Used Kotte Vt 16.500 for sale (693)

Condition: used, Year of construction: 2022, Tires: 750/60 R30.5, PTO shaft, air brake system, K80 lower linkage, Jurop PN 155 R compressor, electric compressor control, hydraulic suction arm on the front right, front-center filling accelerator, trailing steering axle, 40 km/h, Bomech Farmer 15 trailing shoe toolbar. Itedpfx Aoz Scq Hsg Aen

Condition: used, Year of construction: 2007, 27-meter drag hose boom, 4-point hydraulic system, sight glass, automatic central lubrication, hydraulically operated filling dome at the front, filling accelerator in the center front, 2 suction nozzles 150 mm at the front left and right, K 80 lower hitch, forced steering with 2 cylinders, flow meter, tire pressure control system, drawbar suspension, air suspension with BPW axles, electric control, fenders, tires 650/65R30.5. Ijdpsz Sbchjfx Ag Aetn

Condition: new, Year of construction: 2026, 15,600 liters, tires 750/60R30.5, LED lighting, underrun protection, 40 km/h, Jurop compressor PN 155r with special air filter, professional filling aid with side cleaning opening, wedge flange slide valve at the front and rear with hand lever and quick-release coupling, sight glass, ventilation valve at the front and rear, Bomech Farmer Profi 15 m trailing shoe distributor, operator terminal. -Location: Heeslingen- Itodpoz Sb R Eefx Ag Aon

Condition: new, 17,300 liter volume, tires 750/60R30.5, LED lighting, Jurop PN 155R compressor, professional filling aid, wedge flange slide valve DN 150, Bomech Farmer 15m trailing shoe distributor, operator terminal. – Location: Harsefeld – Iodpfx Ajz Sb Siog Aotn

Condition: new, 17,300 liters, bottom-mounted hitch with ball coupling, tires 750/60R30.5, underrun protection, LED lighting, Jurop compressor PN 155R, sight glass, venting valve at the front and rear, wedge flange slide gate valve, Bomech Farmer 15m trailing shoe distributor, slope compensation, operator terminal. -Location: Soltau- Itodpfx Aez Sb Rrjg Asn

Condition: used, Year of construction: 2010, Tyres: 750/60 R30.5, K80 lower hitch, PTO shaft, air brake system, load sensing, suction arm front right, Vogelsang rotary lobe pump VX186-260Q year 2023, forced steering, Roto-Cut, rear linkage, Vogelsang trailing hose boom 24m. Iedpfxjz Sa Rbo Ag Ajtn

Condition: used, Year of construction: 2019, Tires: 750/60 R30.5, K80 lower linkage, forced steering, driveshaft, self-contained hydraulics, hydraulic support leg, hydraulic drawbar suspension, double-curved suction arm on the front right, suction accelerator on the suction arm, Vogelsang rotary lobe pump, RotoCut, automatic central lubrication, air suspension, compressed air braking system, lifting mechanism, Bomech Farmer 15m trailing shoe distributor, year of manufacture 2019. The sale is made with the exclusion of any warranty. Itjdoz Saa Sjpfx Ag Aon

Condition: used, maximum load weight: 28,410 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 02/2012, loading space volume: 30 m³, Year of construction: 2012, Equipment: ABS, Stock number: 5859 Kotte / Garant approx. 30 m³ slurry tank semi-trailer ----* Manufacturer: Kotte / Garant * Type: Slurry semi-trailer * First registration: 02/2012 * Gross vehicle weight: 35,500 kg * Unladen weight according to vehicle registration document: 7,090 kg * Payload: 28,410 kg * Volume: approx. 30 m³ * Axles: 3x BPW axles / 1st axle liftable / 3rd axle trailing * Tires: 385/65 R 22.5 approx. 50% remaining tread * Suspension: Air suspension * Color: Blue Iodpfxezvk N So Ag Aetn * ABS / EBS * Rotary lobe pump Börger FL 1036 * 6000 liter pump * 8" docking funnel with manual slide valve * 6" pivoting arm at the rear with pneumatic slide valve * Flushing line (manually operated) * Permanently bolted cover at the rear * Dome cover on top * Vent slide on top * Vacuum valve on top * Control box at the rear left * Hose tray left + right * Sight glass at the rear left * Full-load supports * Individual fenders German vehicle!! German documents!! Note on possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, Year of construction: 2025, Tires: BKT VF 560/60 R 22.5, underrun protection, 40 km/h, compressor PN 155R Jurop, professional filling aid, galvanized blind cover for quick-release couplings 6", swivel element, work light, operator terminal. Itodsz Scabspfx Ag Aon

