Used Lathe For Gas And Oil Pipes for sale (23,722)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in Ppjdpfx Aloy Sf Azjrot • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank suitable for oxygen, nitrogen, argon, and carbon dioxide (CO2). Podpfxoyuu Sce Alrept Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Podpfx Aljy Shyisrjpt

Condition: good (used), Toolholders bought in company where used for Biglia machine Pedpfxoyuyhio Alrspt

Condition: excellent (used), 200m3 stainless steel tanks Number of items: 3 180m3 stainless steel tanks Pedpfsfngl Nsx Alrjpt The diameter is 4.70m Height without legs is 14m 4,1mm wall thickness 5,1 bottom thickness We offer transport with our specialized trailer to every region of Europe!

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Psdpog Atrvefx Alrjpt

Condition: excellent (used), Used gas panels for cylinder filling ramps – Oxygen, Argon, Nitrogen For sale are several professional gas panels/gas distributors for cylinder filling ramps, suitable for oxygen, argon, and nitrogen cylinders. Ppsdpfxsy N S Hhe Alret Details: Manufacturer: SIAD GAS SPECIALI Equipped with high-pressure gauges up to 300 bar and precision regulation For cylinder filling and gas distribution Collection by arrangement. If you have any questions or are interested, please contact us for more information.

Condition: excellent (used), Year of construction: 1990, Aurepa gas tank semi trailer for oxygen, nitrogen, argon cryogenic Technical Information: Ppedsittfnepfx Alrjt Working pressure: 3 bar Pump: yes Flowmeter: yes We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us via e-mail.

Condition: excellent (used), Year of construction: 1986, Cryolor gas tank semi trailer for oxygen, nitrogen, argon cryogenic, carbon dioxide, LIN, LOX, LAR,CO2 Manufacturer: Cryolor, France Pedpfxjwmmake Alrept Year of Manufacture: 1986 Type: EFM 17000 Total Capacity: 17,410 liters Tare Weight: 10,050 kg Gross Weight: 22,000 kg Working Pressure: 20 bar Test Pressure: 27.32 bar Tank Code: R 27.3BN Insulation: Vacuum insulated The tank is for the transport and storage of deep-cooled liquid gases such as nitrogen, oxygen, argon, or CO₂. Contact us for more information or to arrange a viewing.

Condition: excellent (used), Year of construction: 2004, Gofa semi-trailer cryogenic for nitrogen, argon, oxygen, LIN, LOX, LAR. Year: 2004 Working pressure: 3 bar Volume: 12000 L We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide. Ppederk Na Aopfx Alrot We will be glad to answer your questions via phone and e-mail

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Ppjdpfsq Nx Alox Alrot Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: excellent (used), Year of construction: 2006, For sale are functional and very well-maintained dual-fuel burners from the Weishaupt brand, model GL3-630 kW, complete with a gas line DUNGS DN 40. Weishaupt: GL3 - (630 kW) Burner type: GL3/1-E Design: Dual-fuel Output: 90 - 630 kW 16 - 53 kg/h Year of manufacture: 2006 Psdpfxjzaby Rs Alropt

Condition: excellent (used), Year of construction: 2005, For sale: a functioning and very well-maintained dual-fuel burner (oil/gas) of the Weishaupt RGL50 brand – 5400 kW, including gas valve. Year of manufacture: 2005. RGL50 Ppsdpfx Alszabnnoret Output: 600 - 5400 kW 95 - 453 kg/h Design: ZM Year of manufacture: 2005

Condition: excellent (used), Year of construction: 2010, For sale is a functional and very well-maintained dual-fuel oil/gas burner from the ELCO kLÖCKNER brand, including gas piping (Dungs DN 65). 1. Burner type: EK 6.200 GL Output: 279 - 1710 kW Ppjdpfsy Uuw Hox Alrot Heating oil: 50-163 kg/h Year of manufacture: 2010 Connection pressure: 300 mbar

Condition: used, - Oven type: Cervap - Serial no.: 17280 - Year: 04/04/1990 - Plate dimensions: 750x1860 mm - Baking surface: 5.5 m2 - Electromechanical control panel - 4 loading doors - With loader/proofer elevator Ppsdsw Eivfspfx Alrst - Voltage: 220V single-phase + earth - Power: 0.6 kW - Electromechanical interface - All Cervap ovens are equipped with this interface as standard - Visual indicators of oven operation - Temperature regulator Ley Tdxuew Eivfjgsrr - Baking timer - On/Off switch - Steam injection - Valve opening control - Front-mounted steam timer - Delayed start timer/clock

Condition: excellent (used), Year of construction: 2005, For sale are functional and very well-maintained dual-fuel burners (oil/gas) – Weishaupt brand, (1875 kW) with control cabinet and gas line (Dungs DN 65). 1. Weishaupt GL 30/2-A Design: TM-1LN Year of manufacture: 2005 Output: 300-1875 kW 31-157 kg/h 2. For sale are functional and very well-maintained dual-fuel burners (oil/gas) – Weishaupt RGL40/1-B brand (2550 kW), including gas valve, Dungs DN 65, year of manufacture 2001, with control cabinet. Weishaupt RGL40/1-B (2550 kW) - Output: 450-2550 kW Ppodpjwgk A Asfx Alrot - 45-215 kg/h - Design: ZM - Connection pressure: 15-500 mbar

