Used Löwer Single Wood Sander for sale (17,867)

Condition: used, Year of construction: 1985, used cleaned, function checked, test run, partly revised, new ball bearing manufactured by Maweg type Saturn D built in 1985 Masch.-No. 85-12-018 number of band aggregates 2 piece number of Finishaggregate 2 piece motors 4 kW sanding width ca. 150 mm sanding height ca. 150 mm belt oscillation band blow out feed speed 4 - 16 m/min. belt length ca. 1800 mm belt width ca. 200 mm height indicator  digital - mechanical Siko Ljdovwfalopfx Akusrl adjustment electrical fixed sanding pad 2-belt table height constant lateral moveable exhaust connection D 4 x 80 mm required space ca. l x w x h mm 2000 x 1200 x 2000 located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 1975, with new feed carpet, not installed second hand Make Löwer Type RSM 280 S Year of construction 1975 Machine no. 3528 Number of belt units 1 piece Engines 5.5 hp Sanding width approx. 140 / 150 mm Grinding height approx. 120 mm band oscillation tape blow-off Feed speed 6 / 11 / 16 m/min. Band length approx. 1600 mm Band width approx. 160 mm Extraction connection D 100 mm Space requirement approx. LxWxH mm 1400x1000x1600 Weight approx. 650 kg Storage location 97447 Gerolzhofen Lrsdpfxovwgczo Akusl Handover in the current condition as seen without guarantee and guarantee - free loaded -

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. Lodeq Nfuzjpfx Akujrl 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Lsdpfxsx Twcpe Akusrl

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!) Lodpfx Aewyda Ujkujrl

Condition: used, Year of construction: 2004, machine/vehicle number: 1609, The BACCI FC 8CN machine is an advanced device for copying, milling and grinding wooden elements, This model is equipped with 8 working heads, which allows for simultaneous performance of many machining operations. Numerical control (CNC) allows for precise machine setting and ease of programming. Thanks to this, operators can quickly adapt the machine to various tasks, which increases productivity. - Maximum machining length (X axis): 2500 mm - Unit strokes: A, B, C, D, U, V, W axis Z: 370 mm - Work table tilt angles: -10°, 0°, 10° - Maximum vertical spindle stroke: 20 mm - Spindle diameter: 40 mm Maximum tool size: - Diameter x Height: 160 x 180 mm - Sandpaper dimensions (L x W): 2360–2400 x 180 mm Spindle speeds: - Spindles 1-A and 2-B: 8500 rpm - Spindles 3-C, 4-D, 5-U, 6-V, 7-W, 8-Z: 500–8500 rpm Aggregates: - Milling units (1-8): with 15 HP motors Power and air requirements: Lrsdpfxswptnys Akujl - Total installed power: 120 kW - Air pressure: 6 bar Machining capabilities: - Maximum machining length (with standard roundings): 250 mm - Maximum machining width (with roundings): 500 mm - Maximum machining height: 180 mm Speeds and acceleration: - Maximum table feed speed: 30 m/min - Maximum table return speed: 100 m/min - Maximum unit acceleration: 5 m/sec Additional functions: - Control system: OSAI - Machine weight: approx. 8500 kg - Windows 2000 Professional - machine cabinet (housing) Dismantling on the Buyer's side The price given is a net price

Year of construction: 1990, condition: good (used), Throwing fan ideal for wood chips, with feed conveyor belt approximately 3 m long. Blade span 900 mm, equipped with 11 kW motor. Ljdpfx Aeyy Uzcjkujrl

Condition: new, Year of construction: 2026, The CORMAK MM2315 230V woodworking sander is a high-performance oscillating edge sander designed for precise machining of flat and curved surfaces. Its construction is based on a stable sanding unit with an oscillation function and an adjustable work table, enabling effective and even sanding even under heavy workloads. It is an ideal solution for professional carpentry shops and production facilities expecting reliability, versatility, and high-quality finishing. Key Advantages Belt oscillation – ensures even abrasive wear and extended sanding belt lifespan Curved element sanding – additional side table enables precise machining of complex shapes Quick belt change – lever mechanism allows fast abrasive replacement without tools Adjustable sanding unit – enables both horizontal and vertical operation depending on the workpiece type High belt speed – 980 m/min ensures fast and efficient material removal Compact dimensions with broad capabilities – combines a small footprint with wide application potential Standard Equipment Height-adjustable work table Side table for curved element sanding Movable sanding unit for vertical and horizontal operation Belt oscillation system Quick belt tensioning and replacement mechanism Dust extraction port Ø100 mm Operation manual (Polish language) CE Declaration of Conformity Optional Equipment Professional dust extraction system with dust filter Set of sanding belts with various grit sizes Mobile base with locking mechanism Table with quick angle adjustment system Invest in durability, efficiency, and precision. Choose the CORMAK MM2315 230V wood sander and enhance your workshop’s machining capabilities today. Technical Data Belt size: 2515 × 152 mm Work table size: 840 × 300 mm End and edge sanding angle range: 0–45° Ledpfevugq Hex Akuerl Additional table size: 300 × 250 mm Table height adjustment: 80 mm Side fence size: 700 × 60 mm Maximum sanding length: 790 mm Dust extraction port diameter: 100 mm Belt speed: 980 m/min Motor power: 2.2 kW Power supply: 230 V Weight: 138 kg Warranty: 12 months Manual (DTR): Yes CE Declaration: Yes

