Used Länge Rohr: 650 Mm/ Compartment Divider for sale (74,280)

Condition: good (used), The scope of delivery includes: 01x compartment divider, used Material color: grey white total length: approx. 775 mm Length tube: 650 mm + 5 mm plastic cap cross section: square tube 20 x 20 mm opening dimension: approx. 103 mm Weight: 0,93 kg | pcs. Klsdpfx Asi Eu Dvjfdsr

Condition: good (used), shelf length: 5,330 mm, shelf height: 2,278 mm, Technical data for the shelving rack: Racking system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rack rows: 01 unit Rack length: approx. 5,330 mm Number of bays per row: 04 units of 1,295 mm each Number of levels incl. dividers: 04 units Number of levels plus base level: 02 units Scope of delivery includes: 05x Upright frames, new Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including horizontal bracing and foot plates Uprights are pre-assembled 2,278 mm high 800 mm deep 24x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,295 x 790 x 40 mm Weight per unit: approx. 12.82 kg 48x Free-standing dividers, used Total depth: 765 mm For upright depth: 800 mm Total height: 315 mm Usable height: 275 mm Material finish: Sendzimir galvanized 02x Cross bracing, used Designation: KV31313 Material finish: Sendzimir galvanized 01x Load sign With specifications for bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Kedpsw H Sk Hofx Afdelr General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply. These can be requested from us separately, depending on the delivery location and scope.

Condition: used, Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar slewing crane, indoor crane, workstation crane, chain hoist -Crane cross member: adjustable, for the transport of different loads -Load capacity: 6500 kg Kedpsg Dvyqjfx Afdjlr -Hook spacing: min. 1460 mm / max. 2880 mm -Steel rope: O 22 mm, length 1580 mm -Dimensions: 3025/190 / H945 mm -Net weight: 230 kg

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.650 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately Kjdehwduxepfx Afdslr depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: ready for operation (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here a used CS Sigma profile for sale. The indicated price refers to a price per piece. Included in delivery is: 01x CS Sigma profile, used material colour: cream white profile length: approx. 2.200 mm Kledogfbyzjpfx Afdjr CS profile dim.: approx. 150 x 50 x 15 mm material thickness: approx. 2,25 mm weight / pcs.: approx. 10,500 kg The CS Sigma profiles can be bent, or show slight damage or slight damage or rust. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 32,880 mm Number of bays / row of shelves: 09 pcs. 2,880 mm each Number of levels plus floor level: 03 pcs. The scope of delivery includes 12x pallet rack uprights, used Material color: green Upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces and load distribution plate Total length: approx. 930 mm Internal width: approx. 102 mm The uprights are pre-assembled ( welded framework ) 3,650 mm high 870 mm deep 66x pallet rack cross beam, used Material color: green INP profile: 80 x 42 mm clear width: 2,880 mm max. load per pair of beams 1,600 kg with evenly distributed load 132x locking pin, used Version: completely galvanized For securing the longitudinal beams against unintentional lifting out 48x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 24x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven ground 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Currently available from stock: approx. 05 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: Klodpfx Ajtr Unfjfdjr This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 1,056 mm Number of bays per shelf row: 01 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled 2,278 mm high 400 mm deep 08x Shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight per unit: approx. 4.65 kg Max. load per shelf 200 kg with evenly distributed load Kjdsttl Euepfx Afdolr 21x Freestanding shelf dividers, second-hand Designation: TRF 44 27 Material color: sendzimir galvanized Clear shelf height: 291 mm 02x Side panel, second-hand Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 275 mm 01x Cross brace, second-hand Designation: KV31013 Material color: sendzimir galvanized Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x truss struts, used Kljdpfx Aei Dxxlofdor Manufacturer: Mecalux Material color: blue length: approx. 1.057 mm dimension center-center drill hole: approx. 997 mm Ø drill hole: approx. 10.5 mm Cross section: C 40x25x8 mm Weight: 1.150 kg | pcs. General information about the article: This article is offered for pick-up only. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: like new (used), Estimated stock: approx. 840 units. We are offering a second-class truss brace from the manufacturer SSI Schäfer for sale. Technical specifications for the truss brace: Shelf system: SSI Schäfer Type: PR 600 Included in delivery: 1x truss brace, second-class Material color: Sendzimir galvanized Total length: approx. 1,270.0 mm Center-to-center hole: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per unit: approx. 1.35 kg Klodpfx Ash Eg Agefdor General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: excellent (used), We offer here II. Choice truss brace of the manufacturer SSI Schäfer for sale. Technical data of the truss brace: Shelving system: SSI Schaefer Type: PR 600 Included in delivery: 01x truss brace, II. choice Kodpfx Ajh Eg Anefdjlr Material color: sendzimir galvanized total length: approx. 1.208,8 mm center-center-hole: approx. 1.168,8 mm profile dimension: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm material thickness: approx. 1.25 mm General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: ready for operation (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here a used CS Sigma profile for sale. The indicated price refers to a price per piece. Included in delivery is: 01x CS Sigma profile, used material colour: cream white profile length: approx. 2.000 mm CS profile dim.: approx. 150 x 50 x 15 mm material thickness: approx. 2,25 mm weight / pcs.: approx. 10,000 kg The CS Sigma profiles may be bent, or have slight damage or rust slight damage or rust. Kjdpfx Afsgfbytjdslr Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), The scope of delivery includes: 01x truss struts, used Manufacturer: Mecalux Material color: blue length: approx. 851 mm dimension center-center drill hole: approx. 795 mm Ø drill hole: approx. 10.5 mm Cross section: C 40x25x8 mm Weight: 0,930 kg | pcs. Klodpfx Afji Dx Iiedor General information about the article: This article is offered for pick-up only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data for the extension lugs: Manufacturer: Jung Heinrich Type: MPB Kedsipt Ddspfx Afdslr Included in delivery are 02x extension lugs, used total length: approx. 400 mm total width: approx. 129 mm inside width: approx. 121 mm f. Frame profile width: approx. 120 mm Depth: approx. 49 mm material thickness: approx. 4,00 mm hole spacing i. d. depth: approx. 100 mm hole grid i. d. width x height: approx. 85 x 100 mm Drill hole Ø: approx. 10 mm Material color: blue Weight / pcs.: approx. 2,59 kg Note: No screw material included in delivery.

Condition: good (used), We are offering you a second-quality truss brace from the manufacturer SSI Schäfer for sale. Technical specifications for the truss brace: Shelf system: SSI Schäfer Type: PR 600 Kjdoh Eg Acepfx Afdelr Included in delivery: 1x truss brace, second-quality Material color: Sendzimir galvanized Total length: approx. 1,304.4 mm Center-to-center hole: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per piece: approx. 1.38 kg General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: excellent (used), We offer here II. Choice truss brace of the manufacturer SSI Schäfer for sale. Technical data of the truss brace: Shelving system: SSI Schaefer Kledpfoh Eg Akox Afdjr Type: PR 600 Included in delivery: 01x truss brace, II. choice Material color: sendzimir galvanized total length: approx. 1.249,2 mm center-center-hole: approx. 1.209,2 mm profile dimension: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth Kljdpfxjmhhypj Afdjr 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Kodpfjmhh Dhex Afdjlr - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Kjdsmhh Dzspfx Afdolr The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Kljdpemhhx Iofx Afder Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg Klsdjmhhyaspfx Afdsr - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard Kodpfsh Ek Dasx Afdolr = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Kedpfx Afomhh Anodjlr Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Kjdemhhf Sopfx Afdslr - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Kljdpfjmhhl Hox Afdsr Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg Kledpfx Asmidyfefdsr - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.