Used Komet Toolholder for sale (254)

Condition: used, Year of construction: 2019, operating hours: 19,020 h, functionality: fully functional, total length: 5,813 mm, total height: 3,111 mm, overall weight: 23,200 kg, total width: 2,925 mm, rotor length: 2,200 mm, number of blades: 84, # Lindner Komet 2200 HP – Year of Construction 2019 – 400 kW – approx. 19,020 operating hours For sale is a powerful and regularly maintained Lindner Komet 2200 HP secondary shredder, year of construction 2019, from our existing industrial waste processing plant. The machine was used for the secondary shredding of processed material for the production of substitute fuels (SFS) and was permanently integrated into our stationary production line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Komet 2200-1 HP - Year of Construction: 2019 - Operating Hours: approx. 19,020 h - Drive Power: 2 × 200 kW (400 kW) - Speed: 355 RPM - Operating Voltage: 400 V / 50 Hz - Cutting Unit: 172R - Screening Unit: DM 30 - Hydraulic feed system - Frequency-controlled drive - Siemens HMI touch panel, 15 inches - Freestanding hydraulic unit - Mechanical safety couplings - Mechanical central lubrication ### Equipment and Features Powerful belt drive with ABB asynchronous motors and frequency inverters to adjust the shredding performance to the respective material. Hydraulic feed system for controlled material feed, reusable replaceable knives, and hydraulically pivoting screening unit and stripping comb for maintenance work. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists with the manufacturer, Lindner Recyclingtech, for the Komet 2200 HP. In addition to the scheduled maintenance, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - 2025: Complete clutch replaced. - Regular rotor resurfacing: The rotor is completely resurfaced at regular intervals to repair worn areas and extend its service life. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets Iedpfxsz R Ttps Ag Ajtn The associated control cabinets are located in a separate control room and are thus protected from dust and dirt from the production environment. ### Spare Parts Various available spare parts are included in the scope of delivery and will be handed over to the buyer upon purchase. ### Sale Due to Plant Modernization The sale is taking place due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on-site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price upon request.

Condition: used, Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, control cabinet height: 2,300 mm, overall weight: 20,500 kg, control cabinet length: 3,000 mm, rotational speed (max.): 264 rpm, number of blades: 50, # Lindner Power Komet 1800 – 200 kW – Year of Manufacture 2012 – Secondary Shredder For sale is a regularly maintained and well-kept Lindner Power Komet 1800, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial single-shaft secondary shredder for the processing of pre-treated commercial and construction mixed waste and was permanently integrated into our stationary processing line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Power Komet 1800 - Year of Manufacture: 2012 - Machine Number: 1953 - Operating Hours: approx. 38,000 h - Machine Weight: approx. 20,500 kg - Main Drive: 200 kW - Hydraulic Drive: 11 kW Itodpez R Urajfx Ag Aen - Operating Voltage: 400 V / 50 Hz - Rotor Speed: 264 rpm at 50 Hz - Number of Blades: 50 pieces - Blade Dimensions: 172 × 57 × 28 mm - Screen Hole: Ø 30 mm - Frequency Inverter: ABB ACS-800 - Hydraulic Unit: Bosch Rexroth - Design Throughput: approx. 5 t/h (material-dependent) ### Equipment and Application Area The Power Komet 1800 features a frequency-controlled 200 kW main drive and a hydraulic feed unit for uniform material feeding. The machine was used for the secondary shredding of already pre-sorted and pre-shredded commercial and construction mixed waste. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its operating life. A separate maintenance contract with the manufacturer Lindner Recyclingtech exists for the Lindner Power Komet 1800. In addition to the regular maintenance work, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - Drive bearings completely renewed. - Drive belts completely renewed. - Rotor completely re-armored. The complete rotor re-armoring is carried out regularly to repair areas subject to wear. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate switchgear room and are therefore protected from dust and dirt from the production environment. ### Sale Due to Plant Modernization The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on site during the dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your contact.

Condition: used, Year of construction: 2016, operating hours: 29,500 h, functionality: fully functional, power: 250 kW (339.91 HP), Stationary shredding plant LINDNER Komet HP 2800. Ijdpfxow Tcu Ae Ag Aetn Electric drive: 2 x 250 kW Including control cabinet and hydraulic unit. The machine is available immediately!

