Used Kraft Kraft Tt60-40L-C2-H for sale (57,659)

Condition: excellent (used), Year of construction: 2017, CNC cylindrical / roll grinding machine KRAFT / Praise TT60-40L-C2-H, used – Ø 600 x 4,000 mm, Siemens Traveling-table CNC grinder for rolls and heavy shafts up to 4,000 mm between centres and 3 t between centres. Built 2016/2017 by Praise Machinery, Taiwan, and hardly used since. Located in Einbeck (Germany), available at short notice. Inspection by appointment. Technical data (manufacturer's spec sheet): - Swing over bed: 600 mm - Distance between centres: 4,000 mm - Centre height: 320 mm - Max. workpiece weight: 3,000 kg between centres, 6,000 kg on steady rests - Control: Siemens Sinumerik CNC, Siemens drives - Grinding wheel: 760 x 100 x 304.8 mm, 45 m/s, wheel motor 22.5 kW, stepless spindle speed - X-axis travel 315 mm, 0.0005 mm/pulse; Z-axis travel 4,400 mm, 10–6,000 mm/min - Workhead speed 8–80 rpm, 11.25 kW - Tailstock quill stroke 100 mm, MT 6 Nlodpfx Agoz Ebl Terog - Accuracy: roundness and cylindricity 0.002–0.005 mm, Ra ≤ 0.3 µm - Hydrostatic/hydrodynamic lubrication of wheelhead and carriage - Connected load approx. 45 kW, 400 V / 50 Hz - Footprint approx. 13,000 x 2,900 x 1,800 mm, weight approx. 14.7 t Equipment: - Swivel workhead 0–90° - Electromechanical tailstock quill with foot pedal - Crowning device (type C2) - Grinding wheel guard sensor - 4-jaw chuck - 2 two-point steady rests (neck Ø 100–300 mm) - Dresser, wheel flange with puller, dial gauge, magnetic base - Coolant system with magnetic and paper band filter - Full enclosure with sliding doors, telescopic covers - Electrical cabinet with air conditioner - CE documentation, operating manual Dismantling, transport and re-installation can be arranged. Price on request.

Year of construction: 2017, operating hours: 2,000 h, condition: ready for operation (used), travel distance X-axis: 315 mm, overall weight: 14,100 kg, total width: 2,900 mm, total height: 1,800 mm, spindle motor power: 22,500 W, product length (max.): 13,000 mm, number of axes: 2, Cylindrical grinding machine manufactured in 2017. This KRAFT TT60-40L-C2-H features a grinding diameter of 600 mm and a grinding length of 4000 mm. It has a maximum workpiece weight of 3000 kg and a grinding wheel diameter of 760 mm. If you are looking to get high-quality grinding capabilities, consider the KRAFT TT60-40L-C2-H machine we have for sale. Contact us for further details regarding this machine. Nodez Ep Ivepfx Agrolg - Grinding Diameter: 600 mm- Grinding Length: 4000 mm- Center Height: 320 mm- Max. Workpiece Weight (Between Centers): 3000 kg- Max. Workpiece Weight (With Steady Rests): 6000 kg- Grinding Wheel Diameter: 760 mm- Grinding Wheel Width: 100 mm- Grinding Wheel Speed: 45 m/sec- Table Travel: 4400 mm- Table Speed (Continuously Variable): 10 - 6000 mm/min- Workpiece Drive Speed: 8 - 80 1/min- Tailstock Quill Stroke: 100 mm- Tailstock Quill Taper: 6 MK- CNC Control: Siemens 828D with grinding cycles- Guideways and Spindle Bearings: Hydrostatic- Electrical Specification: Metric execution, 400V, 50 Hz, 3 Phases- Included Equipment & Features:* Hydraulically actuated tailstock quill* CE execution* Full enclosure* Automatic coolant and lubrication system* Manual grinding wheel dresser* Grinding wheel flange* Open steady rests (2 pcs)* Magnetic and paper band filter* Telescopic cover* Live center (2 pcs)* Set of operating tools* Adjustable grinding headstock* Faceplate* Technical documentation in German

Condition: good (used), Horizon PF-40L Automatic Folding Machine Machine in perfect condition, currently in production. Manufactured in 2022, the machine was stored in a bank and has not been in production. Compact external dimensions, mounted on wheels for easy movement. Automatic machine setup from the control panel, high-stack feeding, extended feeding. Technical specifications: Maximum format: 320x630mm Min. format: 125x128mm Basic weight: 40-160gsm Speed: 23,000 pcs/h 2 parallel cassettes 230V power supply Electrically controlled delivery Counter with batching function Smooth speed and feed adjustment High-stack feeding Sound-insulating on all units and cassettes Nedpfx Aszt H Sdjgrslg Full documentation

