Used Lauffer Hydraulic 4-Column Press for sale (73,848)

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Lsdpfx Ajwva I Heiieab Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm Laedpfxsdzp Tcs Aiiob table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: excellent (used), Year of construction: 1988, machine/vehicle number: 119, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 30 t, stroke length: 700 mm, table width: 500 mm, table length: 700 mm, clearance between the columns: 680 mm, total length: 2,100 mm, total width: 1,800 mm, total height: 3,500 mm, overall weight: 3,000 kg, Equipment: safety light barrier, Well-maintained 4-column hydraulic press from a facility closure. The machine is fully functional and was in production use until recently. It has been modernized and features an overhauled digital Siemens control system. Additionally, it is equipped with a safety enclosure and SICK brand light curtains. Lasdpfxey Sglws Aiijb The machine is currently in storage but is available for inspection upon request.

Year of construction: 1994, condition: ready for operation (used), A hydraulic transfer molding press Lauffer is available. Press force: 125t, power: 15kW, hydraulic oil volume: 300l, machine dimensions X/Y/Z: approx. 2200mm/1400mm/3000mm, weight: approx. 6500kg. An on-site inspection is possible. Lajdpjyxgq Tsfx Aiisb

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm Lsdpfsxcblwex Aiieab table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm Laodpfx Ajx Uru Neiijb table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t Lodpfxstqqwuj Aiioab

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Lsdpfx Aijy S A Nfsieab

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation Lasdpfx Asdzp Treiijb - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) Laodpjyupulefx Aiisb - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm Laedpfovwgqrjx Aiiob stroke 600 mm table dimension - longitudinal 400 mm dimensions of the machine ca. 1400 x 1050 x 2350 m

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm Ledpfx Ajy Rur Noiijab table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm Laodpfxeyx Ihyj Aiijb with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm Lajdpswvva Sofx Aiieb oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm table height over floor 800 mm ram surface 40 mm Lodpfxev Svbce Aiijab feed down 120 mm/s feed up 510 mm/s working feed 21 mm/s oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1978, pressure 100 t stroke 150 mm throat 345 mm dayligth 400 mm table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm Ledpsvzxp Uofx Aiisab with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: used, Year of construction: 1993, pressure 100 t Lsdpevuuflofx Aiijab throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t Lajdpfxovuuckj Aiijb required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t Ledpfxjvut Rmj Aiijab stroke 307 mm throat 180 mm dayligth 900 mm table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm Ljdpfevut N Nsx Aiieab with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t Lodpfx Aiovut H Ijioab dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm Lasdpfxjvut Edj Aiijb stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm Laedpfxevzxphe Aiijb table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz Laedpfx Aofxyh Ajiiob :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Lsdpsy Nbtkefx Aiieab Table length: 2,500 mm Max. working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic power unit Control panel