Condition: excellent (used), functionality: fully functional, We offer the KOMET PowerVac 200 double-chamber packaging machine—a professional device for vacuum packaging food products in meat processing plants, food processing facilities, the food service industry, and food processing operations. This model belongs to the double chamber model series, i.e., two-chamber machines that perform well where smooth operation, high efficiency, and consistent seal quality are essential. KOMET PowerVac 200 has a chamber measuring 580 x 760 x 215 mm, and the maximum recommended bag size is 400 x 700 mm. As standard, the machine is equipped with 2 sealing bars, each 420 mm long. The machine operates on a 400V, 3Ph+N+PE, 50Hz power supply, with parameters of 4.807 A and 1.6698 kW. Technical specifications: Manufacturer: KOMET Model: PowerVac 200 Type: dual-chamber packaging machine Power: 1.6698 kW Power supply: 400V, 3Ph+N+PE / 50Hz, 4.807 A Chamber dimensions: 580 x 760 x 215 mm Seal length: 2 x 420 mm Maximum bag size: 400 x 700 mm Pump: 40 m³/h External dimensions with lid closed: 1340 x 900 x 1170 mm External dimensions with lid open: 1340 x 900 x 1450 mm Weight: 335 kg standard Isdpsy Snpqofx Ag Ajtn Key advantages of the KOMET PowerVac 200 packaging machine dual-chamber design for efficient vacuum packaging, chamber dimensions: 580 x 760 x 215 mm, wide double seal, stainless steel and durable construction, program-controlled operation with a sensor, a solution for facilities requiring repeatability and reliability.

Condition: good (used), Year of construction: 2000, Lot of boring tools for boring mills Manufactured by Gildemeister-Microbore - Komet Itsdpfowd Tkksx Ag Aen Spindle mount ISO-BT 50 MK 5 In good condition.

Condition: excellent (used), Item description: Assortment of SK40 tools, approximately 250 pieces, from Wohlhaupter, Komet, Granat, etc. ----- Item condition: The goods come from a company liquidation. Itedpfx Aezz Itfeg Ajn Condition: used Internal number: 26.528, 26.530, 26.531 & 26.532

Condition: excellent (used), For sale: a professional KOMET KFK 1 M02 02360 reaming head with micrometric adjustment – a top-of-the-line tool for precise hole machining in industrial production and toolmaking. In very good condition – the tool is fully functional and ready to use. The precise micrometric scale allows for adjustment with an accuracy of 0.01 mm, which guarantees the highest quality finish. • Manufacturer: KOMET Ijdpoz Slgqefx Ag Aetn • Model: KFK 1 – M02 02360 • Mounting: SK40 / DIN 69871 • Scale: micrometric 0.01 mm • Application: precise reaming and finishing of holes • Condition: used – very good technical and visual condition

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Iodsz Uxmbopfx Ag Ajtn Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Ijdoyu Undepfx Ag Astn Delivery time: immediate

Condition: used, New: Yes Itsdez S Df Repfx Ag Aon Year of construction: 2024

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Isdswxmb Ejpfx Ag Ajtn Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Year of construction: 2024, condition: new, functionality: fully functional, Suitable for manufacturer: Lindner Recyclingtech Suitable for model: Lindner Komet 2800 (A) Lindner Power Komet 2800 Ijdjra Dtwjpfx Ag Aetn Length: 2825.00 Width: 292.60 Height: 187.00 Weight in kg: 442.00

Condition: good (used), Tool holder, milling tool holder Ijdpfx Agopgkwgs Aotn -Quantity: 515x SK50 tool holders with tool holders from KOMET, GEWEFA and others Standard recording: ISO 7388-1 SK50 -Standard tightening bolts: ISO 7388-3 -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Scope of delivery complete as shown in the pictures -Dimensions: 10x Euro pallets -Weight: 2464 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, LINDNER KOMET 2200 SHREDDER Shredder for Refuse-Derived Fuel (RDF) and plastic Two 132 kW motors Iodezd Hqhepfx Ag Aetn Number of blades on the rotor: 60 Blade dimensions: 175 x 57 x 28 mm Number of fixed blades: 12 Screen with a 30 mm hole diameter Production: 7 tons per hour Year: 2005

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The unit was dismantled from the production line and operated until the end. Regularly serviced, ready for operation. Itjdjya Uubspfx Ag Aen

