Used Kraussmaffei 50-90 C1 for sale (43,423)

Condition: refurbished (used), Krauss Maffei injection molding machine Kjdpfx Ahjrdg Tpo Aedp 25 tons Year: 2000 IPC not working (see map)

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) Kjdsxak Ucjpfx Ah Ajdp 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Kdodpfx Ahsw A N Hfe Asp Maximum mould opening force: 160 kN Moving platen force – opening: 86 kN Moving platen force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie-bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Maximum plasticizing rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Hydraulic oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: - Oil tank - Anti-vibration pads - 3 × core pullers - 8 × hot runner control zones - 2 × air valves - Robot interface according to Euromap 67 Additional information: - Machine located in Poland - Immediately available - Loading, transport, installation, and commissioning can be organized

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Kdsdpfx Ahex H Au Ro Asp Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

Condition: ready for operation (used), Year of construction: 1999, operating hours: 57,830 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1778 bar Stroke volume 1047 ccm Shot weight (PS) 953 gr. Injection rate 400 ccm/s Screw speed 218 1/min Plasticising rate max. 75 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 35 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads Additional Options: Kodsy Nk Taopfx Ah Aedp - 1 x Air valve - 3 x Core pulls - Robot interface according to Euromap 12

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Kodjuiykdepfx Ah Ajdp

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 504212, clamping force: 5,000 kN, screw diameter: 90 mm, clearance between the columns: 900 mm, injection pressure: 1,742 bar, installation height: 480 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Tie bar distance (h x v): 900 x 800 mm Maximum mold opening distance: 1,170 mm Minimum mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Reverse ejector force: 48 kN Injection Unit Kedsw Dy Rwjpfx Ah Asdp Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight (PS): 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump drive power: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current: 306 A Motor rated current: 170 A Operating voltage: 3 phases Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged upon request for an additional charge.

Condition: excellent (used), Year of construction: 2007, KRAUSS MAFFEI INJECTION MOULDING MACHINE KM 300-1900 C1 Year of manufacture: 2007 Includes: Wittmann W 731 Robot General Description We offer a used injection moulding machine from the renowned manufacturer Krauss Maffei, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system and a modern MC4 control system with color monitor, integrated operator panel, and floppy disk drive. Plasticising Unit Complete plasticising unit for thermoplastics, anti-wear version, equipped with a 60 mm diameter screw, non-return valve, and open nozzle. Technical Data Clamping Unit Clamping force: 3,000 kN Mold opening force: 160 kN Moving platen force: – Opening: 86 kN – Closing: 68 kN Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mold opening stroke: 820 mm Minimum mould height: 330 mm Platen open stroke: 1,150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Injection pressure: 2,420 bar Shot volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Throughput at: – standard speed: 55 g/s – increased speed: 78 g/s Electro-hydraulic System Pump motor power: 55 kW Heater power: 30 kW Number of barrel heating zones: 6 Dry cycle rate (Euromap): 1,350 cycles/h Kdjdpfx Ahow Du Hto Aep Oil tank capacity: 720 l Dimensions and Weight Net weight with control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW Kjdpfx Ahoxqx Avs Aedp

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Daylight opening (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool mounting height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection flow rate: 527 cm3/s Screw speed standard / option: 1/min. 285/349 Screw speed standard or stage 1: 95 PS Ksdpfxsxu Uvao Ah Aedp Screw speed option or stage 2: 117 PS Nozzle clamping force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inches) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with check ring and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm 2726

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: Polypal Type: Stockpal Included in delivery: 1x pallet rack crossbeam, used Material color: orange Box profile: 90 x 50 mm Type: SKVBN 09050CP22 Hooks: 2 HK (hooks) Design: Head crossbeam Clear width: 1,850 mm 2x locking pins, used Design: fully galvanized To secure the longitudinal beams Prevent accidental lifting Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Kdodpfx Ahswlm Nvs Asp This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Scope of delivery includes: 01x pallet rack beam, used Material color: Sendzimir galvanized Kodpsw Utm Sjfx Ah Ajdp Box profile: 80 x 50 mm Beam type: BX 80|50|13 Connector: 5 hooks Clear span: 1,800 mm 02x safety pin, used Design: Sendzimir galvanized For securing the longitudinal beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for pick-up. Any additional transport or shipping of this item will incur extra costs, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: Dexion Type: P 90 Included in delivery: 1x pallet rack crossbeam, used Material color: Sendzimir galvanized Box profile: 120 x 50 mm Crossbeam type: BX 120|50|13 Clamp: 5 HK Clear width: 2,700 mm Max. load per pair of crossbeams: 3,150 kg, with evenly distributed load. (Note bay load) 2x locking pins, used Version: Sendzimir galvanized For securing the longitudinal beams Your contact person in our company: Kdsdpfx Aewffygeh Aep Mr.: Andre Evening Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Scope of delivery includes: 01x pallet rack beam, used Material color: Sendzimir galvanized Box profile: 100 x 50 mm Beam type: BX 100|50|15 Hook: 5 HK Clear span: 1,450 mm 02x safety pin, used Design: Sendzimir galvanized For securing the longitudinal beams Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or dispatch beyond that is subject to additional costs, which can be requested separately depending on the place of delivery or scope of supply. Kodswt Rx Dopfx Ah Ajdp

