Used L19130B Jks for sale (11)

Condition: new, - External dimensions (LxWxH): 644x930x863 mm - Application range: -18 ÷ -22°C - Evaporation temperature: -30°C Ibedcvyexvr Upoqi Asd - Condensation temperature: +40°C - Cold room temperature: -20°C - Ambient temperature: 32°C - Defrost: Hot gas - Power supply: 230 V / 1+N ph / 50 Hz - Maximum absorbed current: 13.2 A - Maximum absorbed power: 2.8 kW - Nominal absorbed power: 110 W - Refrigerant: R452A - Output: 1,318 W - Nominal output: 1.9 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø300 mm - Airflow: 1,000 m³/h - Air throw: 6 m - Weight: 89 kg - Volume: 0.80 m³ - Hermetic compressor - Air-cooled condenser - Galvanized sheet body - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (BT models only) - Ambient temperature sensor - End-of-defrost sensor - Condensation control sensor - Power cable for door heater - Micro-switch connection cable - Digital display with temperature indication - Operating status display: - Cooling/defrost - Evaporator fans - Active alarm - Programming keys - Manual defrost button - Audible alarm - Low and high temperature alarm Ijdpfoxvr Upjx Anmjba - High condenser temperature alarm (dirty condenser) - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - End-of-defrost time overrun alarm - Faulty temperature sensor alarm - Condensation control sensor failure alarm - Evaporating temperature at -10°C for positive temperature (TN) - Condensation temperature at +40°C for TN - Evaporating temperature at -30°C for low temperature (BT) - Condensation temperature at +40°C for BT The listing was translated automatically. Translation errors are possible.

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe Ibjdpfxexvr T Es Anmoa - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 230 mm, feed rate X-axis: 36 m/min, total width: 1,860 mm, total length: 3,500 mm, total height: 1,830 mm, number of planer blades: 4, power: 47.25 kW (64.24 HP), Offered for sale is a high-performance four-sided planer moulder manufactured by JKS & Trade Moravia s.r.o., model QMB623W – MBQ623W, purchased new in 2021. The machine has seen minimal use only for 2 years, as it was originally acquired for a production project that was not implemented. Technical Specifications: Working width: 18–230 mm Working thickness: 10–160 mm Feed speed: 7–36 m/min (adjustable) Tool diameter: 125 mm (max) Power supply: 400V / 50Hz / 3-phase Installed power: 47.25 kW Main fuse: 100 A Machine dimensions: 3500 × 1860 × 1830 mm Weight: 6,000 kg CE compliant The machine is fully operational, regularly maintained, and comes with original documentation, including the operator manual. Suitable for precise and efficient four-side profiling of solid wood components. Ibjdpsxup Ecofx Anmja 📍 Location: Czech Republic The machine is available for immediate inspection and dispatch. 📩 Please contact us for pricing, detailed photos, or to arrange a viewing.

Condition: used, Year of construction: 2013, incl. 5 different sieves / Ibsdpjucqb Hofx Anmoa

Condition: like new (used), Manufacturer: V. Randwijks Rotor Dia.: 500mm Ibjdpsg Snt Ssfx Anmja Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM

Condition: used, fuel type: electric, fuel: electricity, Spijkstaal vehicle    • Fully electric    • Including license plate    • Including battery charger    • Maximum speed 18 km/h    • Directly from operation Condition: Used Iedpox S Np Ejfx Anmsba

Condition: good (used), Year of construction: 2000, Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor Iedpjw Hzx Usfx Anmoba -Rotary valve. Type JK-S w/ 6 blades, with drive -Speed: 19 rpm -Drive motor: KEB 0.55 kW -Inlet/outlet: 220 x 1500 mm -Dimensions: 340/1970/H305 mm -Weight: 113 kg

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts Ijdpsywd I Tofx Anmoba - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall cabinet.Designed for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: good (used), Year of construction: 2002, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, input voltage: 400 V, controller manufacturer: Siemens, input current: 16 A, control type: PLC-controlled, degree of automation: automatic, actuation type: mechanical, Here is the translation of the previous sales text into English: English Sales Listing For Sale: Sheet Metal Decoiling, Leveling, and Cut-to-Length Line For sale: A reliable, complete system for handling, leveling, and cutting sheet metal to length. 1. Decoiler / Uncoiler: JK-Kone JKH5 - Manufacturer/Model: JK-Kone JKH5 (Made in Hinnerjoki, Finland) - Max. Sheet Width: 1,250 mm - Power Supply: 400/230 V, 50 Hz, 16 A - Weight: 1,400 kg - Features: Rail-mounted base with wheels, hydraulic/mechanical coil expansion, and control panel. 2. Leveling and Cut-to-Length Unit: Restads Maskiner 8010 PS Ibedpfjznm Ibox Anmoa - Manufacturer/Model: Restads Maskiner Påarp, Sweden, Type 8010 PS - Year of Manufacture: 1991 (02/91) - Capacity / Max. Sheet Thickness: 1.25 mm - Serial Number: 5870 - Features: Digital/preset batch counter, roll leveling, guillotine shear (auto/manual modes), and pneumatic/hydraulic pressure gauges. Technical Specifications & Condition: - Power Connection: 400 V (16 A plug) - Condition: Used, fully functional industrial machine. Shows normal surface wear from use, but is mechanically sound.

Condition: excellent (used), Model: JK-2 Power supply: 230 V Number of phases: 1 Frequency: 50 / 60 Hz Power: 0.56 kVA Iedpfjyubk Eex Anmjba

Condition: good (used), 1 x Deburring machine Vollma JK WS 25 Particularly suitable for removing burrs from turned parts. Ijdeiz Dc Repfx Anmeba The machine can be inspected under power at our warehouse in Reichenbach.