Used Kraussmaffei Krauss Maffei 1000-8000 M for sale (74,220)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 111,569 h, clamping force: 10,000 kN, This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details. • Injection unit • Screw speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s Rcodpfx Amoywlvrogob • Injection measurement stroke: 200 mm forward movement actually used to inject the shot • Metering stroke: approx. 465 mm maximum screw travel during plasticizing • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. −1 K to +2 K • Condition / maintenance relevant data • Machine alignment tolerance:

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 160–1000 CX Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 160–1000 CX Year of Manufacture: 2012 Operating Hours: 57,654 hours Category: Hydraulic Injection Moulding Machine 🔧 Clamping Unit Clamping Force: 1,600 kN (160 tons) Platen Dimensions: 820 × 845 mm Tie-bar Distance: 520 × 520 mm Minimum Mold Height: 300 mm Maximum Opening Stroke: 950 mm 💉 Injection Unit Screw Diameter: 50 mm Injection Volume: 432 cm³ Rcsdpfxjyv E E De Amgeb Shot Weight: 393 g Injection Pressure: 2,304 bar ⚡ Electro-hydraulic System Pump Motor Power: 37 kW Heater Power: 18.7 kW 👉 Option to install Energy Saving System (ESS) – actual energy consumption reduction by up to 30–60% 📐 Dimensions & Weight Machine Weight: 9 tons Dimensions (L × W × H): 5.54 × 2.06 × 2.18 m

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring Rcedpfxjxqhuuj Amgob - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Rodpfxjy Aktmj Amgecb Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g EQUIPMENT Two-component system Kraussmaffei Multinject system Rodey Exdlopfx Amgecb Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 1,470 kN, screw diameter: 50 mm, injection pressure: 2,000 bar, opening stroke: 500 mm, overall weight: 7,000 kg, Offered for sale: Krauss Maffei KM 150-1000 C1 injection moulding machine, year 1997, equipped with WITTMANN W711 Cartesian robot for automatic part extraction. Main specifications: Clamping force: 150 tons (≈1470 kN) Rcjdpoyn Ilvjfx Amgjb Model: KM 150-1000 C1 Year of manufacture: 1997 Includes integrated WITTMANN W711 robot The machine is configured for industrial production and features an automatic handling system with a WITTMANN W711 robot, ideal for processes requiring automatic extraction and reduced cycle times. Suitable for manufacturing medium-sized technical parts in PP, PE, ABS, or other common thermoplastics. Available for inspection in Albacete, Spain. Additional technical information and operational video can be provided upon request.

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 479 g, mold height (min.): 300 mm, Clamping force: 130 t Year of manufacture: 2008 Shot weight: 475.9 g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Shot weight: 475.9 g Clamping force: 130 t Mould platen dimensions: 745 x 745 mm Rcodpfeynzrpox Amgsb Tie bar spacing: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Max. platen distance: 900 mm Weight: 8,000 kg Year of manufacture: 2008 Control: MC5 Equipment: - accumulator - euromap 67 interface - 2 x pneumatic valve - hydraulic core on moving platen

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Rodpfx Aoub S R Homgscb Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2004, Machine located in Germany Rcedpfx Aoytpbvemgjb

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Rodpfx Aexx Uf Ajmgecb

Condition: used, Year of construction: 2006, For sale: KM-200-1000 machine with removal robot, year 2006. The machine is in well-maintained condition and has been serviced by KraussMaffei. Rcsdexurcwjpfx Amgob

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Redpsw U Rcdjfx Amgscb Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: good (used), Year of construction: 2006, operating hours: 65,000 h, clamping force: 2,000 kN, screw diameter: 55 mm, Hydraulic core pull 2x Hot Runner 4x Rodpfxotqifno Amgocb Air valves

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment Rjdeyhbq Eepfx Amgecb • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Rsdpfxsqvuics Amgscb

Condition: used, Krauss Maffei Motherboard Rjdpfeu Axihex Amgjcb

Condition: new, It is new spare parts never used. Krauss Maffei MC 5 display M5V121 new never used Was bought for Krauss Maffei 2300 ton machine. Rcsdpfx Ameygucfsgob M5-Anzeigeeinheit 12Z LxWxH 310x 360x60 mm 3600 g

