Used Kontron 325 for sale (835)

Condition: excellent (used), Kontron 325 Tenary Low-Pressure Gradient Pump HPLC up to 10 mL - Pump system for tenary low-pressure gradients Hsdpfelkbptex Aaijnr - All low-pressure gradient devices integrated into one solution system - 10 programs with customized instructions - Column shock protection extends shelf life - Intelligent compressibility compensation - Stackable with other/additional HPLC modules - Full control of the AUtosampler 360 via the keypad with a display Type: Double series-piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby, and sapphire Flow rate: 0.05 to 10 mL per minute Flow rate precision: 0.3% RSD (at 1.5 mL/min) Flow rate accuracy: 2% (at 1.5 mL/min) Flow linearity: r2 > 0.998 Pressure: 40 MPa or 7500 psi (flow-dependent) Pressure sensor: Piezoelectric sensor Display: 2x40-character LCD External control: RS-232C Inputs: Injection synchronization, flow stop Outputs: Pressure and drive alarm, pressure signal, relay injection, relay step, RS-232 (for Autosample 360) Power supply: 110/220 V +-10%, 50/60 Hz, 120 VA Dimensions: 40 cm wide, 54 cm deep, and 17 cm high Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 8,188 h, load capacity: 2,500 kg, lifting height: 7,400 mm, free lift: 3,600 mm, fuel type: electric, mast type: triplex, battery manufacturer: HAWKER, battery voltage: 48 V, color: orange, Equipment: CE marking, full service history, lighting, Manufacture: Jungheinrich Type: EVT 235 Year of manufacture: 2008 Load capacity: 2500 kg Hnsdpfeu Rqu Esx Aaijr Free lifting height: 4296 mm Lifting height: 7400 mm Center of gravity distance: 600 mm Travel speed without load: 14 km/h Lifting speed without load: 0.64 m/s Battery voltage: 48 V Battery capacity: 620 Ah Weight with battery: 3700 kg

Year of construction: 1988, condition: ready for operation (used), A Krämer & Grebe rotary cutter is available. Bowl volume: 325l, knife speed: 3000rpm, knife peripheral speed: 120m/s, steam pressure: 2-4bar, steam temperature: 120°C-150°C, cooking temperature: 65°C-85°C, cooling temperature: 45°C-50°C, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2050mm, weight: approx. 4300kg. Including accessories such as knives, plastic parts and assembly wrench. The machine is dismantled and the control cabinet and the motor are located in the hall. An on-site inspection is possible. Hsdpfx Ajyypl Ajaijnr

Condition: new, Heidenhain ERA 880 angle measuring device. 325 692-07, serial number: 27 690 918, serial number as shown in the photo. Unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Hedpfx Aei Eahmoaienr

Condition: new, Kontron CP603 PC board, serial number: 248072028, unused, 100% functional, scope of delivery as shown in the photos. Hnjdji Ebwpepfx Aaijr

Condition: used, functionality: fully functional, machine/vehicle number: 91138630, Year of construction: 2019, operating hours: 12,607 h, load capacity: 2,500 kg, lifting height: 6,950 mm, free lift: 2,400 mm, mast type: triplex, construction height: 2,950 mm, fork length: 1,200 mm, drive type: Lithium-Ionen, Reach truck Chassis number: 91138630 Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Polyurethane Rear tire type: Polyurethane Battery type: Lithium-ion Description: Maintenance performed + safety inspection completed Side shifter, fork positioner, Hnodeztt S Rjpfx Aaisr Weighing scale, safety light, Fork camera, lift height indicator

Condition: used, functionality: fully functional, machine/vehicle number: 91138631, Year of construction: 2019, operating hours: 11,602 h, load capacity: 2,500 kg, lifting height: 6,950 mm, free lift: 2,450 mm, mast type: triplex, construction height: 2,950 mm, fork length: 1,150 mm, drive type: Lithium-Ionen, Reach truck Chassis number: 91138631 Hnsdpfxsztt S Ds Aaior Load centre: 600 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery type: Lithium-ion Description: Newly serviced and UVV inspected Sideshifter, fork positioner, Scale, safety light, Fork camera, lift height indicator

Year of construction: 2009, condition: good (used), Rebuilt: 2009 Hnjdpfx Aodyk Rreaijr Built in: 1989 Size: 457 x 292 mm Speed: 6.000 c/h

