Used Lapp Mikron Dt 300 Va Wf 51C for sale (17,000)

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm Bwjdskzpm Hepfx Aldjn -Weight: 5.7 kg

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Bwodpfx Ajtuwk Ujldon

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm Bwodpfx Alokvrptodsn -Weight: approx. 525 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA -Primary: 3x380V -Secondary: 3x95/165 V Bwedpfx Aekyy Uqeldon -Dimensions: 335/135/H350 mm -Weight: 41 kg

Condition: used, Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg Bjdpokvrqisfx Aldewn

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW Bwedpfx Ajkxhpuslden -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg Bwodpfxswd N S Do Aldon

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A Bwedekzpngspfx Aldjn -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo of the nameplate -Dimensions: 180/160/H215 mm Bwsdskzpmuopfx Aldjn -Weight: 25.5 kg

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min Bwodpjtqqplefx Aldon rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: used, control: Heidenhain TNC 155 tool taper: SK 40 quill stroke: 110 mm table size: 1000 x 500 mm travel: x-710, y-500, z-460 mm spindle speed: 31,5-3150 rpm accessories: Bsdpfxsc Tt Hrj Aldjwn angle table, coolant equipment, div. retainers

Condition: ready for operation (used), X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible. Bwjdpezavyrofx Aldsn

Condition: ready for operation (used), Rotational speed: 0-3150/min, power supply: 20A, connected load: 9kW, control: Heidenhain TNC 155, length: 2700mm, width: 2900mm, height: 2000mm, weight: 2.3t. An on-site inspection is possible. Bjdpfx Aljzavyxedown

Condition: good (used), Year of construction: 1991, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, X-travel: 560 mm Bsdpsza Auvsfx Aldown Y-travel: 500 mm Z-travel: 400 mm Control: TNC 360 Spindle speed: 40-4,000 rpm Total power requirement: 7.5 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition Bedpfx Aow A Af Ijldswn

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Bsdpjlnfggjfx Aldown Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: as good as new (ex-display), Year of construction: 1999, functionality: fully functional, WE OFFER MIKRON CNC AN VERY EXCELLENT OPORTUNETEY TO BUY AN NEW CONDITION MACHINE Bodpfxevnz Exj Aldjwn MACHINE IS BRAND NEW CONDITION- NEWER USED FOR ANY WORK.

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW table load 350 kg dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis Bwjdpfx Asyxr Hmoldjn - external electric handweel - housing - universal head

Condition: good (used), Year of construction: 1992, Mikron WF 3 DPM Tool Milling Machine Mikron WF 3 DPM with Heidenhain TNC 135 Control, Year 1988, Overhauled in 2014, Excellent CONDITION Technical Data: - Year of manufacture: 1988 / 2014 - Fixed angle table - Spindle speed: 31.5 to 3150 rpm - Stepless feed in 3 axes: 0 to 2000 mm/min - Travel paths X/Y/Z: 500/500/400 mm - Rapid traverse x/y/z: 3 m/min - Table size: 800 x 450 mm - Table load capacity: 250 kg - Vertical quill stroke: 90 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1950 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories and Equipment: - Heidenhain TNC 135 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, control system manual, and programming examples - Handwheels - Coolant system Bwodpfx Asyxc Unoldon About the machine: A Mikron WF 3 DPM tool milling machine with Heidenhain TNC 135 control is being offered. This universal milling machine is in excellent original condition. It comes from a workshop where it was used only occasionally for prototyping. The control system is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very easy thanks to the swing-away vertical head. The guides are lubricated regularly via central lubrication. The Mikron has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Mikron under power at our facility. You can find more milling machines from well-known manufacturers on our website.

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm Bedpo H I Hdefx Aldswn tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 150, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Bedpfx Ajpcf D Ioldewn

Condition: good (used), Complete specifications are shown in the photos of the listing. CNC HEIDENHAIN 426 Bodpfx Ajymgd Isldewn Machine in good working condition, videos available upon request.

Condition: good (used), Milling Machine Mikron WF 32 CH Technical Data: X-axis: 560 mm Y-axis: 500 mm Z-axis: 400 mm Clamping table Clamping surface vertical: 300x450 mm Number of threaded holes: 2 x 6 Speed range: 25-6300 rpm Bwjdpfx Aoyq Hcrjlden Swivel range vertical milling head: +45°

Condition: good (used), Year of construction: 1996, Milling Machine Mikron WF 21C 1996 Technical Data: X-axis: 400 mm Bjdsyq E I Tepfx Aldown Y-axis: 400 mm Z-axis: 400 mm Clamping Table Clamping surface, vertical: 300x450 mm Number of threaded holes: 2 x 6

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Bsdpfx Ajwit Rheldewn Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!