Used Knoll 750 K - 1 for sale (93,321)

Year of construction: 1989, condition: used, length in total ca. 3500 mm band width ca. 700 mm Fjdpfsra Rrtox Akhsgf conveying height ca. 1200 ejection height approx. 1200 mm weight ca. 800 kg dimensions of the machine ca. ca. 3500 x 1300 x 1650 m

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump Fsdophvl Tspfx Akhegf - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: new, functionality: fully functional, empty load weight: 121 kg, maximum load weight: 629 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 200 mm, loading space width: 1,260 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Saris EA 201 126 750 1 NEW VEHICLE Internal dimensions: 200cm x 126cm Total weight: 750 Kg Payload: 629 Kg Side board height: 30cm Unbraked, single-axle flatbed trailer Tilting loading platform Side boards made of galvanized sheet steel Rear side board foldable and removable Bolted and galvanized steel frame Screen-printed plywood floor 13-pin electrical system Rear lamps with reversing light NSL and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side boards - Aluminum cover with bracket for e.g. bicycle carrier - Flat cover with or without railing Fsdpfx Akjzl Dcqshsgf - High cover 80cm - Coarse or fine mesh net - Spare wheel with bracket - Loading ramps Further accessories available upon request! Images are for illustrative purposes and may show optional accessories that incur additional costs. Plus vehicle registration document and freight to Gera: €100 net. Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Specialist in axle repairs, including for caravans. Large selection of rental trailers. In addition, we have a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to us.

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm - Drilling depth: 750 mm - Filter Fgedpfx Ajxzz Hjkhjf - Pump

Condition: ready for operation (used), Coolant – Filter System KNOLL KF 600 / 1500 -CE marking -Coolant tank -Paper band filter -Control system – OP 3 -Coolant pumps -Electrical diagrams Dimensions: Fgjdsztyfdspfx Akhef L x W x H 2.4 x 1.2 x 1.5 meters / Weight 1200 kg Errors and omissions excepted.

Condition: ready for operation (used), Knoll KTS 25-38-F-G screw spindle pump, 200725147, serial number: 333422, used, in like-new condition, 100% functional, scope of delivery as shown in the photos. Fgsdpfx Aozp Az Hokhjf

Condition: ready for operation (used), Knoll TSK40-21/30558 pump, part number 200511775, serial number 271359, with AM 100L AA2 motor, serial number 491439, used, in like-new condition, 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Fjdpfjzpcwhox Akhegf

Condition: ready for operation (used), KNOLL TS40-21/30 586 Centrifugal pump, 200318477, serial number: 210926, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgjdpezh Sc Djfx Akhjf

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. Fsdpfxozty U Eo Akhjgf - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: used, maximum load weight: 11,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: tail-lift, 2-AXLE DRACO FRIGO TRAILER, CARRIER TRS ICELAND, 24 CC, TAIL LIFT (2021) Box: Cool/Freeze/Flowers Frigo Martini Ebo Rhoon Make and type of chassis: Draco MZS 218 Refrigeration: Carrier TRS Iceland First registration: APK: ? 2025 FRC ATP: No Inside dimensions (lxbxh): 750 x 250 x 290 cm Drawbar adjustable length: 40 cm Empty weight: 6,090 kg Loading capacity: 11,910 kg GVW: 18,000 kg Lift: Dhollandia 2,000 kg lift Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre tread depth axle 1: L30%, R30% Tyre tread depth axle 2: L30%, R30% Spare tyre trailer 445/45 30% Fgodpeztlkrjfx Akhef Extras: Length-adjustable drawbar (40 cm), Carrier TRS Iceland refrigeration, Dhollandia 2,000 kg lift (Year of manufacture 2021!!), ABS, EBS, SAF axles with disc brakes, 2 toolboxes, Fully insulated box built by Martini, 5x stainless steel rails in floor and ceiling, 1x horizontal load securing rail, extra lights, rear doors, rear bumper, ferry connections, 2x spare tyres, complete service history available, directly available and ready for work. The box is large enough for 24 CC (Danish trolleys), 14 standard pallets, or 18 Euro pallets, etc. Further information: * Type | Front axle: Continental * Tyre size | Front axle: 445/45 R19.5 * Tyre tread depth inside left | Front axle: 20% * Tyre tread depth inside right | Front axle: 20% * Maximum axle load | Front axle: 9,000 kg * Type | Rear axle: Continental * Tyre size | Rear axle: 445/45 R19.5 * Tyre tread depth inside left | Rear axle: 40% * Tyre tread depth inside right | Rear axle: 40% * Maximum axle load | Rear axle: 9,000 kg * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2,000 kg * Price on request: Yes * Position | Front axle: Rear * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Air suspension * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Tail lift | Type: Tilting and sliding tail lift Further equipment: * Rear doors * Homepage * SemCollection Semtrade B.V. Contact: Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs: Please inquire in advance about the costs and procedures for your respective country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany Fodpfx Akezrvdtohjgf - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: ready for operation (used), Year of construction: 2001, total length: 3,600 mm, total height: 1,300 mm, conveyor belt width: 320 mm, delivery head: 1,000 mm, ejection height: 1,000 mm, conveying length: 1,900 mm, conveyor belt length: 1,900 mm, installation height: 180 mm, Knoll 240 S-1 chip conveyor for sale Good condition. Installation width: 320 mm Conveyor belt length up to discharge: 1900 mm Conveyor height: 180 mm Fsdpfxeyxxf Ne Akhjgf If you have any further questions, we are at your disposal.