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik Hnjdpfx Aasv Tp D Hsier - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), Modular unit, finishing unit, grinding unit, grinding station, belt sander, belt sander, edge sander, edge sanding machine, profile grinding unit, small belt sander -Belt sanding unit: from belt sanding machine -Type: unfortunately no type designations -Drum motor: Perske type DKAL 2117/2 3.7 kW 2840 rpm -Roller: Ø 183 x 370 mm -Rollers: Ø 117 x 325 mm -Individual components: see photos -Transport dimensions: 1110/560/H300 mm Hedpfx Aszrfb Uoaionr -Weight: 195 kg

Condition: used, Year of construction: 2021, operating hours: 2,230 h, CAT 325, year of manufacture 2021, with only 2,230 operating hours. In top condition. Hnsdpfjzg S Abex Aaior Operating weight approx. 28,500 kg Engine: Cat C4.4 turbocharged diesel, engine output 128.5 kW (172 hp) Displacement: 4.4 liters Emissions standard: EU Stage V Fuel tank capacity: approx. 313 liters Hydraulic system capacity: approx. 230 liters Max. digging depth: 6.70 m Air conditioning CE marking

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: TR0071_ALM-RD 325, NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD325 Type: ALM-RD325 incl. 2 x air filters Delivery quantity: 5.08 m³ / min * Compressed air connection 1 1/2 " Dimensions L x W x H: 555 x 505 x 874 mm Weight: 83 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Hjdpfx Ashu Sb Roaienr Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) Hnodpfx Aajzrd Nqjijr FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: as good as new (ex-display), 4-SIDE EDGE BANDING LINE + DRILLING Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: 202005a) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFL 325/ M1 / C 202005b) Turning Station "HOMAG" Mod. TDL (from lengthwise to crosswise) 202005c) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. KFL 326/ M2 / C 202005d) Connecting Roller Conveyor 202005e) Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 503 Hjdjzrd Dhepfx Aaionr

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, used, in good condition, 100% functional, delivery as per photos, professionally fully overhauled and tested with 3 months' warranty, 100% functional, delivery as per photos. Hnodpfx Asx Etdgsaior

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, professionally fully overhauled and tested with 3-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective exchange part must not show any mechanical damage such as fractures, as these cannot be repaired. In such cases, an additional charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 114 ID 325 005-12 SN15160246 under the exchange service. The unit is professionally fully overhauled and tested, with a 3-month warranty and guaranteed full functionality. Scope of delivery according to photos. For both repair and exchange services, your returned part must be free from mechanical damage such as breakages, as these are irreparable. If such damage is found, a surcharge of €1,000 incl. VAT will be invoiced. Hsdpfxsx Etdms Aaienr

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Hydraulic cylinder & unit Ejector motor & bearing Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Hnsdpfx Aasyk Tuuoijr Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Maintenance-free knife shaft system Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 302/0252, Used CFS CUTMASTER cutter from 2010. Hodpfxszaaw Us Aaienr For videos and more information, please contact me.

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Hnodpfxsxdttps Aaier Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: good (used), Year of construction: 2013, operating hours: 12,200 h, functionality: fully functional, Baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer: Paal Type: Konti 325 G Year of manufacture: 2013 Operating hours: 12,110 Pressing force: 100 t Drive power: 2 x 55 kW Infeed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 5-strand automatic Throughput at: 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, lightweight waste, plastic waste The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: Hsdozk Apyepfx Aaijnr All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-wire automatic Throughput at: 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste The press is in good working order and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: Hnjdpfozk Aluex Aaier All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. This offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Bezel, stick, lynette Hedsd Nhivepfx Aaienr -Max. Diameter: 325 mm -Tip height: 405 mm -Edition: ball bearings -Drawing: in the photos -Dimensions: 780/140/H845 mm -Weight: 97 kg

Condition: good (used), Geared motor, electric motor, three-phase motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW Hnjdpfx Aockbg Njaijr -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 1x motor available -Dimensions: 400/230/H230 mm -Weight: 24 kg

Condition: used, Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: Clamping aid for workpiece clamping -Bridge thickness: 16/18 mm Hnsdpfx Ajk Egk Njaier -Dimensions: 325/247/H115 mm -Weight: 13.7 kg

Condition: good (used), Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg Hjdpfx Aasvck Hzeionr