Used Kukko Puller 12-2 Clamping Jaw, Opening Width 125 Mm - 1 Pc for sale (144,843)

Condition: new, Puller 12-2, Spanning dimension 125mm, Spanning width 150mm, 9 t, KUKKO · Three-arm design · With pre-adjustable spanning dimension Ljdpfo Ab Iv Dex Amzohn · Robust puller with excellent clamping action for removing ball bearings, gears, pulleys, etc. · With slim puller hooks for hard-to-reach locations · The required width is adjusted using the key · Slipping of the hooks from the parts to be removed is impossible Application: for removing particularly stubborn ball bearings, gears, pulleys and similar parts · Other technical features: Weight: 1.72 kg Spanning depth: max. 125 mm Spanning width: 150 mm

Condition: new, Puller 20-2, Spanning range 150 mm, Spanning width 160 mm, 6 t, KUKKO · Two-arm design · With sliding, always parallel puller hooks · Special steel · With a robust spindle for high clamping force and a crossbar with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adaptation of the spindle to the shaft by means of a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by rotating the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 3.01 kg Lhedpfxo Ab Azzs Amzsn · Material: Special steel Spanning range: max. 160 mm Material: Special steel Spanning depth: max. 150 mm

Condition: new, Puller tool 204-02, clamping diameter 100 mm, clamping width 90 mm, lateral clamping jaw, KUKKO · With lateral clamping jaw · Indispensable for removing flush-mounted ball bearings, bearing rings and similar parts in precision mechanics, electrical workshops, and for pneumatic maintenance, etc. · The claws of the puller hook engage under the part to be pulled when the clamping jaw is tightened, releasing it even before the actual pulling process begins. · Other technical features: Weight: 1.99 kg · Design: lateral clamping jaw Lsdpfs Ab Iz Hox Amzehn Clamping depth: max. 100 mm Clamping width: max. 90 mm

Condition: new, Puller 110-3, clamping depth 200 mm, clamping width 250 mm, KUKKO · Two-arm design Ledpfxe Ab Ax Ts Amzehn · Pulling hook is consistently straight and uniformly slender · Reversible hooks for both external and internal pulling operations · Hooks are secured with a pin to prevent them from falling out; the securing pin can be released by pressing a button, allowing the hooks to be repositioned for internal or external pulling. By switching the arms, the puller can also be used as an internal puller. · Other technical features: weight: 4.88 kg Clamping depth: max. 200 mm Clamping width: max. 250 mm

Condition: new, Puller 20-10, clamping depth 100 mm, clamping width 120 mm, 4.5 t, KUKKO · Two-arm design · With sliding puller hooks that remain parallel · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adaptation of the spindle to the shaft via a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by inverting the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: weight: 1.42 kg · Material: special steel Clamping depth: max. 100 mm Ljdpfx Aj Ab Azujmzehn Material: special steel Clamping width: max. 120 mm

Condition: new, Pulling tool 204-0, clamping type, clamping depth 70 mm, clamping width 50 mm, lateral clamping clamp, KUKKO · with lateral clamping clamp · indispensable for removing flush-fitting ball bearings, bearing rings and similar parts in precision mechanics, electrical workshops, and for pneumatic maintenance, etc. · the claws of the pulling hooks engage under the part to be pulled when the clamping clamp is tightened, releasing it even before the actual pulling process · Further technical characteristics: weight: 0.69 kg · Design: lateral clamping clamp Clamping depth: max. 70 mm Lhsdpfx As Ab Izyemzen Clamping width: max. 50 mm

Condition: new, Puller 20-2+ with tensioning bolt, 150 mm clamping depth, 160 mm clamping width, 6 t, KUKKO · Two-arm design · With quick adjustment Lhode Ab Ayqopfx Amzen · Made of high-quality tool steel · With a knurled handwheel for quick release and adjustment of the puller hooks without a wrench · Optimal adjustment of the spindle to the shaft through a two-sided spindle tip (ball and point) Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 3.05 kg · Material: High-quality tool steel Clamping depth: max. 150 mm Material: Special steel Clamping width: max. 160 mm

Condition: new, Puller tool 204-3, clamping width 140 mm, clamping range 150 mm, lateral clamping jaw, KUKKO · With lateral clamping jaw · Indispensable for removing flush-fitting ball bearings, gears, sprockets, steering levers and similar parts · The clamping jaw presses the puller hooks firmly against the part to be removed · Other technical specifications: weight: 3.16 kg · Design: lateral clamping jaw Clamping depth: max. 140 mm Clamping range: max. 150 mm Lhjdpfxs Ab I Ako Amzon

