Used Landreko Sbm-60-13 for sale (29,297)

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 60l / 300 kg Degree of cleanliness: SA-3.0 (deep and extensive corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 19 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 65 kg The SBM series compressed air blasting machines are mobile devices designed for advanced surface treatment using a stream of compressed air and abrasive media. Thanks to the advantageous conical bottom design to facilitate abrasive movement and the possibility of using various valve types, the machine is suitable for processing all types of abrasives with spherical, rounded, and/or angular shapes and any grain size. The SBM series blasting systems can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, ensuring quick and secure connections while allowing high compressed air throughput. The abrasive loading is performed by a pneumatically operated rubber membrane—without the need for inefficient screw connections—which makes the SBM series blasting systems safer and easier to use. The blasting unit is also equipped with a large inspection valve that enables quick tank discharge and allows for internal inspection. The SBM series blasting units allow for simultaneous operation with one or two working nozzles (depending on the model). Kdsdpfx Ajwrza Nsfvjl The control of the blasting unit (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an optional extra). The SBM blasting unit container was designed and manufactured according to the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 30l / 150 kg Cleaning degree: SA-3.0 (deep and extensive corrosion) Air demand: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Working temperature: -20 - 100 °C Cleaning performance: up to 16 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 45 kg The SBM series compressed air blasting systems are mobile machines designed for advanced surface treatment using a compressed air jet and abrasive grains. The beneficial conical bottom design facilitates abrasive movement and the possibility to use different valve designs makes the abrasives suitable for processing all types of abrasives with spherical, round and/or sharp-edged shapes and any grain size. Kedpfx Aewry R Tjfvodl The blasting systems of the SBM series can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, which ensure quick and safe connection while maintaining high compressed air throughput. The abrasive loading is carried out by a pneumatically operated rubber membrane - without the need for inefficient screw connections - making the SBM series blasting systems safer and easier to operate. The blasting unit is also equipped with a large inspection valve, enabling quick emptying of the tank and the possibility of internal inspection. The blasting machines of the SBM series allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning directly can interrupt the operation of the machine, as required by the latest health and safety regulations (solution available as an additional option). The SBM blasting unit container was designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE-marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 90l / 450 kg Degree of cleaning: SA-3.0 (deep and widespread corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 22 m2/h Kdodpfowrzbgex Afvel Supported nozzle diameters: from 2 to 15 mm Weight: 110 kg The compressed air blasting machines of the SBM series are mobile machines designed for advanced surface treatment with compressed air jets and abrasive media grains. The advantageous conical bottom design facilitates abrasive movement and, combined with the option to use various valve types, makes the abrasives suitable for processing all types of abrasives with spherical, round, and/or angular shapes and any grain size. The blasting units of the SBM series can achieve a surface quality up to class SA-3/SP5 and a capacity of up to 106 m2/h. SBM series sandblasters are equipped with large claw couplings, ensuring quick and safe connections while maintaining high compressed air throughput. The abrasive is loaded via a pneumatically operated rubber membrane - eliminating the need for inefficient screw connections - which makes the SBM series blasting units safer and easier to operate. The blasting device is also equipped with a large inspection valve that allows for quick tank emptying and the possibility of internal inspection. The SBM series blasting machines allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric versions) is intuitive and precise, making it efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an additional option). The tank of the SBM blasting unit has been designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU, based on and under the supervision of a design approved by a notified body, and is CE-marked.

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) - Supply air fan with frequency converter, controlled via regulator Ksdpjtbq Eqofx Afvodl - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: SN49983, functionality: fully functional, Chamber Furnace, Completely Overhauled, Very Good Condition, Available for Immediate Delivery, 12-Month Warranty - Max. Temperature: 1300 °C - Internal Dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 Liters - Separate Main Switch - 5-Sided Heating - Intake and Exhaust Air with Dampers, Electrically Operated via Belimo Actuators - Intake Air Fan with Frequency Converter, Controlled via Controller - JUMO Control System, Switchable to Other Languages - Additional Drag Element Type S for External Recording - Net Weight: 250 kg - Power Consumption: 18 kW - Current Draw: 26 Amps - Connection Voltage: 3/N/PE 400VAC - Connection Type: Prepared for Hardwired Installation, 32 A Plug - Documentation, CE Declaration - Electrically Tested and Supplied with Current DGUV Test Report Kdsdpfx Aox U Ekdofvsl Inspection by Appointment. Keywords: Furnace, Furnaces, Annealing Furnace, Industrial Furnace, Chamber Furnace, Kiln, Curing Oven, Tempering Furnace, Laboratory Furnace, Hardening Furnace