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Included in delivery: 01x pallet rack beam, used Material colour: sendzimir galvanized Box profile: 100 x 50 mm Beam type: BX 100|50|15 Hook: 5 HK Clear span: 1,140 mm 02x safety pin, used Specification: sendzimir galvanized For securing the longitudinal beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Kdodpfx Ahowufdwe Ajp This item is only available for collection. Transport or shipping is subject to additional costs, which can be provided separately depending on the delivery location or order scope.

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Included in delivery: 01x pallet rack beam, used Material color: Sendzimir galvanized Box profile: 89 x 50 mm Kedpfx Aewucmpsh Aedp Beam type: SLO 089 | 2 Hook: 5 HK Clear width: 1,445 mm 02x safety pin, used Design: Sendzimir galvanized For securing the longitudinal beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. If transport or shipping is required, additional costs will be incurred, which can be clarified separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Included in delivery: 01x pallet rack beam, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Beam type: SLO 089|2 Connector: 5 HK Clear span: 1,140 mm 02x safety pins, used Finish: sendzimir galvanised For securing the longitudinal beams Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: Kjdpjwuf E Iofx Ah Aodp This item is available for collection only. Further transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), Technical data for the pallet rack beam: Racking system: Dexion Type: P 90 Scope of delivery: 01x pallet rack beam, used Material colour: sendzimir galvanised Box profile: 102 x 50 mm Beam type: SLO 102|2 Bracket: 5 HK Clear span: 1,450 mm 02x locking pins, used Design: sendzimir galvanised For securing the longitudinal beams Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Kdodpfx Ajwub Edeh Aop General information about the item: This item is only offered for collection. Delivery or shipping of this item is available at additional cost, which may be quoted separately depending on place of delivery and quantity.

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm Kdjdpfx Ahshy Nnbo Asp DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Kjdpfsxx Uf Aox Ah Aedp

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line including a Kraus Maffei Injection Molding Machine, Model 50/55 CX with Krauss Maffei handling unit, Model LRX 100 (serial 2118838); tray unstacking station; discharge blower, collection device and tray filling station; and Kemapack GmbH strapping/wrapping machine. Kdsdpemn Tu Hefx Ah Aop

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,000 h, clamping force: 1,250 kN, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,500 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details. • Screw diameter: 45.0 mm • Tie Bar spacing: 470 x 470 mm • Shot volume: 275.0 cm3 • 6 heating zones • Hydraulic core Kedpjzk D Nusfx Ah Asdp • Interface: Euromap 12 robot interface • Outer length: 745 mm • Outer width: 770 mm

Condition: used, Year of construction: 1998, Injection moulding machine Krauss Maffei KM 300 1400 C1, year 1998 Control: Mc 3 Ksdpsxuq Rmefx Ah Ajdp Clamping force: 3000 kN Shot weight: 900 g Core pull: 2 Screw diameter: 60 and 70 mm Operating hours: approx. 18,000 h

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 50 - 100 AX injection molding machine Electric injection molding machine Year of production - 2011 Working hours 47799 Operator language: German, Romanian, Czech Closing unit - Mold closing force: kN 500 - Mold opening force: kN 39.9 Kdedpfx Ahev Hxgqe Aop - Dimensions of the mounting plate (hxv): mm 510 X 460 - Distance between columns (hxv): mm 410 X 360 Injection unit - Screw diameter: mm 25 - Injection pressure: bar 2025 - Injection volume: cm3 49 - Injection weight for PS: g 45 Dimensions and weight - Net weight with control cabinet: t 3.9 - Machine dimensions (length x width x height): m 4.13 x 1.6 x 1.8

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Platen size: 540 x 540 mm Tool opening stroke: 350 mm Kdjdpfxezg T I So Ah Asp Minimum tool mounting height: 200 mm Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300 kg