Condition: excellent (used), Year of construction: 2004, For sale: functioning and very well-maintained dual-fuel burners (oil/gas) of the Weishaupt brand, manufactured in 2004, including gas piping. Weishaupt RGL50/1-B (4000 kW) - Output: 550-4000 kW - Output: 55-336 kg/h - Design: ZM-NR - Connection pressure: 15-500 mbar - Delivery is possible upon request. - All technical data can be seen in the pictures. - Larger and additional pictures are available upon request. Preferably sold to dealers, businesses, or for export. All information is subject to change without notice and is provided without warranty. The seller assumes no liability for typographical errors or data transmission errors. Pedpoia N Ipjfx Alropt

Condition: excellent (used), Year of construction: 2000, used Weishaupt burner ----- RGL70 2-A/ ZM Pedpfsxf Dzyex Alrept year of manufacture: 2000 output: 1,000 - 10,500 kW

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Pjdpfsya I Iusx Alropt Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: used, -Deck: 2.20 m -Width: 1.50 m -Number of doors: 6 Ppedpfxsy Icg Ns Alrot -Brand: Bongard -Energy: Gas / Fuel oil -Overhauled equipment: The equipment is prepared upon order; collection and return deadlines are agreed at that time (please request the price after overhaul)

Condition: used, Year of construction: 2009, machine/vehicle number: Bongard Cervap 600/9.222, - Brand: Bongard Ppjdpfxey Du I De Alrot - Model: Cervap 600 / 9 chambers - Type: fixed-deck oven - Technology: steam tube - Energy: gas or oil - Configuration: 3 decks - Number of lanes: 3 lanes - Lane width: 600 mm - Total number of chambers: 9 - Usable height per deck: 170 mm - Application: bakery - Application: pastry - Application: viennoiserie - Conduction baking - Radiant baking - Annular steam tubes - Refractory stainless steel hearth - Integrated steam generator per deck - Standard control: Ergocom - Optional control: Opticom - Baking surface 600/9.222: 12.10 m² - Floor area 600/9.222: 8.40 m² - The Bongard Cervap (model 600/9.222) is the reference oven for traditional French bakeries, renowned for its exceptional robustness with 3 baking decks, each divided into 3 lanes, making a total of 9 chambers.

Condition: used, Year of construction: 2010, functionality: fully functional, - Brand: Bongard - Model: Cervap 600 / 9 doors - Technology: steam tube - Energy: gas or fuel oil - Configuration: 3 decks - Number of lanes: 3 lanes - Lane width: 600 mm - Total number of doors: 9 - Usable height per deck: 170 mm - Application: bakery - Application: pastry - Application: viennoiserie - Baking by conduction - Baking by radiation - Annular steam tubes - Refractory stainless steel combustion chamber Ppodpfsy Duyasx Alrjt - Steam generator per deck - Standard control: Ergocom - This is a professional bakery oven from the French brand Bongard. It is a model from the Cervap range.

Condition: used, - Trolley dimensions: 600 x 800 mm - Electromechanical control panel Ppsdpfsyhqd Iex Alret - Bongard 8.62 gas oven - Capacity: 144 to 180 baguettes - Supplied with gas burner Optimize Your Production with a Professionally Refurbished Oven, Ready for Use! - Trolley Dimensions: 600 x 800 mm – Compatible with standard bakery trolleys for easy handling. - Electromechanical Control Panel: Simple and intuitive for precise baking control. Production Capacity: - 180 baguettes of 250g on 19 baking levels – Maximize your bread production with a capacity suited for high-volume bakeries. - Supplied with Gas Burner: Versatile gas-powered oven, providing even and efficient baking. Why Choose the Bongard 8.62 Oven for Your Bakery? This professional oven is designed to meet the demands of modern bakeries, whether artisan or industrial. With high capacity and proven reliability, it ensures consistent baking results for superior quality bread. Dsdcusyhqd Io Ti Enjkh Don’t miss this opportunity to upgrade your bakery with a pre-owned Bongard oven. Contact us now for more information and to receive a tailored offer to meet your needs.

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 trolleys: 800x600 mm - Baguette capacity: minimum 360 - Refractory stone (heat accumulator) - Integrated heat recovery unit - Baking surface: 19.2 m² - TOUCHMATIC touch screen control - Voltage: 400V - Power: 4 kW - Burner: Gas - ALL-IN-ONE = Rotary rack oven with integrated heat recovery unit - No additional trades required for installation - No electrical consumption by the heat recovery unit, as it is 100% mechanical Ppodpoxxanpjfx Alrjt - No need to connect to BMS (Building Management System)/central heating, no buffer tanks to store hot water - Automatic adjustment with no need for control, monitoring, or complex programming - Truly maintenance-free heat recovery unit - Heat recovery on each burner operating cycle - Long service life equal to that of the oven’s heat exchanger - Primary energy consumption reduced by 20% (oil/gas) - Improved baking results due to faster achievement of target baking temperature after loading - Further primary energy savings thanks to shorter baking times - No downtimes (no reheating periods) for continuous baking - Heat remains where it is produced and needed: in the baking chamber, to bake your delicious products

Condition: used, -Dimensions: 1700x2870x2500 mm -Trolley dimensions: 1000x800 mm -Number of trays: 14-16 -Useful baking area: 210-178.75 m² -Oven width + controls: 1400+300 -Burner position: Top -Number of decks: 7-8 -Combination of deck oven and rack oven -Reference: LH108HD 9R101028 -Serial number: 5000-110 Ljy Tdjwxmtzexugorr -Power: 3 kW -Voltage: 230-400 V / 50 Hz Ppodpowxmtzsfx Alrst -Year: 2011 -Sold with gas burner