Condition: excellent (used), Year of construction: 2016, operating hours: 33,250 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC-620, overall weight: 8,500 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 3/5-axis machining center Manufacturer: Spinner Type: VC-1150 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 33,250 h S/N: VTXXXX Technical parameters: ----- • Travel ranges X-Y-Z: 1,150 x 620 x 600 mm • Work table: 1,400 x 620 mm • Max. workpiece weight: 1,500 kg • Spindle: 18,000 rpm • Magazine: 60 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, • Paper band filter with 300L additional tank volume Isdpfxsz D Ak Uj Ag Aotn • LED work area lighting • Oil mist extraction • 3D touch probe • 2-axis NC rotary table with four spindles • Chip conveyor • Machine weight: approx. 8.5t • Dimensions: 2,650 x 2,800 x 2,700 mm Accessories: ----- • Documentation

Condition: used, maximum load weight: 23,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 09/2025, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, Kotte combination trailer for slurry and bulk goods * Produced in 2015, new TÜV inspection and registration in 02/2019 * The slurry chamber at the bottom can be hydraulically raised to increase the tank volume. * Vogelsang slurry pump * Conveyor belt system at the top for unloading bulk materials * Hydraulic rear flap with slider * Grain-tight * The chassis and combination technology are fully functional Itsdpfx Agjwpyzge Asn * Air suspension * Self-steering axle For further information, we are happy to assist you.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Itsdpfx Asy Avg Esg Ajn Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: used, Year of construction: 2024, Tank Intake manifold with quick coupler left + right Swivel element with / intake manifold rear Suction arm preparation RAL 7016 anthracite gray TÜV certificate / 40 km/h Underride guard with illumination! SPECIAL PRICE LASER SALE!!! / Plexiglas cover Ijdpfx Agjr E Avwe Astn

Condition: used, Year of construction: 2020, Extraction nozzle diameter: 160 mm Nominal volumetric flow: 1950 m³/h Iodpfx Ajz A Eacog Aetn Volumetric flow monitoring: differential pressure indicator Vacuum: 3200 Pa Filter area: Filter cleaning: motorized Motor power: 2.2 kW Machine length: Machine width: Machine height: Weight: 320 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: UC-1871, spindle speed (max.): 3,500 rpm, center width: 635 mm, center height: 115 mm, No minimum price – guaranteed sale to the highest bidder! This is a CNC internal grinding machine, converted from a CNC lathe. TECHNICAL DETAILS Center height: 115 mm Distance between centers: 635 mm Swinging diameter over bed: 380 mm Swinging diameter over removable bed: 520 mm Spindle bore: 75 mm Max. spindle speed: 3,500 rpm MACHINE DETAILS Control system: Fanuc 0-T Connected power: 15 kW Itjdpfjz Nithsx Ag Asn Dimensions (L x W x H): 3,800 x 1,700 x 2,000 mm Weight: 6,000 kg Shipping packages: 2 pcs. EQUIPMENT Documentation

Condition: used, Year of construction: 2023, with ball head K80 for 3to drawbar load Wheel arches per axle for plastic / fabric mudguards Air suspension Agroturn, 2,225mm Preparation for forced steering / ventilation Air bellows on first axle Tandem eccentric worm-drive pump type Wangen / BOMECH towing shoe Iedpfx Aget Dnuuj Astn

Condition: used, Year of construction: 2024, Wedge flange gate valve 6'' VL with back Wedge flange gate valve 6'' VR with / back Blind cover galvanized, for quick coupler 6' Bracket for suction nozzle / VR 1 swivel joint Docking device NW200 rear top for TAV tank size / 25.250l Bereifu Iedpfxett A Ums Ag Aotn