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 650 mm, total length: 984 mm, total width: 415 mm, Tested forklift battery for your truck – 48V 3PZS 375Ah – Special tank + 1 year warranty + Including Aquamatik (automatic watering system) + Including end connectors & REMA 320 plug (other plugs can be installed if required) + Capacity: min. 90–100% (C5 capacity report supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 415 mm Height: 650 mm Weight: approx. 580 kg Kedpfxsy Rnmas Afvjdl Suitable for the following models and others: Toyota 2FBE10 Toyota 2FBE13 Toyota 5FBE10 Toyota 5FBE13 Toyota 7FBE10 Toyota 7FBE13 Toyota 7FBR13 Toyota 7FBRE16N Toyota/BT RR-M 14 Toyota/BT RRE 140 M Toyota/BT RRE 160 M Atlet ET 150 Komatsu FB13M-2 Mitsubishi FB13TCA Mitsubishi FB15TCA Nichiyu FB13 Nichiyu FBT13 Nichiyu FBT13-18 Nichiyu FBT15 Nissan N01L13 Gjbnswqdtis Nkmgxsbp Nissan N01L13U Nissan S1N1L13Q Nissan TX13 Nissan TX15 Nuova Detas SE 315 Rocla TMF131 UniCarriers AS1N1TX13 Common battery sizes available – please inquire. Transport possible.

Condition: new, Technical specification: - Chamber volume: 1600 liters - Power supply: 230V ~ / 50Hz - Nominal operating pressure: up to 10 bar - Cleaning capacity: up to 23 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air consumption: 500 l / min (for 4.0 mm nozzle) Ksdjft Sqxopfx Afvsdl - Maximum air flow: up to 2,300 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: 2 x vacuum BRAGO - Gun: vacuum CTR x 2 - Working area dimensions: 1 500 x 1340 x 720 mm - dimensions of sight glass: 305 x 610 mm - Working table load: up to 600 kg - Lighting: LED, adjustable in the range of +/- 90 degrees (two parts) - Coating protection: powder coating - Working temperature: 10 to + 50 degrees Celsius - Common work table: Yes - Inspection valve: Yes - Weight: 720 kg The offer includes: - Land Reko SCI-1600-10 chamber cleaner -Transport cart - turntable - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal x 2 - Pneumatic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months warranty for contractors

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Mobile Concrete Batching Plant – SBM EUROMIX 1600 Manufacturer: SBM Mineral Processing GmbH Type: EUROMIX 1600 Type CM 128 L Year of Manufacture: 2021 Control System: GEDIS IBS33W Mixer Capacity: 1,670 liters Production Capacity: approx. 60 m³/h Total Production: approx. 25,000 m³ Aggregate Bins: 4 compartments Heating System: 1 × hot air system for aggregates 1 × hot water system for fresh concrete production Admixture System: Container with 6 × 1,500 liter tanks 6 admixture pumps Cement Silos: 4 × 85 tons Condition: Kedpsywi I Sofx Afvedl The plant is in very good condition and fully operational. Availability: Immediately available Location: Central Germany Price: On request Note: All prices are net ex works / ex location. Subject to prior sale, errors and/or misrepresentations. Sold without warranty or guarantee, as seen and inspected. Any reproduction, reuse, publication or copying of this offer in whole or in part is strictly prohibited.

Condition: new, Technical specification: - chamber volume: 1300 litres - Power supply: 230V ~ / 50Hz - Nominal working pressure: up to 10 bar - Cleaning capacity: up to 20 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 2,300 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR x 2 - Dimensions of the working area: 1 200 x 1240 x 700 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 300 kg - Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: Powder coating - Working temperature: 10 to + 50 degrees Celsius - Shared work table: Yes - Inspection valve: Yes - Weight: 350 kg Kodjft Sqqspfx Afvsdl The offer includes: - Land Reko SCI-1300-10 Chamber cleaner - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal x 3 - Pneumatic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls Kjdpfxeihf Tpj Afvjdl 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, empty load weight: 8,450 kg, axle configuration: 3 axles, first registration: 09/2017, next inspection (TÜV): 08/2026, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2017, mileage: 688,621 km, ref: 53416 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Side impact protection, * Lifting odometer, * Toolbox: 1, Kedpoy Tbm Sofx Afvjdl * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005191373 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: used, empty load weight: 8,450 kg, axle configuration: 3 axles, first registration: 09/2017, next inspection (TÜV): 09/2026, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2017, mileage: 653,112 km, Ref: W0013818 Equipment: * Double-deck beams: 22, * Air connection: Red/Yellow head, * Electrical connection: 1 x 15-pin + 2 x 7-pin, Ksdpfxey Tbk Rs Afvedl * ABS, * EBS, * Cooling unit, * Side impact protection, * Lifting odometer, * Tool box: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-deck system VIN: WSM000005186425 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m Delivery time (in days): 1

Condition: new, Year of construction: 2025, fuel type: diesel, power: 48 kW (65.26 HP), motor manufacturer: Iveco FPT F34TE1PV, General information Field of application: Construction Functional Generator capacity: 60 kVA Dimensions of cargo space: 285 x 100 x 142 cm CE mark: yes Other information Generator: Stamford SL12-Y Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 140 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery Kodpfx Afjwnwcrsvedl - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Kjdpfx Asy Snapofvodl Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Ausstattung: .Kernzug -Roboter

