Used Leadermac Speedmac 631 Not Weinig for sale (883)

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Hodpfxjyrrhpe Al Ssl Electronic spindle position adjustment as follows 1. 3rd spindle width adjustment. 2. 4th spindle thickness adjustment. 3. 5th spindle thickness adjustment. Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW Right 11kW Left 11kW Top 11kW outboard bearing Right 11kW Left 11kW Top 11kW outboard bearing Bottom 11 kW outboard bearing Bottom 22 kW outboard bearing Possible to add jointers as needed. CNC position on spindles 3,4,6 and 7. Hjdpfx Alexcft So Sel Large quantity of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: reconditioned (used), LEADERMAC THUNDERMAC 923T SPINDLES: 9 X 50MM X 6000 RPM Hjdpfey Ahi Sjx Al Sjl BOTTOM (22 KW) - RIGHT (15 KW) - LEFT (15 KW) - RIGHT (15 KW) - LEFT (15 KW) - TOP (22 KW) - BOTTOM (22 KW), TOP (22 KW) - BOTTOM (22 KW). WORKING WIDTH: 230 (245) MM, HEIGHT: 160 MM. MAX FEED SPEED 80M/MIN (POSSIBLE TO INCREASE TO 150M/MIN) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: reconditioned (used), Leadermac Thundermac 923T Hsdpfx Aleyl Rmds Ssl Spindles: 9 x 50mm x 6000 rpm Bottom (22 kW) - Right (15 kW) - Left (15 kW) - Right (15 kW) - Left (15 kW) - Top (22 kW) - Bottom (22 kW), Top (22 kW) - Bottom (22 kW). Working width: 250 mm, height: 160 mm. Max feed speed 100m/min (Possible to increase to 150m/min) Straight jointers. Profile jointers. Connection: 380 V / / 50 Hz 400 amps. Full Documentation included.

Condition: excellent (used), Year of construction: 2005, High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an hydraulic unit (max 127m/min). Hodpfxoy Hb Uvj Al Sel A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer.

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS Hsdpfx Aley Hb Uij Sjl DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER Hedey Hb Upopfx Al Sol OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 450MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Hjdpfxjy Hb Ucj Al Sjl Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. PRECISION TOOLING:  USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. Hsdjyxxgmjpfx Al Sol ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. INCLUDED: 40MM OR 50MM ARBOR AS NEEDED OPTICAS SETTING STAND

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Bandsaw width 130mm Saw motor power 2 x 30 kW Hydraulic feed with centering. 7.5kW hydraulic pump Saw blade lubrication tank 2 x 6l Hodpfxoyub Hme Al Sel Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Hedpoycuqnofx Al Sol Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. Hjdpeth Taasfx Al Sel It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. Hjdpfeq Dzi Tjx Al Sjl 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: new, Year of construction: 2026, MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM Hjdpfjy Hcaajx Al Sjl MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: new, Year of construction: 2026, MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN Hodpsy Hb U Njfx Al Ssl AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: used, Year of construction: 2004, Speed 60 m/min 8 workstations Hodeyll D Rjpfx Al Ssl Digital positioning Chrome table Thrust bearings Lubrication 400V

Condition: like new (used), MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM Hodpfxjy D Akmj Al Ssl MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: used, Used machine Year of manufacture: 2004 Features and technical specifications: - Operating hours: 5000 - Planing width: 230 mm - Planing height: 120 mm - Number of spindles: 6 - Bottom spindles: 2 - Right spindle: 1 - Left spindle: 1 - Top spindles: 2 - Spindle arrangement: bottom / right / left / top / top / bottom - Motor power in kW: 11 / 7.5 / 7.5 / 11 / 11 / 11 - Maximum spindle speed: 6,800 rpm - Spindle diameter: 40 mm - Feed rate: max. 30 m/min - Feed: variable - Feed motor: 4 kW - Main drive motor: 11 kW Hedpfxjyxyaus Al Sjl - Pre-planing cutterhead - Table surface chromed - Infeed table length: 2,000 mm - Driven table rollers - Lubrication pump: manual - Top pressure: pneumatic - Drive: Cardan shaft feed rollers - Total installed power: 80 kW - Dimensions: 4,100 x 2,050 x 1,900 mm The machine is offered without tooling; used tooling can also be sourced on request. Availability: approx. mid/end of April Location: Netherlands