Condition: used, This listing is for the H+P Komet Variomag Poly 15 Magnetic Stirrer Itodpfx Aexl E Izsg Aon The unit is in full working condition and is ready for immediate use The Variomag Poly 15 is a precision-engineered, 15-position direct-controlled magnetic stirrer built for laboratory applications requiring simultaneous mixing of multiple samples. Developed by Variomag-USA (2mag GmbH, Germany), this stirrer is ideal for chemical, microbiological, biotechnical, and medical environments. Core Features Direct-Controlled Operation: Offers simple, immediate speed control for easy use. Inductive Drive: Wear-free and low-maintenance magnetic induction ensures quiet, long-lasting operation. Digital Speed Control: Microprocessor-based for consistent performance, with memory recall for repeated tasks. Soft Start Function: Prevents splash and ensures gentle acceleration to protect magnetic coupling. Simultaneous Stirring: Ideal for processing multiple Erlenmeyer flasks or beakers at once—up to 15 × 250 mL or 6 × 1 L vessels. Typical Applications The POLY 15 is designed for a wide range of laboratory tasks, such as: Growing micro-organisms (e.g., aeration and culturing bacterial cultures) Dissolving nutrient media and solids Preventing settling of suspended particles Performing titrations General liquid mixing in R&D, pharma, food science, and education labs

Condition: ready for operation (used), Year of construction: 1985, A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement. Isdpfezf Nb Sex Ag Aetn

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Max. turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Isdoyx U Itspfx Ag Aotn Forklift available for loading the machine! Machine price: €29,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €36,500 excluding VAT This machine is available for inspection in Genk and can be powered on for demonstration!

Condition: good (used), Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads Iodpfx Ageu S Tbho Aetn -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning diameter: 330 mm, center height: 165 mm, center width: 750 mm, turning length: 750 mm, quill stroke: 110 mm, total length: 1,800 mm, total width: 1,200 mm, total height: 1,650 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, overall weight: 1,250 kg, Conventional precision lathe, control WEILER C3/Sinumerik 840D, center high 165 mm, between centers 750 mm, bore Ø 43 mm, speed 1 - 4500 rpm stepless, motor 9 kw, equipement: collet device, coolant device, 3-jaws chuck SCHUNK, drill chuck, tool post MULTIFIX with 6 toolholders, lamp, dimensions 180x120x165 cm, weight ca. 1250 kgs; only a few working hours Itedpfxoz Rpmqe Ag Asn

Condition: used, Technical details: Tool holder shaft type: HSK-A 100 Tool holder shaft type: Wohlhaupter Tool holder shaft type: Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request. Ijdpfxeyug Ebe Ag Astn *

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min Ijdpfx Aey Nb Tkjg Aotn MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: excellent (used), functionality: fully functional, Various as-new VDI40 tool holders with cylindrical receptacle, used tool holders in excellent tested condition, top quality, various manufacturers including e.g. ISCAR. Pos. 1) Order number: 401_404_E2 Available: 4 pcs Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 32mm Price each: €45.00 Pos. 2) Order number: 405_E2_01 Available: 1 pc Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 31mm Price each: €45.00 Pos. 3) Order number: 406_407_408_E2_03 Tool holder for cylindrical tools / boring bars / drills Available: 3 pcs Receptacle diameter: 25mm Price each: €45.00 Pos. 4) Order number: 409_E2_01 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 20mm Price each: €45.00 Itsdpfsyuv Ulex Ag Asn Pos. 5) Order number: 410_411_E2_02 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 8mm Price each: €45.00 Dimensions: D = 83 mm d-2 = 83/40 mm (45.52 mm) d-4 = xx (8,10,12,20,25,32,40 mm) internal diameter H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = 53 mm Form E2 For drilling tools with cylindrical shank With internal as well as external coolant supply Surface hardened, black oxidized and ground

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: Mori Seiki NZX 2000 / 800 SY2 Control: Fanuc 31i A Year: 2012 Available after: KW 50 SPECIFICATIONS Turningdiameter: 200 mm Max. swing over bed: 800 mm Max. turning length: 810 mm Spindle bore: 73 mm Bar capacity: 65 mm Main Spindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Subspindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Itedpfsz Rl Dxsx Ag Aon Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Amount of turrets: 2 Tool capacity: 16 + 16 Driven Tools: 16 + 16 Tool: BMT32 revolution driven tools: 12.000 Y-Axis: 110 mm Req. space (LxBxH): 5.120 x 2.721 m Machine weight: 8.500 kg Equipment Chip conveyor Partscatcher Internal cooling: 70 bar cooling system: Knoll Short Bar Loader: Irco Breuning – ILS MUK 7016 mit Spindelverlängerung Toolholders

Condition: good (used), Different toolholders in very good condition. Iodpfoy Txiqjx Ag Aetn