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers. Njdpfoy Au I Usx Agrslg

Condition: used, Year of construction: 2018, functionality: fully functional, turning diameter: 1,000 mm, turning diameter over bed slide: 710 mm, turning length: 8,000 mm, Used heavy-duty lathe with extensive steady rest equipment – ideal for pipe machining and long rolls! This robust conventional lathe with an impressive turning length of 8,000 mm was specifically designed for pipe machining applications. The sophisticated machine design allows the cutting edge to easily pass the open steady rests – ideal for precise machining of long, hollow workpieces. Technical Highlights: • Turning diameter over bed: 1,000 mm • Turning diameter over support: 710 mm • Center height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tons • Main drive: 30 kW with frequency converter, continuously variable Design advantages: • Machine bed cast in one piece and artificially aged – for maximum stability and stress-free operation • 5 hardened and ground guideways for maximum precision • Continuous feed control of the longitudinal axis via ball screw – no Norton or lock-box gearing • Electric-driven tailstock with hydraulic clamping • Manually adjustable cross support with trapezoidal thread spindle • 4-station tool carrier, manually pivoting • Triple-guided turning support – for extremely smooth running Nlodov Tnttepfx Agrsg Steady rests & tube processing: • Various steady rests (stationary and follow-on) optional Available • Motorized steady rest carriers with hydraulic clamping • Spindle adjustment conveniently possible from the operator's side • Traveling steady rests can be mounted either on the left or right Application: Thanks to its sophisticated design, the machine is ideally suited for light to medium-duty machining – especially for the precise machining of tubes. The continuously variable speed and feed control ensures high flexibility and ease of use.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 21239, pressing force: 38 t, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 15,000 kg, oil tank capacity: 80 l, empty load weight: 5,580 kg, operating pressure: 200 bar, input frequency: 50 Hz, Equipment: documentation/manual, Avermann AVOS MPC 20 + HKV – 20 m³ | Tilting mechanism 240/660/1100 L | Cable & hook attachment | Discharge flap For sale: Avermann AVOS MPC 20 P/A/L/R + HKV compaction container, built in 2016, with a capacity of 20 m³. This robust Avermann compaction container is equipped with an integrated hydraulic lifting and tilting mechanism, making it particularly suitable for locations where roll-on-roll-off containers need to be emptied directly into the container. The tilting mechanism features a hydraulic comb attachment for 240-liter containers and a DIN attachment for 660- and 1,100-liter roll-on-roll-off containers with a flat lid. This makes the machine versatile and suitable for various types of waste containers. In addition, the compaction container is suitable for both cable and hook attachments. At the rear, the machine is equipped with a discharge flap instead of a traditional discharge door, making this version particularly interesting for certain waste streams and applications. Technical specifications: Brand: Avermann Type: AVOS MPC 20 P/A/L/R + HKV Year of construction: 2016 Serial number: 21239 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP55 Maximum working pressure: 200 bar Own weight: approx. 5,580 kg Permissible total weight: 15,000 kg Integrated hydraulic lifting and tilting mechanism Nedpoz Ergzsfx Agrelg Hydraulic comb attachment for 240-liter containers DIN attachment for 660- and 1,100-liter roll-on-roll-off containers Cable and hook attachments Equipped with a discharge flap Condition: The machine is currently in used condition and shows visible signs of wear and tear, consistent with its age and use. The compaction container can be delivered in its current state, but if desired, it can also be fully overhauled, sandblasted, and repainted in a color of your choice. Price in current condition: €9,000 Price fully overhauled, sandblasted, and repainted: €17,500 Due to the combination of the 20 m³ capacity, integrated tilting mechanism, and flexible container attachments, this is a very practical machine for, among other applications, industry, logistics, manufacturing companies, recycling, and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information or technical questions. Keywords: Avermann, AVOS MPC20, MPC 20, compaction container, 20m3, waste compactor, container compactor, HKV, lifting tilting mechanism, tilting mechanism, 240 liter, 660 liter, 1100 liter, DIN attachment, comb attachment, hook attachment, cable attachment, discharge flap, waste compaction, recycling.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, Giben panel saw model Prismaic 2 SPT H 100 – Year 2002 Njdpfx Agsy R D Rhjrelg Machine in excellent condition, fully operational and ready for use. Equipped with side rear loading. Cutting width: 4300 mm. ✔ Function tests performed ✔ Complete maintenance (pneumatic, mechanical, and electronic) Machine inspected and overhauled by a company specializing in service and maintenance. 📞 Contact us for more information or to schedule a demonstration.

