Used Kremlin Flowmax 16 - 120 F for sale (49,317)

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = compressed air, Material/air ratio = 16:1, Material pressure max. 90 bar, Air inlet pressure 1 to 6 bar, 4 double strokes for 1 liter of material, with gun type MX with double hose, Djdpfxsiv Huws Ad Necg unused since last service 01/20, condition as seen, ex stock Seevetal, subject to prior sale

Condition: ready for operation (used), machine/vehicle number: 06G1062, Drive = compressed air, Material/air ratio = 17:1, Material pressure max. 110 bar, Air inlet pressure 1 to 7 bar, Delivery rate per double stroke 60 cm³ with gun type MX with double hose, unused since last service 01/20, condition as inspected, ex stock Seevetal, subject to prior sale Djdpfx Adoiv Ht Is Njcg

Condition: used, mileage: 16,757 km, power: 168 kW (228.42 HP), first registration: 02/1990, overall weight: 13,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, Iveco 120-23 AW V8 diesel as a 16/25 TLF with 0l water tank +++ Originally only 16,754 km V8 naturally aspirated diesel with 12.7L displacement 4x4 all-wheel drive with low-range gear 6-speed manual transmission 2x differential locks (center and rear) 9 seats Dsdpex A N Tpsfx Ad Nocg 10Rx22.5 tires Magirus body 16/8 Magirus rear pump Extremely well maintained and ready for immediate use +++ Errors, changes, and prior sale reserved

Year of construction: 2004, condition: like new (used), Rabolini F 120 x 162 ref 2995 year 2004 max sheet size 120 x 162 cm pneumatic clutch and brake counter overhead panel control Dcjdpey E Hkmsfx Ad Nog hard cutting plate central lubrication quick action chase condition – very good

Condition: used, mileage: 50,000 km, power: 174 kW (236.57 HP), first registration: 01/1992, fuel type: diesel, overall weight: 12,500 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,750 mm, color: blue, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 16, Equipment: additional headlights, all wheel drive, cabin, cable winch, differential lock, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, auxiliary heating, switch 6, differential lock, rotating beacon, storage box, cable winch, leaf suspension, tow bar air+light, U-protection Wheelbase: 3750 mm Body: Box body with roller shutters and benches for 10 people on loading area, ARCHIVE PHOTOS! Ex-THW! Body length approx. 3800 mm! Double cab, box body with roller shutters, 5t Rotzler cable winch at the front. On request also with 160hp for 2.000,- EUR less! Dedsvhkwqjpfx Ad Nocg Spare wheel available for an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss Dcjdpfedzqn Uox Ad Neg All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, mileage: 405,500 km, first registration: 11/2018, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, Air conditioning, light blue color, Euro 6 engine, ABS, disc brakes, on-board computer, electric windows, specification upon request, EBS, air suspension, radio, SOLD AS IS Dodpfxexaggbo Ad Njcg

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Specifications: - Type of saw : Friction Dcjdpfx Adsvtpp Nj Nog - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 - Max. speed : 120 m/min - Length tolerance : +/-2 mm Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Material thickness: 1 – 6 mm Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 537 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes Dcodpoxaalksfx Ad Neg - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Djdpfx Adoxaabls Nocg Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: used, color: other, first registration: 12/2003, Year of construction: 2003, Serial number: 27.50.744.146 We have a stock of >100 axles. Dcodex Nf H Uopfx Ad Neg Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 12/2003, Year of construction: 2003, Serial number: 27.50.744.145 We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Dcsdpfxex Nf Hbs Ad Njg

Condition: used, color: other, first registration: 12/2003, Year of construction: 2003, Serial number: 27.50.744.145 We have a stock of >100 axles. Dcjdox Nf Edopfx Ad Nsg Please contact us if you can't find what you are looking for.

Condition: new, gearing type: other, driver cabin: other, Vehicle location: Bovenden, BPW Achsen Body: Axles, drum braked 2 x available, price per axle! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dcsdpfx Adoi Rnxxj Neg - .

Condition: used, mileage: 31,923 km, power: 150 kW (203.94 HP), first registration: 03/1990, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,100 mm, loading space length: 3,700 mm, loading space width: 2,480 mm, loading space height: 1,750 mm, Year of construction: 1989, Equipment: ABS, all wheel drive, 1200L water tank +++Quick attack rear right with jet pipe 6-cylinder inline diesel engine with turbocharger and intercooler, 6-speed manual transmission 4x4 all-wheel drive with selectable low-range gear ABS, fog lights 2x differential locks: center and rear (rear axle + transfer case) 1x auxiliary drive: 1x for the rear FP16/8 pump Very well-maintained fire engine with Ziegler body Dcedpfx Aswfbhaod Neg Ziegler 16/8 rear pump with quick attack rear right 9 registered seats, 2 prepared for breathing apparatus wearers GVW: 12,000 kg according to documents Exterior dimensions: 3,700 x 2,480 x 1,750 (L x W x H in mm) Interior dimensions of rear cab (from driver's seat): 1,700 x 2,000 x 1,540 (L x W x H in mm) Wheelbase (Wheelbase): 3640 mm Tires: 9 R x 22.5 Maximum speed: 90 km/h (GPS) Vehicle runs well and is ready for immediate use. +++ Errors, changes, and prior sale reserved +++ ? 034 ?