Condition: used, Year of construction: 1996, Weight: 3.500 kg - Year: 1996 - Documentation available: No - CE certificate present: No - Serial number: 10.6654 - Input table length [mm]: 8800 - Output table length [mm]: 6650 - Voltage [V]: 400 - Fuse [A]: 25 - Power [kW]: 8.0 - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT Hsdpfx Asy Il Ucol Sjl VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), functionality: fully functional, Weinig Servolock cutterhead clamping tool. Hjdpey Hrc Rjfx Al Ssl The ServoLock tool simplifies clamping cutterheads on the spindle like never before.

Condition: good (used), Year of construction: 1990, Working width: 220 mm Working height: 120 mm Number of spindles: 5 Spindle arrangement: bottom / right / left / top / bottom Motors: 7.5 KW, 11 KW, 11 KW, 11 KW, 7.5 KW Table lubrication Feed drive: 2.2 KW Feed speed: 6/22 m/min Year of production: 1990 Machine dimensions: - Length: 4400 mm Hsdjy Hf A Rspfx Al Sel - Width: 1700 mm - Height: 1250 mm - The machine comes with 4 heads mounted on the spindles ( 2 x 180 + 2 x 120 mm ) - The machine comes with lots of extra tools / heads / infeed wheels / Keys

Year of construction: 2005, condition: ready for operation (used), This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine. • Groove guidance and hydraulic nuts • Working range (wxh): 230 x 120 mm Hodpfjyaihpsx Al Sjl • Number of spindles: 5 • Variable feed speed: 4 – 30 m/min • Spindle power output: bottom (infeed): 4 kw / right / left: 7. 5 kw each / top: 7. 5 kw / bottom (outfeed): 4 kw Additional equipment • Includes approx. 70 cutter heads Z4 • Several hundred new serrated-back knife blanksIt is possible to buy WEINIG Unimat 500 alone (without Weinig Rondamat 931 profile knife sanding machine and additional tools) for a price of 37.000€

Condition: good (used), functionality: fully functional, Planing width 610 mm Sturdy cast iron construction Jointer fence Auxiliary stop 4 kW, 380 Volt 2-key cutterblock Tables fold upwards Machine ready for immediate use Hodjx U Dgdopfx Al Ssl Transport possible at extra cost!

Condition: excellent (used), Number of boring spindles 6 St. Working width 220 mm Working height 120 mm Hedsyiu R Iepfx Al Sjl Length of the planing table 2.000 mm Feed motor 5,5 kW Feed speed 36 m/min. Grooved table Ja Ja

Condition: used, Year of construction: 2007, from training workshop, public institution, chrome-plated stops and machine table used, excellent condition, low hours, top equipment Manufacturer: Weinig Model: Unimat 300 Year of manufacture: 2007 Number of spindles: 5 Spindle arrangement: bottom-right-left-top-bottom Motor brakes Motor ratings: Hedpfevwghkex Al Ssl jointer: 5.5 kW right and left: 7.5 kW each top: 5.5 kW bottom: 5.5 kW Planing width approx. mm: 20-230 Planing height approx. mm: 8-160 Spindle diameter mm: 40 Table length approx. mm: 2000 Preliminary cutter Pneumatic pressure rollers Protective hood Table lubrication via lubricating pump Feed before jointer Feed speed stepless 5-30 m/min. Profiling diameter: 125 – 200 mm Electronic thickness adjustment Complete digital displays incl. profiling Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in current condition, as inspected, without warranty or guarantee.