Used Lapmaster 24 Lapping Machine Lapper Lappatrice Per Piani for sale (83,695)

Condition: used, Lapmaster 24 dia 600mm 3 rings This machine can be inspected under power in our warehouse Mimu Machine Tools (Italy) Rcodpszi Encsfx Alajf Diameter: 600

Condition: ready for operation (used), rotary table diameter: 660 mm, Lapmaster 24 Lapping Machine 3 Lapping plates 610mm Dia Rcjdezlg Euopfx Alajf 3 Conditioning rings 3 Roller yokes With: Free standing abrasive system As new condition Dimensions: 110 x 1470 x 1190mm high Weight: 610 KGS

Condition: used, Year of construction: 2022, The LINEA BOX WRAPPER 24 by Peroni Ruggero is a modern, automatic line for wrapping rigid boxes. It is a solution designed for manufacturers of premium packaging who require precision, repeatability, and fast order fulfillment with minimal changeover time. The machine enables the production of a wide range of boxes with different dimensions, while maintaining excellent wrapping quality even with demanding designs. An automatic paper feeder and an advanced glue application system with viscosity control guarantee a stable and reliable process. The operator places the box onto the paper sheet, and a mechanical centering system, supported by sensors and drives, precisely positions the elements before further processing. The materials are then automatically transported to the wrapping module, where the entire process runs fully automatically. The finished products are collected by a Pick & Place system and transferred to the output section. An additional advantage is the quick tool change system, which minimizes production downtime. Tools adapted to specific box sizes can be made of wood and installed in just a few minutes. The machine has been used sparingly, so it is in very good technical and visual condition, ready for immediate implementation in production. Key benefits: Automatic production of high-quality rigid boxes Handles boxes up to 240 mm in height High precision in positioning and wrapping Automatic glue viscosity control Short changeover time – approximately 3 minutes Output of up to 350 finished boxes per hour Reliable Pick & Place collection system Very good technical condition – manufactured in 2022 Technical data: Manufacturer: PERONI RUGGERO Model: LINEA BOX WRAPPER 24 Year of manufacture: 2022 Rjdszbthvjpfx Alajcf Serial number: 011 Paper format and weight Maximum sheet format: 700 × 1000 mm Paper weight: 110–150 g/m² Box dimensions Minimum internal dimension: 50 × 50 mm Maximum external dimension: 500 × 500 mm Box height: 20–240 mm Performance Automatic format change: approx. 3 minutes Mechanical speed: up to 500 cycles/h Production output: up to 350 boxes/h

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Rcodpfx Aozw Tzaelaef Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 043804 / 55060428, No minimum price – guaranteed sale to the highest bidder! Two machines are offered for sale as a package: 1. Lapping machine Bierther ELAP700-91S 2. Oil mist separator Donaldson B.V.B.A. DMC-MMC Both machines have recently been inspected and certified by DGUV. Data for the BIERTHER ELAP700-91S: TECHNICAL DETAILS Diameter of lapping disc: 700 mm Inner diameter of truing rings: 275 mm Rsdpfoztqxzjx Alajcf Number of truing rings: 3 Rated speed: 56 rpm MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Mains connection: 3P + N Fusing: 16 A Current consumption: 8 A Motor power: 2.2 kW Power of lapping compound pump: 55 W Sound pressure level: < 70 dB(A) Tank capacity: 10 l Compressed air connection: 4 bar Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,900 mm Height without pneumatics: 1,400 mm Weight without pneumatics: 750 kg Total weight: 900 kg EQUIPMENT Crossbeam for forklift attachment DGUV-certified Data for the DONALDSON B.V.B.A. DMC-MMC: TECHNICAL DETAILS Air volume flow rate: 2,000 m³/h MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,600 x 670 x 2,000 mm Weight: 200 kg EQUIPMENT DGUV-certified

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Rodpfxozt H Tno Alajcf Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Type: Euroclass Grizzly * Surface: 2400 x 1300 mm - 2 decks Rodjywmkdopfx Alascf * Driving: 11 kW E-motor * Incl.: chassis.

Condition: ready for operation (used), * Brand: Binder * Type: KS 2400/6 Rsdpfjywmn Asx Alaocf * Surface: 6000 x 2400 mm – 2 decks * Screen opening upperdeck: [] 8 mm. * Screen opening lowerdeck: [] 4 mm. * Driving: 18,5 kW E-motor.

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Type: Euroclass * Surface: 6500 x 2400 mm – 1 decks * Driving: 18,5 kW E-motor * incl.: springs Rcsdpfx Alsywmn Nsaef

Condition: used, Year of construction: 2022, functionality: fully functional, D-Warper/22 Direct Warping Machine- Seri Çözgü Makinası 15 kw Working Width : 2200 mm Capacity of Creel 960 Rcsdpfxey R U Epe Alasf Supply Voltage : 3x400

Condition: ready for operation (used), * Brand: Schauenburg * Surface: 6000 x 2400 mm - 2 decks * Screen opening upper deck: [] 5 mm * Screen opening lower deck: [] 5 mm * Driving: E-motor 30 kW Rjdpjywmglefx Alajcf * Incl.: Springs.