Condition: used, machine/vehicle number: 16389, Year of construction: 2018, operating hours: 7,930 h, load capacity: 2,000 kg, lifting height: 150 mm, load center: 800 mm, fork length: 1,600 mm, enginetype: Electric, manufacturer: Jungheinrich Dcodpfoxfd Aqox Ad Nog

Condition: good (used), mileage: 782,543 km, first registration: 02/1992, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, total length: 5,900 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1992, = Further Options and Accessories = - Aluminum fuel tank - Leaf suspension Djdpfxjuxyc Io Ad Necg - Air suspension - Sleeper cab - Sun visor = Remarks = Volvo F16.500 Globetrotter 4x2 – Fully renovated – Volvo Demo colors – New paint – Perfect condition Year: 28-02-1992 Mileage: 782,543 km VIN: YV2H3A6A8NA369308 Registration: 76-BTB-7 Volvo in perfect condition New paint – Volvo Demo colors Interior like new Air suspension 3.60 m wheelbase Telma retarder Cruise control Double bed Electric windows Air horn Additional lights Visit our website for all photos and details: = Further Information = Technical Information Number of cylinders: 6 Engine capacity: 16,115 cc Transmission: Volvo manual gearbox Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Tire tread left: 70%; Tire tread right: 70%; Suspension: Leaf spring Rear axle: Tire size: 295/80R22.5; Dual-mounted; Max. axle load: 11,500 kg; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Weights Unladen weight: 8,000 kg Payload: 11,000 kg Gross vehicle weight: 19,000 kg Functional Body manufacturer: Volvo Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Identification License plate: 76-BTB-7

Condition: new, functionality: fully functional, overall weight: 17 kg, 7 units in stock. Various models available. Export possible. Djdpfx Adjyyp Tmj Nocg

Condition: used, Year of construction: 2007, operating hours: 70,000 h, clamping force: 120 kN, displacement volume: 154 cm³, injection pressure: 2,175 bar, overall weight: 7,300 kg, screw conveyor diameter: 35 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC Tech + ERC23/1-F Condition: aus laufender Produktion Operating hours: ca. 70.000 CLAMPING UNIT: - Clamping force: 120 t Öffnungsweg: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 790 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Einspritzdruck: 2.175 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Engel integrated Other equipment: inkl. ERC 23/1-F mit integrierten Ablageband (Bediengegenseite) +750mm, Nadelverschluss (hydr. + pneumat.), Schnittstelle Farbdosierer und Temperiergerät. GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Dcedpjqy Ukljfx Ad Nog Total installed power: Motor + Heizung Total weight: 7.300 kg Total size L x B x H: 4,4 x 1,4+0,8 x 2,0 m

Condition: used, Mounting rails, sliding set, pipe clamps, pipe fastening, pipe clamp holder, WBD holder, clamping bracket, U-holder -Manufacturer: Sikla, 15 pieces of clamping brackets for attaching carrier profile F -Type: SB F 100-16 .: 113 082 Dcedpfx Asq Syuqed Nsg -Price/tax: complete -Dimension: 160/130/H30 mm -Weight: 0.7 kg/pc.

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho Dodpjcnxa Nofx Ad Nocg

Condition: used, mileage: 14,700 km, power: 125 kW (169.95 HP), first registration: 06/1970, fuel type: diesel, empty load weight: 7,100 kg, maximum load weight: 4,400 kg, overall weight: 11,500 kg, tire size: 8.25-20 PR 14, axle configuration: 4x4, wheelbase: 3,750 mm, next inspection (TÜV): 10/2026, brakes: engine braking, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 9, Year of construction: 1970, front tire size: 8.25-20 PR 14, rear tire size: 8.25-20 PR 14, Equipment: all wheel drive, Vehicle location: Bovenden Wheelbase: 3,750 mm Body: 1,600 L water tank, Klöckner H-Deutz LF 16 Dedpoxxmqqofx Ad Necg F Magirus 170 D 11FA Year of manufacture: 1970 Pump capacity: 1,600 L/min Tank capacity: L Crew: 9 personnel including driver Brake type: Air/hydraulic, engine brake The vehicle was in use as a company/plant fire engine from 1997 to 2025. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, mileage: 17,500 km, power: 159 kW (216.18 HP), first registration: 12/1987, fuel type: diesel, empty load weight: 7,600 kg, maximum load weight: 4,400 kg, overall weight: 12,000 kg, tire size: 10R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 9, Equipment: ABS, cabin, differential lock, fog lights, trailer coupling, Vehicle location: Bovenden, Doka, 1x air seat, switch 5, ABS (anti-lock braking system), power take-off, differential lock, fog lights, rotating beacon, storage box, leaf suspension, trailer hitch Wheelbase: 3600 mm Body: TLF16/25 tank fire-fighting vehicle, built-in pump FP 16/8 & 2500l water tank Body length approx. 3700mm! Spare wheel available for an extra charge! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dcjdpfx Adsvhknvj Njg - .

Condition: used, mileage: 73,045 km, power: 169 kW (229.78 HP), first registration: 07/1992, fuel type: diesel, empty load weight: 7,660 kg, maximum load weight: 4,340 kg, overall weight: 12,000 kg, tire size: 10R22.5, axle configuration: 4x2, wheelbase: 3,650 mm, color: red, driver cabin: other, gearing type: automatic, emission class: none, suspension: steel, number of seats: 6, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, trailer coupling, Vehicle location: Bovenden, automatic, differential lock, fog lights, driving lights, work lights, rotating beacon, stowage box, leaf suspension, U-protection, Doka Wheelbase: 3650 mm Body: LF 16/18 fire-fighting vehicle with built-in pump & 1600l fire-fighting water tank Body length approx. 3700mm! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dodpfx Aovhkhijd Necg - .

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Dcjdev Ntbuspfx Ad Nsg Device Charger Charging cable Allen key Safety goggles Plastic cover Operating instructions This device is an unused display unit.