Condition: used, Year of construction: 2023, Suction hose Perrot system, Ø150 mm, 5m Jurop vacuum compressor PNR 155 (15,200 / ltr) Plastic mudguard for Ber. Profi filling aid NW 200 front / swivel element rear Wedge flange slider 6 inch VL Wedge flange slider 6 inch / VR Bracket for Itodpfsr T Rfrex Ag Asn

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, type of input current: AC, total width: 3,000 mm, total length: 4,500 mm, input voltage: 380 V, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 150 mm, working width: 2,000 mm, total height: 3,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 3,000 mm, compressed air connection: 3 bar, High-Precision CNC Cutting Machine for Carbon Fiber Prepreg & Composite Materials Professional CNC cutting plotter designed for precision cutting of carbon prepreg, fiberglass, technical textiles, foams, leather, PVC, and other advanced composite materials. Ideal for aerospace, automotive, marine, motorsport, and composite manufacturing applications. The machine delivers extremely accurate and repeatable cuts while significantly reducing material waste and production time compared to manual cutting. Equipped with vacuum table technology for secure material fixation and clean, stable processing of delicate prepreg materials. Suitable for both prototyping and serial production. Key advantages: • High cutting precision and repeatability • Excellent for carbon fiber prepreg cutting • Fast and efficient production workflow • Clean edge quality without fraying or burning • Reduced material waste • Vacuum working table for stable material holding • Industrial CNC control system • Vacuum pump included • Suitable for complex geometries and nested parts • Reliable operation for composite manufacturing environments Applications: • Carbon fiber prepreg cutting • Fiberglass and aramid fabrics • Composite part production • Automotive and motorsport components • Marine composite manufacturing • Aerospace applications Ijdpoy Tvatefx Ag Ajtn • Technical textile cutting • Prototype and serial production The machine is in very good working condition and can be tested on-site. Vacuum pump is included in the sale. For additional information, technical details, videos, or pricing, please contact us.

Condition: good (used), Year of construction: 2006, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: M086, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, spindle motor power: 22,000 W, Vertical turret lathe with CNC Control: FANUC Series 18i-TB Number of turrets: 1 Number of tools stations: 12 Chip conveyor: 3508734 Itedpfjtmq Ukjx Ag Aon Boring bar holder: dia. 50 mm The machine is still under power.

Condition: used, Year of construction: 2015, functionality: fully functional, Vintage 2015, first taken into production 18.02.2016 Isdpfxozi Dc Ej Ag Aetn Hamamatsu > 50% lifetime left Flat Panel Detector: > 50% lifetime left

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,949 h, load capacity: 1,500 kg, lifting height: 3,360 mm, fuel type: electric, mast type: telescopic, construction height: 2,220 mm, battery capacity: 500 Ah, battery voltage: 48 V, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 125/75-8, overall weight: 3,002 kg, total height: 2,220 mm, total length: 1,800 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, YALE ERP 15 VT – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 3.360 mm Closed height: 2.220 mm Mast: Standard (2W330) Fork carriage: 2A Drive: Elektro 48V Battery: 48 V/500 Ah (2018) Charger: ohne/without Tyres: Superelastik SE 18x7-8 (70%) / 125/75-8 (60%) Service weight: 3.002 kg Length: 1.800 mm Ijdpfxjz Apxrs Ag Aotn Width: 1.070 mm Year of manufacture: 2012 Operating hours: 4.949 h Condition: working condition EQUIPMENT 3rd valve, Overhead guard cover ATTACHMENTS Sideshift Internal no.: 1309123 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 1999, Drawbar eye (top attachment), universal joint shaft, support leg, Bomech 9m trailing shoe linkage, year of manufacture 2017, tires 700/50-26.5, hydraulic compressor switching system, suction arm on the left, pneumatic braking system, B+P vacuum compressor, trailing drawbar axle. Iodez Sax Ispfx Ag Ajtn

Condition: used, Year of construction: 2007, front tire size: 540/65R30, rear tire size: 650/65R42, Equipment: compressed air brake, front power take-off,

Condition: used, Year of construction: 2012, Operational condition and available now. Ijdpfx Ajxva Uqeg Astn Additional information per request!