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Under a service contract until the very end. Technical Specifications: Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Rjdpfx Alezv Nkhoaecf Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate – Tapping block – Spare knife

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE U.A: (list not exhaustive): Redpfx Aotxitvjlascf Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Lapping machine, Hahn & Kolb - LHD 0 Redpfxszbz Ttj Alaecf - Machine from a state institution / original condition - Lapping disk diameter 400 mm - Max. workpiece height 120 mm - Max. distance between the cast lapping disks 80 mm - Speed range 40-80-160 rpm - Speed - drive motor 700/1400/2800 rpm - Total power 1.8 - 2.7 kW - Turning device - manually operated - Various lapping mandrels - Documentation Dimensions: L x W x H 1.4 x 1.3 x 1.9 meters / Weight 1700 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Crown gear adjustment: Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Rcedpfx Aljw T Tpdsasf Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.

Condition: used, Year of construction: 2015, functionality: fully functional, Hard Metal Carbide Grinding Lapping Machine Magnetic base Fully PLC controlled Grinding Length Capacity 600 mm Grinding Motor 2.20 kW / 3 hp External Diameter of Grinding Wheel 150 mm / 6” Rcodpfx Ajziw Eaolaof Grinding Wheel Speed 3450 rpm Feed/Pump Gear Motor 0.25 kW / .3 hp Grinding Wheel Feed per Stroke Manual 0.05 mm Coolant Pump Capacity 20 L/min Magnetic Chuck Width 90 mm / 3.5” Carriage Feed Speed 1.0 mpm Electrics 400/3/50

Condition: good (used), 1 x Hagesana Cream Whipper Machine. Located Melksham. Lift Out £10. UKFM1-6803. Rcodpoxggx Defx Alajf

Condition: used, Wigo Double squaring machine with 3 groups per side, complete with inverters. - right and left circular saw - right and left cutter - right and left cutter Max working width: mm. 1500 Engine power: Circular saws: 3KW X2 Toupie Milling Machines: 5.5kw x2 Rotary Sanders: 5.5kW x2 Feed motor: 4KW Rcedpfx Asummldolajf Shoulder width adjustment motor: 3KW

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Speed (max.): 60 rpm Dimensions (W x D x H): 1,775 x 1,720 x 950 mm Power: 7.5 kW Power consumption: 9,400 W Connection voltage: 3 x 400 V, 50/60 Hz Weight (kg): approx. 2,800 kg Suitable lapping ring, inner diameter: Ø 480 mm Cooling: no Fuse rating: 25 A, slow-blow Volume of lapping compound waste tank: 12 l Suitable lapping disc size: Ø 1,200 mm / 47" Rcodpszmf Rlsfx Alasf Number of roll yokes: 3

Condition: ready for operation (used), Year of construction: 2011, Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center - CE marking - Year of manufacture: 2011 - Control: Fanuc Oi-MD - Travel X / Y / Z: 720x480x530mm Rjdpfoztymhex Alaecf - Distance spindle nose / table: 100-630mm - Table size: 800x480mm - Max. table load: 500kg - Spindle taper: BT-40 - Spindle speed: 8000 rpm - Spindle motor: 7.5 / 5.5 kW - Rapid traverse X / Y / Z: 48 m/min each - Feed rate: 1-10000 mm/min - Tool changer: 24 positions - Tool change time (T-T): 3 sec - Max. tool weight: 7kg - Max. tool diameter: 80mm - Work light - Coolant system - Chip conveyor - Electronic handwheel Dimensions (LxWxH): 2.8x2.2x2.8 meters / Weight: 4400kg Subject to errors and omissions.

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: Redpfxodkx Ans Alaocf - Drilling capacity in steel ST 60: 28 mm - Drilling diameter in steel ST 60: 32 mm - Drill spindle mount: MK 3 - Right/left rotation - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm - Weight, approx.: 420 kg - Includes: - Coolant system - Quick-change drill chuck 1-13 - Lighting

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, Bickel HK 3/68 Rsdpfx Aezxbvzolaecf Description This machine, with a working width of 68 cm, is designed for economical use in perforating or grooving operations. The punching process is activated via an electrically controlled clutch that is triggered by a foot pedal. This allows the operator to use both hands to position and align the sheets.

Condition: excellent (used), Year of construction: 2005, operating hours: 23,900 h, functionality: fully functional, machine/vehicle number: 503982, STAEHLI DLM-705 FLAT LAPPING MACHINE Country of origin: CH Dimensions: 3300x1970x2600 mm Net machine weight: 8000 kg TECHNICAL SPECIFICATIONS Outer diameter of lapping plates: 705 mm Number of satellites: 4-8 Distance between lapping plates: < 390 mm Rcjdpfxew Uc Hno Alaef Programmable working pressure for parts to be machined: 0-200 daN Stop precision: 0.1 µm Programmable rotational speed for the lapping plates Flat honing and micro-finishing: 0-250, 300, 400, 600 min⁻¹ Central drive: 0-125, 220 min⁻¹ Machining accuracy: 0.1 µm Subject to errors or omissions; technical data is provided without guarantee.

Condition: good (used), Lapping wheel diameter 500 mm Rodpog Smwhjfx Alajcf Inner diameter of dressing rings 230 mm Speed of lapping wheel 0-100 rpm Working pressure 0-400 kg MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2018, functionality: fully functional, disc diameter: 1,600 mm, Single-disc fine grinding or polishing machine For large components Workpiece holder Ø 1600 mm Tool Ø 500 mm to 525 mm, can be fitted with various fine grinding or polishing pads Control S7 with HDMI KSM tank 50 liters Rcjdjwrpclopfx Alajf Polishing agent circulation system 50 liters Main drive 11 KW