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Ksdpjw I T Ivefx Afvsdl Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: used, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,300 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2019, Equipment: ABS, = Further options and accessories = - EBS (Electronic Braking System) - Alloy wheels = Remarks = Number of axles: 3, tare weight: 8,418 kg, gross weight: 39,000 kg, type of chassis: incomplete chassis, kingpin size: 2 inch, alloy wheels, suspension type: air suspension, ABS, EBS, body year: 2019, side wall material: insulated, refrigeration unit manufacturer: Thermo King, refrigeration unit model: SLXi300, refrigeration unit: diesel/electric, unit hours / electric: 7,709 h, unit hours / diesel: 10,843 h, wall thickness: 60 mm, type of cooling: cooling, day/night cooling: yes, axle type: SCHMITZ, FP 60 COOL = Further information = General Information Cab: Day cab Registration plate: KLEYN1 Kdsdpfxjy N Rqxs Afvjl Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 16 mm; tire tread right: 5 mm Axle 2: Tire tread left: 11 mm; tire tread right: 11 mm Axle 3: Tire tread left: 9 mm; tire tread right: 9 mm Weights Unladen weight: 8,418 kg Payload: 30,582 kg Gross vehicle weight: 39,000 kg Functional Loading height: 126 cm Refrigeration unit: diesel and electric (10,843 h diesel; 7,709 h electric) Wall thickness: 60 mm Environment Emissions class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good price • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Competent technical services • The safety of “recognizable quality” • And more… Please visit our website for special offers and the complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request through our website. Ask directly about our European warranty package.

Condition: new, Neugart PSFN140-020-SSSD3AG-Z32/60/130/165/B5/M10 planetary gearbox SN: 2186 incl. motor flange, unused in opened original packaging, 100% fully functional, delivery as per photos. Kedpfx Ajy Npg Ssfvjdl

Condition: ready for operation (used), Baumüller BUS20-60/135-30-001 built-in power converter SN:91314741, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Kodpfxoi D T Hus Afvjdl

Condition: new, Neugart PSFN140-020-SSSD3AG-Z32/60/130/165/B5/M10 . 100455119 F-No. 2315656 Planetary gearbox Serial number: 7777, unused, in sealed original packaging, 100% operational, scope of delivery as per photos. Kdjdpfx Afoy Nrzlsvol

Condition: used, maximum load weight: 30,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2020, next inspection (TÜV): 09/2026, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, Equipment: Air suspension Safety: ABS * EBS Kedjy Hy Rvopfx Afvedl * Disc brakes * Refrigeration unit Thermo King SLXi 300 * Operating hours: 6400 * Pallet box for 36 pallets * Lift axle * Double-deck with beams * Temperature printer

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Kjdpfx Afey Avh Nsvedl Upon request, we are happy to send you a layout plan.

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 9,894 h, load capacity: 13,600 kg, lifting height: 5,300 mm, free lift: 2,650 mm, fuel type: diesel, mast type: duplex, construction height: 4,150 mm, fork carriage width: 2,450 mm, fork length: 1,500 mm, empty load weight: 19,500 kg, total length: 4,660 mm, drive type: Diesel, construction width: 2,550 mm, Diesel Forklift Load Center: 600 mm Fork Width: 200 mm Fork Thickness: 70 mm Mast Type: Duplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tires Type: Superelastic Front Tires Size: 12.00-20 Rear Tires Type: Superelastic Rear Tires Size: 12.00-20 Kedexxdyvepfx Afvedl Description: In addition to this Svetruck model, we have around 200 heavy-duty forklifts, compact forklifts, standard forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing at favorable rates are always available. We are also happy to purchase your used equipment outright, even if you don't buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice about this 13.6 60-30 model. P.S.: Our forklift master workshop specializes in repair, maintenance, refurbishment, and custom construction for forklifts from 8 tons upwards. We can also display your vehicle for consignment sale at our premises if you wish. Side shifter, fork positioner, Heater, full cab, full free lift,

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Winding diameter max 600 mm Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm - 10 upper and lower knives - 1 edge guiding system - 1 cutting table Kodexyihnspfx Afvodl - 1 extraction system for edge trims - silicone-coated guide rollers, suitable for adhesive tapes - with documentation

Year of construction: 2013, condition: excellent (used), Comes for sale: 1 piece used H crane traverse Kdjdpfx Afjit T N Ajvol Manufacturer: SMV Scheunemann type: 13-0163 SHTS60 BJ: 2013 Own weight: 4.105Kg Combined 60t and 28t load lifting points dimensions L x W x H: 5.900 x 2.700 x 1.200mm Can be inspected in our warehouse in 09599 Freiberg.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 16,191 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,390 mm, fuel type: diesel, mast type: duplex, construction height: 4,100 mm, fork carriage width: 2,450 mm, fork length: 1,200 mm, empty load weight: 18,300 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 more heavy-duty forklifts, compact forklifts, forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing & financing at attractive conditions are always possible. We are also happy to purchase your used equipment directly, even without a trade-in. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 13.6 60-32 unit. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts starting at 8 tons. We are also happy to exhibit your vehicle for consignment sale at our site. Kjdpfxoxxdy Ae Afvedl Side shifter, fork positioner, Heater, full cab, full free lift,