Condition: excellent (used), Year of construction: 2013, operating hours: 1,200 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 4,800 mm, overall weight: 980 kg, cutting height (max.): 800 mm, cutting width (max.): 800 mm, total width: 2,000 mm, total height: 2,500 mm, saw drive: 11,000 W, total length: 6,700 mm, input voltage: 400 V, saw band width: 32 mm, Equipment: scorer, Indoor machine, rarely used. 1,200 operating hours. Year of manufacture: 2013. Band saw, stationary, cutting length 4.8 m, with electric motor, 15 HP/11 kW. Cutting thickness adjustment SW-10, electric feed, electric height adjustment, and hydraulic package 5 (log loader, log turner, side supports, compensating rollers, central clamp, 2 down-hold clamps). Including pre-cutter. Several saw bands. Dimensions: length 6.7 m, width 2.0 m, height 2.5 m. Lredpfx Akey Sv I Ieusl

Condition: good (used), For sale is a professional, stationary, industrial-class Wood-Mizer LT300S band sawmill. This is a flagship, fully automated machine designed for mass, continuous production of lumber with minimal physical labor (the entire operation is handled by a single operator from a stationary station/cabin). The machine comes from the official Polish distribution network (manufactured in the Wood-Mizer Industries factory in Koło). The original nameplate is fully legible, guaranteeing the complete legality of the equipment and trouble-free selection of spare parts and manufacturer's service support. ⚙️ TECHNICAL DATA FROM THE NAMEPLATE: Manufacturer: Wood-Mizer Industries sp. z o.o., Koło, Poland Model / Type: LT300S Serial number: 032006 030 A4.03 Supply voltage: 400 V (Three-phase) Frequency: 50 Hz Full load current (FLA): 54 A Full load current of largest load (FLA of Largest Load): 39 A Short-circuit current (AIC): 35 kA Electrical diagram number: shlt300 💎 KEY FEATURES AND ADVANTAGES OF THE LT300S MODEL: Extreme Performance: "Heavy Duty" construction designed for multi-shift operation. It allows processing from 15 to even 24 m³ of logs per shift (depending on the type and dimensions of the wood). Thin-Kerf Technology: Thin, stable blades (standard width 38-44 mm) significantly reduce the amount of waste in the form of sawdust, resulting in a much higher yield of finished material from each log. Full Industrial Hydraulics (High-Output): Machines in this series are equipped with a very fast and powerful hydraulic system: two-way chain log turner, advanced log clamping, and leveling rollers. Ledpfjy Tzqdjx Akujrl PLC Automation (Setworks): The computer automatically calculates and positions the head to the appropriate cutting dimension with the highest repeatability, eliminating human error and reducing the time between successive saw passes. Board Return System: Integrated sweeping arms automatically remove the cut material during the head's return, so no additional worker is needed to operate the output line. 🪵 PROCESSING PARAMETERS: Maximum log diameter: approx. 91 - 95 cm Maximum cutting width (between rollers): approx. 73 cm Diameter of guide wheels: 600 mm (cast iron) Main engine power: 22 kW (provides a large power reserve for the hardest wood species or frozen logs) 🛠️ TECHNICAL CONDITION: The sawmill is in perfect working order, regularly serviced, and maintained to a high technical standard. Ready for immediate integration into the sawmill's production cycle without the need for any financial investment.

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. Lodpfx Akjwf Anhsuerl 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Ledpfx Akjy Su Efeuorl

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Lrsdpfx Aksy Su D Ujujl

Condition: used, Colour: Grey Polishing sander Löwer FA 4 S Year of construction 1998 Lrsdpfxownh Avo Akuol Machine no. 9667 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP200 Planer-Moulder Simultaneously planes and profiles from both sides Machine used for training and demonstrations, inspected and factory-set. Working parameters: Lrsdoyr Dclspfx Akuel double-sided planing width 10-300 mm planing height 15-100 mm min material length 470 mm single-sided planing width 10-400 mm planing height 15-210 mm Feed speed 2-11 m/min Technical specifications: upper shaft – straight knives 410 mm, 2 pcs, 6000 rpm side shaft – spindle 30 mm, straight knives 50 mm, 2 pcs, 6000 rpm Motors: upper shaft – 2.7 kW side shaft – 2.7 kW feed – 0.37 kW 3-phase, 400 V, 50 Hz, 16A Extraction ports – 1x100 mm, 1x125 mm Weight 370 kg

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. • FANUC controller • Working area: X - 3080 mm Y - 1540 mm Lrsdpfx Asyr Dawjkuol Z - 200 mm • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg Lredeyr Dfajpfx Akusl

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Lredjy N Rb Djpfx Akujl Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: Ledsy Na Hvjpfx Akusrl – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 950 kg, Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air-blast, frame support, chassis. Lrsdpfxjxq Ehxo Akujl

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm Lredpfx Aexfl Eaokusl max. sanding height 200 mm year of manufacture 1994 with CE mark

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Lrsdpfx Aovnv Uhjkuol Price of the above-mentioned special accessories on request! -----...

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven Complete with one mobile oven rack Lsdpfx Akjyw T D Djujrl In good working condition

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume); Lrsdpfx Ajvzub Hekuol

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, three-way table, 6 cross conveyors, log infeed, and much more. The sawmill line is fully operational. Customer service has been newly performed. The line is still in operation and can be inspected at any time. The price also includes approximately 100 saw bands for LT70/HR700 and 11 saw blades for EG800. Currently, the HR700 is not in use and is in storage. The HR700 is fully operational with only 30 operating hours. An alternative setup of the line with HR700 can be seen in the last picture. If you have any questions, I am happy to assist. Ljdpfjyz Ia Iox Akujrl