Condition: new, Puller 30-2, clamping range 150 mm, clamping width 160 mm, 7 tons, KUKKO · Three-arm design · Made of special steel · Robust design · Three-arm pullers guarantee a particularly secure grip on the parts to be removed due to the even load distribution and enable centric pulling · The puller can also be used as an internal puller by repositioning the puller arms. Application: for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by rotating the puller arms · Also suitable for removing asymmetrical workpieces · Other technical specifications: Weight: 3.82 kg Ledpfxj Ab Iwnj Amzshn · Material: Special steel Clamping range: 160 mm Material: Special steel Clamping depth: max. 150 mm

Condition: new, Puller 20-3, Spanning width 200 mm, Spanning length 250 mm, 8.5 t, KUKKO Lhedpfxo Ab A Afj Amzen · Two-arm design · With sliding puller hooks that remain parallel at all times · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adaptation of the spindle to the shaft thanks to a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable for removing ball bearings, bearings, gears, etc. · Can be used as both an external and internal puller by rotating the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: weight: 7.12 kg · Material: special steel Material: special steel Spanning width: max. 250 mm Spanning depth: max. 200 mm

Condition: new, Puller 20-20, clamping depth 150 mm, clamping width 200 mm, 6 tons, KUKKO · Two-arm design · With sliding puller hooks that remain parallel · Made of special steel · With a robust spindle for high clamping force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adaptation of the spindle to the shaft through a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: weight: 3.22 kg · Material: special steel Lhedpo Ab Az Ujfx Amzjn Clamping depth: max. 150 mm Clamping width: max. 200 mm Material: special steel

Condition: new, Puller tool 204-2, clamping range 100 mm, clamping width 100 mm, lateral clamping jaw, KUKKO * with lateral clamping jaw * indispensable for removing flush-fitting ball bearings, gears, sprockets, steering column levers and similar parts * the clamping jaw presses the puller hooks firmly against the part to be removed * Other technical features: weight: 2.04 kg * Design: lateral clamping jaw Clamping depth: max. 100 mm Clamping width: max. 100 mm Ledpfx Ao Ab I Adsmzshn

Condition: new, Puller set KS-2030, 8-piece - Two-/three-arm design with quick adjustment, featuring slim puller hooks - For use in tight spaces - Optimal spindle adjustment to the shaft via a double-sided spindle tip (ball and point) Lede Ab Azbopfx Amzehn Clamping depth: max. 100 / 200 mm Clamping width: max. 90 mm

Condition: new, Puller 45-2, clamping range 120 mm, clamping width 120 mm, 6 t, KUKKO * Three-arm design * Equipped with force-multiplied, self-centering puller hooks * Particularly suitable for removing tightly fitted gears, sprockets, ball bearings, pulleys, etc. Application: for removing gears, sprockets, ball bearings, pulleys, etc. that are particularly difficult to remove. * Other technical features: Weight: 1.12 kg Lsdpfxj Ab A Eaj Amzshn Clamping range: max. 120 mm Clamping depth: max. 120 mm

Condition: new, Puller 11-1-A, clamping depth 200mm, clamping width 520mm, 20 t, KUKKO · Three-arm design · Equipped with sliding puller arms that remain parallel at all times · Made of special steel · Extra-strong design for particularly high loads · The parallel adjustment ensures that the parts always rest on the large contact surfaces of the puller hooks, allowing for gentle removal · The puller can also be used as an internal puller by repositioning the puller hooks Application: for removing heavy pulleys, gears and similar parts · Can be used as an external and internal puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: weight: 22.72 kg · Material: special steel Clamping depth mm: max. 200 Material: special steel Lhodpfx Amj Ab Iw Uezen Clamping width mm: 520

Condition: new, Puller set K-2030, 11-piece - Spanning width: 120 mm - Spanning depth: 100-350 mm KUKKO - Two- or three-arm design - With extra-slim puller hooks - For tight spaces Application: for removing gears, bearings, sprockets and synchronizer sleeves - Can be used as an external and internal puller by rotating the puller hooks - Also suitable for removing asymmetrical workpieces - Other technical features: Weight: 8.92 kg Lsdj Ab A Hkjpfx Amzjhn Spanning depth: max. 100 / 200 / 250 mm Spanning width: max. 120 mm

Condition: new, Puller 12-3, clamping range 165mm, span 200mm, 10 t, KUKKO · Three-arm design · With pre-adjustable clamping range · Robust puller with excellent clamping action for removing ball bearings, gears, pulleys, etc. · With slim puller hooks for hard-to-reach areas · The required width is adjusted using the wrench · Slipping of the hooks from the parts to be removed is impossible Application: for removing particularly stubborn ball bearings, gears, pulleys and similar parts · Other technical specifications: Weight: 3.5 kg Clamping depth: max. 165 mm Lhsdpfx Ams Ab Iv Rozsn Span: 200 mm

