Used Knoll Fka/Vrf 300 for sale (12,643)

Condition: good (used), Year of construction: 2012, Cooling/filter installation with vacuum filter Function: A vacuum pump directly connected to the filter drum's inner chamber draws the medium into the drum. During this process, contaminants are retained on the filter drum’s surface by a fine-mesh fabric. The vacuum increases due to the resistance caused by the accumulating filter cake. When a preset negative pressure is reached, the drum is automatically rinsed. Fgjdpfxsxrnvuo Ad Nob An installed scraper chain removes the sludge. The system can be controlled either via a PLC controller or directly from the processing machine.

Condition: ready for operation (used), Year of construction: 2013, An oil coolant system including an HSS recirculating cooling system is available. Total capacity: 5800 l, flow rate emulsion/oil: 1000/500 l/min, max. delivery pressure: 150 bar. Pumped liquid temperature: 80 °C, flow rate suction line/pressure line: 1m/s / 3m/s. Dimensions: Length 3200 mm, width 2120 mm, height 2735 mm. Accessories: Water cooler HSS type: DKB1000. Regularly serviced, with documentation. On-site inspection is possible. Fgjdsrza N Ijpfx Ad Njb

Condition: used, Emulsion treatment system with chip conveyor, Emulsion filter, VRF 450/2100 R, Used machine Manufacturer: KNOLL Type: VRF 450/2100 R Overall dimensions: Width: 2980 mm Depth: 1700 mm Height: 2840 mm Fgsdpfex Ttw Nsx Ad Neb Year of manufacture: 2002 Electrical data: 400 V Tank capacity: 2100 l Filtration capacity: 450 l/min

Condition: ready for operation (used), Emulsion Treatment System with Chip Conveyor,vacuum rotation filter KNOLL VRF 250, Used Machine Manufacturer: KNOLL Type: VRF 250 Overall dimensions: Width: 2300 mm Fjdjw T U Nrepfx Ad Nsgb Depth: 1860 mm Height: 2300 mm Weight: 1140 kg Year of manufacture: 2020 Electrical data: 400V; 14.64 kW Tank capacity: 1450 l Filter capacity: 250 l/min

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 Fgsdpfx Adsy Rkt Ns Njb - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. Fjdpfx Aey Rkhasd Njgb - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction • Manual slewing • Complete with trolley and cables ——— Fjdpfjw Rddysx Ad Njgb - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: used, Year of construction: 2017, overall weight: 315 kg, total length: 1,840 mm, total width: 1,180 mm, total height: 1,000 mm, VRF SYSTEM PANASONIC U14ME2E8 40 KW Cooling capacity: 40 kW (27/19°C - 35°C) Heating capacity: 45 kW (7/6°C - 20°C) Year of manufacture: 2017 Type of refrigerant: R410a Fgodpfoqz Ucijx Ad Nsb Number of fans: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Dimensions: 1.84 x 1.18 x 1.00 m Weight: 315 kg

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles Fgodpfxey Ilvge Ad Nsb • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation Fgodoy Drn Uepfx Ad Nsb - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW Fsdpfsyy Nd Eex Ad Nsgb - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: used, functionality: fully functional, ES-300 ASTD cutting machine – fixed bridge saw for cutting marble, granite, and ceramics, model ES-300 A with automatic X and Z axis movement, rear stop with handwheel, and 2 idle roller conveyors. Fgsdpfx Adey Dch Ej Nob

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. Fedpfoy A Ewtox Ad Nogb 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Year of construction: 1999, condition: ready for operation (used), Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible. Fgjdpjyypl Nsfx Ad Neb

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, mesh size: 50,100 mm, 300 x wire mesh decking for pallet racking (Euro pallets) approx. 88 cm x 110 cm, galvanized Fgodpfx Asyzb Acod Nob Load capacity 1,000 kg (with evenly distributed load) For beams 182.5 cm + 270 cm long with 4 cm beam thickness Shipping / Delivery: - max. 7 business days after receipt of payment - delivered free to site / installation location - Unloading from truck to be carried out by the buyer using their own lifting equipment - Deliveries within the entire territory of Germany, excluding islands! Deliveries to EU countries by individual arrangement.

Condition: ready for operation (used), Year of construction: 2001, total length: 3,600 mm, total height: 1,300 mm, conveyor belt width: 320 mm, delivery head: 1,000 mm, ejection height: 1,000 mm, conveying length: 1,900 mm, conveyor belt length: 1,900 mm, installation height: 180 mm, Knoll 240 S-1 chip conveyor for sale Good condition. Installation width: 320 mm Fgodpeyxxf Nefx Ad Neb Conveyor belt length up to discharge: 1900 mm Conveyor height: 180 mm If you have any further questions, we are at your disposal.

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, color: other, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm Fedpfxsy Dpl Ro Ad Njgb • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Fedpfxok E Dxks Ad Njgb Loading capacity depending on viscosity.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Fodpfxjd Tiu Eo Ad Negb Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Fgedophvl Topfx Ad Njb Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 319237, We are offering this very well maintained KNOLL KF 600/2000 coolant system with band filter, year of manufacture 2007. The unit is fully functional and has been operated with cutting oil. 2 new rolls with matching paper filters are included. Fgodpfx Adjyknkkj Njb Description Knoll coolant system with band filter Fully functional Previously used with cutting oil Includes 2 rolls of suitable paper filters

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Central plant Knoll Central plant for shavings / cutting fluid. Fgodpfx Adjtltcro Nob Can handle up to 10 machines at a time. Parts of the plant: Knoll FKA / 1820 Knoll AE 1114.800 Knoll VRF / 900 Dimensions approx: 400x400x330 cm

Condition: good (used), COOLANT FILTRATION SYSTEM Knoll KF 600 - 1500 - CE marking Fgedpeyir H Hjfx Ad Neb - Coolant tank - Paper band filter - OP-3 control unit - Coolant pumps - Electrical schematics Dimensions (LxWxH): 2.4x1.2x1.8 meters / Weight 1500 kg Errors and input mistakes excepted.

Condition: good (used), The scope of delivery includes: Fjdpfx Adei Enw Sj Nsgb 01x Shelf connector, used Manufacturer: Dexion type: P90 for shelf distance: approx. 300 mm total length: approx. 380 mm cross section: U 51 x 25 mm Material color: sendzimir galvanized Weight: 0,47 kg | pcs.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used for shelf distance: 300 mm Fgjdpfji Enyfsx Ad Neb profile dim.: U 50 x 40 mm Material color: blue Weight: 0,55 kg | pcs.