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Fgjdpek Abazsfx Akhef Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optional Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support feet and Lateral guides on both sides optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Fgsdok Abcgopfx Akhef With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm Frame width (NB): 750 mm belt width (GuB): 550 mm Fjdpek Abcrefx Akhegf height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Fodpfxsx Thzpe Akhsgf Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Fgjdpfsx Avhyox Akhsf Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Condition: new, Siemens 1LA7130-2AA11 motor, serial number: UD, IP 55, 132S, IM B5, 50 Hz, 230/400 V, 60 Hz, 460 V, with Knoll KTS 32-48-T pump, serial number: 269387, with Coax 3-HPB-S 15 RB 15 210/0BD 24P valve 64 526094, Emulsion G 10/0´´, 24V DC, 0-64 bar, 175743-01, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgsdpfx Akozmlzqehef

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock Fgedpfxsizw E As Akhjf cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Type: KM180-750 AX All Electric Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: 👉 Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts. Key features: * Solid and durable construction for long-term operation * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial use Fedpfew E E Evox Akhsgf * Good availability of spare parts The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times. Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production. The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.

Condition: used, machine/vehicle number: 731, Heftköpfe für Sammelhefter - Stitching heads for Saddle Stitcher Polygraph Heftköpfe 731 - 745 - 750Serial-No. 731-745-750 Fgsdoh Ax R Rspfx Akhsf Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, injection weight: 289 g, Year of manufacture: 2005 Operating hours: 80,228 h Clamping force: 160 tons Distance between tie bars: 520 x 520 mm Screw diameter: 45 mm Injection volume: 318 ccm Injection weight: 289 g for PS Fgodpjzkqf Aofx Akhjf Equipment: Krauss Maffei robot, core pull, Euromap, 3 additional injection units

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request Fgsdpfozc Nwpjx Akhjf

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, excavator cylinders -Manufacturer: O&K, hydraulic cylinder with control valve stroke 470 mm -Type designation: 1 713 351 1554 541 -Piston rod: Ø 70 mm Fgjdpfx Akjt H Tqmehof -Hole diameter 120/60 mm, hole spacing 970/1440 mm -Dimensions: 1160/390/H230 mm -Weight: 99 kg

Condition: used, mileage: 442,914 km, power: 552 kW (750.51 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Volvo FH 16-750 4x2 Globetrotter XL, semi-trailer tractor VIN: B431968 Chassis / Components: * Wheelbase: 3800 mm * Leaf / Air suspension * Tires: Front: 385/65 R.22.5, Rear: 315/70 R.22.5 * Remaining tread depth: Front: ~80%, Rear: 10/20% * 2 x Aluminum fuel tanks * 1 x AD-Blue tank Cab: * Globetrotter XL * 2 x Beds * Built-in cabinets on the rear wall of the cab * Leather seats / Leather steering wheel * Refrigerator * Automatic climate control * I-PARK COOL * Stationary air conditioning * Auxiliary heater * Volvo radio * Aux, USB, BT * Navigation system Fgsdpfezig Svox Akhef * Emergency braking assist * ACC = Adaptive Cruise Control * Lane keeping assist * DAB = Driver Alert System * Side camera * Sunroof // Sliding roof, electric Engine / Transmission: * 16.123 cc // 750 hp / 552 kW // EURO 6e * Retarder * I-Shift / Automatic * Differential lock Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 8,933 kg * Payload: 9,067 kg Other: * German vehicle * 1 previous owner * New MOT (technical inspection) possible. ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typographical errors, changes, prior sale, and errors. Subject to change! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Through our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly help you in organizing special transports. Temporary license plates / Export license plates We will gladly help you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly help you in handling customs matters.