Condition: new, Puller 11-2-A, clamping depth 200mm, clamping width 650mm, 20 tons, KUKKO · Three-arm design · With sliding puller arms that remain parallel · Made of special steel Lhjdpfxs Ab Ixfo Amzen · Extra robust design for particularly high loads · Thanks to the parallel adjustment, the parts always rest on the large contact surfaces of the puller hooks and are removed gently · The puller can also be used as an internal puller by repositioning the puller hooks. Application: for removing heavy pulleys, gears, and similar parts · Can be used as an external and internal puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 25 kg · Material: Special steel Material: Special steel Clamping depth mm: max. 200 Clamping width mm: 650

Condition: new, Puller 20-10-SP, Clamping depth 100/200/250 mm, Clamping width 120 mm, 2.5 t, KUKKO * Two-arm design * With extra-slim puller hooks * For tight spaces * For removing gears, bearings, sprockets, etc. * Application: for removing gears, bearings, sprockets, and synchronizer sleeves * Can be used as an internal and external puller by rotating the puller hooks * Also suitable for removing asymmetrical workpieces * Other technical specifications: Weight: 3.69 kg Ledpfx Ae Ab A Hdjmzjhn Clamping depth: max. 100 / 200 / 250 mm Clamping width: max. 120 mm

Condition: new, Puller 12-1, clamping depth 100 mm, clamping width 100 mm, 8 t, KUKKO · Three-arm design · With pre-adjustable clamping range · Robust puller with excellent clamping action for removing ball bearings, gears, pulleys, etc. · With slim puller hooks for hard-to-reach areas · The required width is adjusted using the wrench · Slipping of the hooks from the parts to be removed is impossible Application: for removing particularly stubborn ball bearings, gears, pulleys and similar parts · Other technical features: weight: 1.24 kg Clamping depth: max. 100 mm Clamping width: 100 mm Lhedj Ab Ivwepfx Amzon

Condition: new, Puller 20-1, clamping depth 100 mm, clamping width 90 mm, 4.5 tons, KUKKO · Two-arm design · With sliding puller hooks that remain parallel at all times · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle pulling · Optimal adaptation of the spindle to the shaft thanks to the two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by rotating the puller hooks Lhodpj Ab Aznefx Amzon · Also suitable for removing asymmetrical workpieces · Further technical features: weight: 1.31 kg · Material: special steel Clamping depth: max. 100 mm Material: special steel Clamping width: max. 90 mm

Condition: new, Puller 20-20+ Clamping distance 150 mm Clamping width 200 mm 6 t KUKKO · Two-arm design · With quick adjustment · Made of high-quality tool steel · With hand-operated knurled wheel for quick release and adjustment of the puller hooks without a wrench · Optimal adaptation of the spindle to the shaft due to a two-sided spindle tip (ball and point) Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by rotating the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 3.32 kg · Material: High-quality tool steel Ledps Ab Aywefx Amzohn Material: Special steel Clamping distance: max. 200 mm Clamping depth: max. 150 mm

Condition: new, Puller 30-1, clamping depth 100 mm, clamping width 90 mm, 6 tons, KUKKO · Three-arm design · Made of special steel · Robust construction · Three-arm pullers guarantee a particularly secure grip on the parts to be removed due to the even load distribution and ensure centric pulling · The puller can also be used as an internal puller by repositioning the pulling hooks. Ledpfe Ab Iwbsx Amzehn Application: for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by rotating the pulling hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 1.53 kg · Material: Special steel Clamping depth: max. 100 mm Clamping width: 90 mm Material: Special steel

Condition: new, Puller 30-10, clamping range 100 mm, clamping width 120 mm, 6 t, KUKKO · Three-arm design · Made of special steel · Robust construction · Three-arm pullers guarantee a particularly secure grip on the parts to be removed and a centric removal due to the even load distribution · The puller can also be used as an internal puller by repositioning the pulling hooks Application: for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by rotating the pulling hooks · Also suitable for removing asymmetrical workpieces Lhjdpfx Ams Ab Iwhszsn · Other technical features: Weight: 1.59 kg · Material: Special steel Material: Special steel Clamping depth: max. 100 mm Clamping width: 120 mm

Condition: new, Puller tool 204-1, clamping diameter 90 mm, clamping width 80 mm, lateral clamping jaw, KUKKO · with lateral clamping jaw · indispensable for removing flush-fitting ball bearings, gears, sprockets, steering column levers and similar parts · the clamping jaw presses the puller hooks firmly against the part to be removed · Further technical specifications: Weight: 1.39 kg · Design: lateral clamping jaw Clamping depth: max. 90 mm Ljdpfx Amo Ab Iz Tezohn Clamping width: max. 80 mm