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Nsdpfx Agoz Ap Imsrjlg Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Year of construction: 2004, condition: good (used), machine/vehicle number: 041115166, Offer 26312 Technical data: - Maximum swing over bed: 550 mm - Maximum swing over cross slide: 310 mm - Turning length: approx. 1500 mm - Travel distances: - Z-axis: 1600 mm - X-axis: 300 mm - Spindle mounting according to DIN - Spindle bore: 82 mm - Taper of tailstock spindle: MK 5 Nlodpfxozvna Uo Agrog - Travel of tailstock spindle: 150 mm - Spindle speeds: 80 - 3500 rpm - Rapid traverse rates X / Y - Drive power: 17 kW - Including: - CNC control: FAGOR - Hydraulic chuck - Electric handwheels - 8-position tool turret - Manual tailstock - Coolant system - Footprint: approx. W 4400 x H 2100 x D 2300 mm - Weight: approx. 4400 kg

Condition: used, Year of construction: 2016, functionality: fully functional, Conventional guide and lead screw lathe for heavy-duty machining of large workpieces. With a 1000 mm turning diameter over the bed and a 4000 mm distance between centers, the Kraft BV-40160 covers the entire spectrum from long shafts to heavy flanges. DRIVE & SPINDLE - Main motor 22 kW with frequency inverter, stepless speed control 6–800 rpm in 4 gear stages - Spindle bore 180 mm, spindle nose A2-15 - Turning diameter in the cross slide 1280 mm for single parts CAPACITIES - Turning diameter over bed: 1000 mm - Turning diameter over cross slide: 710 mm - Distance between centers: 4000 mm - Center height: 500 mm - Bed width: 560 mm (3 V + 1 flat) TAILSTOCK - Quill diameter 125 mm, stroke 250 mm, taper MK6 THREADS & FEEDS - Lead screw diameter 60 mm - Metric threads 0.8–14 mm, inch 2–28, module 0.4–7, DP 4–56 - Longitudinal feed 0.05–0.84 mm/rev - 4-position tool holder, tool shank cross-section 40 mm TECHNICAL DATA - Year of manufacture 2016 - Net/gross weight 9000 / 9700 kg - Dimensions (L×W×H) 5845 × 1950 × 1925 mm - Connection 400 V, 50 Hz, 3 phases CONDITION Used, operated for less than one shift. Located near Nuremberg, available for inspection while powered on. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - Faceplate (spindle nose A2-15) - Steady rest / follower rest - 4-position tool holder Nljdpfxszpfgfo Agreg - 2-axis digital readout (DRO) - Tailstock with center Price on request. We will be happy to advise you – competent consulting and nationwide service.

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 301599, Rampf DC-CNC Working area: 800x400x200 mm Number of components: 3 (see photos) Nledezzb Hlspfx Agreg 1 x Isocyanate 2 x Polyol Temperature control unit Complete documentation available Details upon request.

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Njdpfjzzp Epsx Agrolg Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message.

Year of construction: 2001, condition: used, Technical details: lifting capacity: 0,15 t span width: x. 1200 mm arm length:: max. 1200 Lifting height: 2400 mm stroke speed: handgesteuert weight of the machine ca.: 0,42 t dimensions L x W x H: 2,2 x 0,75 x 1,65 m Engine hoist / engine crane Welded sectional steel Lifting movement via lifting beam pneumatic vertical movement (pneumatic pressure cylinder) via hand knob Load hook type SIKA 1, cable safety device Njdju Nvixopfx Agrslg movable, braked in vertical position of the drawbar, double wheel swivelling 90° right/left, front area 2x wheels fixed Accessories 2x various lifting straps and 1x chain length approx. 950mm *

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Nice Microcut Challenger lathe turning over bed 550 mm in gap 770 mm over slide 320 mm Center length 1500 mm Control Siemens 810D Nedpfx Ajy D Talogrjlg Chip conveyor Coolant equipment Multifix toolpost with 10 holders Fixed steady Travelling steady 3 jaw chuck manual All manuals present