Condition: refurbished (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC6 TECHNICAL DATA CLAMPING UNIT - injection force: kN 10000 - distance between columns (h x v): mm 1400 x 1120 - distance of mold opening max: mm 1700 - mold installation height min/max: mm 700/1200 - opening stroke of the clamping platen: mm 2400 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT Rcedenh Rhvjpfx Amgob - Screw diameter: mm 95 - Ratio Ls/D: 23 - Injection pressure: bar 1795 - Injection volume: cm3 3367 - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 65 - dimensions of the machine (L x W x H): m 10,98 x 3,29 x 2,49 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: excellent (used), Year of construction: 2016, clamping force: 13,000 kN, Clamping force: 1300 t Screw diameter: 105 mm Distance between tie bars V: 1270 mm Distance between tie bars H: 1570 mm Shot volume: 4546 cm3 Type: Horizontal Drive: Hydraulic KM1300 - 8100 MX Year of manufacture 2016 KM1300MX Rcodpfx Amsy Emurogjb Clamping force ton: 1300 Tie bar distance: 1570 x 1270 mm Mould height min/max: 700/1400 mm Plate dimensions: 2210x1910 mm Opening stroke : 2350 mm Max Daylight Opening : 3050 mm Injection unit Type 8100 MX Screw diameter: 105 mm Max. Injection volume: 4546 cm3 Spec. Injection pressure: 1778 bar Centering ring size: 315 mm Hydraulic cores: 4 + 4 Number of heating sections: 32 for mould Number of cooling circuits: 8+8 Electrical cascades : 12 Cooling: 12 + 12 Hydraulic cicrle hot runner: 1x EUROMAP 6

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder/screw set (1x) • Internal cooling system Rodpfsyyyr Tsx Amgscb • Core pullers (2x)

Condition: ready for operation (used), Year of construction: 2003, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details. Rjdpfx Aeyyxmvomgocb • Stroke volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mold opening force: 220 kN • Travel force (moving plate): opening 105 kN / closing 95 kN • Max. opening stroke: 920 mm • Min. mold height: 380 mm • Max. daylight: 1300 mm • Size of mold platens (H x V): 1060 x 1095 mm • Distance between tie bars (H x V): 710 x 710 mm • Ejector stroke: 250 mm • Ejector force (forward/backward): 95 / 49 kN • Max. mold weight: 4950 kg Additional equipment • Handling system: Wittmann with the following robot travel (X/Y/Z): 420 / 1200 / 2000 mm

Condition: ready for operation (used), Year of construction: 2007, clamping force: 8,000 kN, screw diameter: 85 mm, injection weight: 2,452 g, This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details. Rcedpfx Ameyyxc Dsgeb • Injection unit: 6100 • Injection volume: 2695 cm³ • Injection pressure: 2242 bar • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450°C • Availability: Early 2027 Additional equipment • Handling: Wittmann robot system • Model: W743 • Power: 400 V, 18 A / 12.5 kVA • Axes travel: X 1200 mm, Y 2000 mm, Z 4000 mm

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Screw diameter: 135 mm Rcsdpfxeyh I Ems Amgeb Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 9662 cm3 Type: Horizontal Drive: Hydraulic

Condition: like new (used), Year of construction: 2023, clamping force: 1,700 kN, Clamping force: 1700 t (increased) Screw diameter: 105 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 3721 cm3 Rsdpjy Uk Emjfx Amgscb Type: Horizontal Drive: Hydraulic KUKA ROBOT 6 axes Machine like new!

Condition: excellent (used), Year of construction: 2014, clamping force: 2,500 kN, Equipment: documentation/manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 KN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Opening stroke (max.): 630 mm 5. Mould height (min. / max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Injection speed (max.): 120 mm/s Ejector System Redpfjxqhfyox Amgocb 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Equipment of the machine:_ 1. BluePower servo pump drive system (energy-efficient servo-hydraulics) 2. Hydraulic core pull 1× on operator side \+ pressure release system 3. 8-fold water battery with magnetic valve shut-off 4. Hot-runner control 4 zones (ZE 88.5404) 5. MC6 control with 19″ Touch TFT screen 6. PV-control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. BluePower energy-saving servo drive system LRX 150 linear robot (payload < 15 kg), incl.: 1. X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm 2. B-servo / C-pneumatic rotation axes 3. Full integration (MC6 control interface) 4. Safety package – fencing, emergency stop, key switch 5. Vacuum circuits × 4 (Venturi) 6. Transport conveyor interface & control circuit 7. CE conformity declaration for integrated system (IMM + Robot) 8. Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084