel range X-axis: 4,870 mm Travel range Y-axis: 1,840 mm Travel range Z-axis: 250 mm Travel range C-axis: 360° Maximum axis speed X: 85 m/min Maximum axis speed Y: 85 m/min Maximum axis speed Z: 25 m/min Working area: 4,200 x 1,300 mm Spindle power: 9 kW (12 hp) Maximum spindle rotation speed: 18,000 rpm Spindle interface: HSK63F Number of tool changer positions on the head: 8 Number of tool changer positions on the Y-axis: 15 MACHINE DETAILS Power of the independent swivel spindle: 3 kW (4 hp) Power of the independent horizontal motor: 5.6 kW (7.6 hp) Hedpszi A E Ejfx Ahzonp Maximum speed of the horizontal motor: 18,000 rpm Drilling unit motor power: 3 kW (4 hp) Suction capacity of the vacuum pump: 100 m³/h Dimensions & Weight Dimensions of the installed machine (L x W x H): 7,500 x 3,800 x 2,350 mm Overall dimensions for transport (L x W x H): 13,500 x 2,400 x 2,400 mm Total weight: 5,000 kg EQUIPMENT 6 suction bars, each with 3 suction cups 4 panel lifting bars 6+2 reference stops 6 lockable clamping devices Dot laser HSK63F tool holder (2 pieces) TPA Albatros CNC control system (updated in 2018) with remote control Automatic central lubrication Front safety mats + perimeter guardrails User manuals + electrical diagram + CE certificate

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: S/N69515, Sheet Wizard 1650 (4 roll stand) The SheetWizard 1650 dual rotary sheeter is engineered to accommodate a variety of application requirements. This versatile and standardized sheeter features dual rotary knife technology, providing exceptional cut quality for materials up to 1000 gsm. The machine is capable of operating at a maximum speed of 335 meters per minute (1100 feet per minute). Hodpsy Uffbefx Ahzonp Unwind System Four shaftless floor pickup unwinds are designed to handle rolls with a diameter of up to 73 inches. The system supports core sizes ranging from 3 inches up to 12 inches, ensuring flexibility for different roll specifications. Decurling and Tension Control Each unwind is equipped with overhead decurler and tension controls, maintaining optimal sheet flatness and consistent tension throughout the process. Alignment and Splice Management The machine incorporates FIFE alignment technology and a splice sensor detector, which automatically discards joined sections to ensure product integrity and continuous operation. Slitting Capabilities The SheetWizard includes a single set of three slitters, capable of cutting up to 600 grams. This arrangement allows for efficient slitting and high throughput.

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. Hnjdpfx Ahjnp Iywjzsp good working condition

Condition: new, Year of construction: 2024, fuel type: diesel, power: 74 kW (100.61 HP), fork length: 1,200 mm, color: red, Lifting capacity: 4,000 kg. Hedsvz Uckepfx Ahzjnp Maximum lifting height: 17.55 m. Maximum forward reach: 13.08 m. Unladen weight: 12,560 kg Forks: 1,200 mm. Controls: JSM Joystick Only for export outside the EU. = More information = Transmission: Torque converter Year of manufacture: 2024 Lifting capacity: 4,000 kg