Year of construction: 2008, condition: ready for operation (used), Offered for sale is a Kern Kraft chamber filter press. Max. filtration capacity: 2000l/24h, number of filter plates: 10 standard, expandable to 20, filter area range: 3.9m²-8m², chamber volume: approx. 40l. Equipped with plates and cloths, pressure switch, stainless steel filter cake tray and stainless steel piping, expansion tank, check valve and automatic shutdown, pump and candle filter housing with filter cartridge and control cabinet. Dimensions X/Y/Z: 2500mm/1000mm/1800mm, weight: approx. 630kg. An on-site inspection is possible. Nsdpfx Agsztzqnsrslg

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels Nedpfjwnrf Usx Agrjlg - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Year of construction: 2018, condition: used, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg Nlodpjhx R Dvsfx Agrog total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained, high-performance cycle turning machine with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 2 steady rests (small + large), and articulated chip conveyor. Manufacturer: MICROTURN, Origin: Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height: 350 mm Center distance: 4000 mm Swinging diameter over bed: 690 mm Swinging diameter over cross slide: approx. 420 mm Swinging diameter in the gap: 870 mm Spindle speeds: 0 – 2400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Machine dimensions + chip conveyor L x W x H: 7350 x 2450 x 2050 mm Machine weight: 6,800 kg Accessories / Special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keypad Nodpfxszfqdno Agrolg o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 2 fixed steady rests (1 x small, max. inner diameter approx. 220 mm, 1 x large, max. inner diameter approx. 380 mm) • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant New servo controller FAGOR for the main spindle, repair costs €4,950.00 net. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 441 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Nsdox Tft Aopfx Agrslg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, 1 x Parts Washing Machine Kraft K 20 Year of manufacture: approx. 1990 In very good condition Technical data: Drum capacity: 40 litres 24 rpm Dimensions (L x W x H): 0.7 x 0.8 x 0.65 m Nlodex Hffrspfx Agrsg The machine can be inspected under power.

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Nsdpfjwuzzrox Agrslg Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Nedezfp Hhspfx Agrjlg

Year of construction: 2010, condition: ready for operation (used), A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible. Nljdpfxjzkldys Agrsg

Condition: used, functionality: fully functional, This pre-owned STOW pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage requirements. Its modular high-bay design is ideal for logistics centers, industrial settings, large-scale warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet racking solution offers efficient storage for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 5,040 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm, model PNB0472 - Beam color: yellow, painted - Frames: approx. 1,050 x 110 cm, pre-assembled - Frame color: blue, painted - Levels: floor + 4 - Pallet spaces: 270 including floor positions - Model: STOW, pre-owned SCOPE OF DELIVERY: - 19 x Frames (approx. 1,050 x 110 cm), pre-assembled - 144 x Beams (approx. 270 x 12 x 5 cm) PNB0472 - 288 x Safety pins Price: €6,960.00 net €8,282.40 gross An invoice with VAT shown separately will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany via our logistics partners – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer individually tailored to your requirements. Whether for new builds, modifications, or expansions – we offer expert advice on your racking configuration. Nsdpfx Ajz Eqmyegrolg SHOWROOM: You are welcome to visit our showroom! On site, you can get a comprehensive impression of our pallet racking, storage shelves, and other solutions. Many systems are set up and ready for you to experience directly. Our expert consultants are available to answer your questions and provide personalized advice – we look forward to your visit! Haven't found what you're looking for? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us via message or phone call. You will find our phone number on our company page ☎️ We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Year of construction: 2014, condition: used, Power: 165 kW (225 HP) Number of cylinders: 6 Empty weight: 26.400 kg Dimensions (LxBxH): 900 x 255 x 300 cm Track width: 5 cm Serial number: 2299 Designed for heavy-duty foundation work, anchors, and geotechnical applications Hour meter reading: 2684H Equipped with wireless and wired remote controls Dual drill head Drill motor brand: Eurodrill Drill motor 1 type: RH4300 Year of manufacture: 2014 Drill motor 2, for hammer rods, type: HD5012 Year of manufacture: 2014 Drilling flushing water: 3’’ water hose External engine RPM display on the front left Rubber-coated tracks Track width: 500 mm Dual automatic lubrication Hydraulic outriggers Engine: Deutz Engine power: 225 kW Number of cylinders: 6 Operating weight: 26,400 kg Includes: 100 unused pipe clamps Overall dimensions: 9,000 x 2,550 x 3,000 mm Remarks: signs of use, Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Nodjz Df R Djpfx Agrelg Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.