Used Lefa Zpm 60 Liter for sale (24,675)

Condition: good (used), Year of construction: 1996, Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with attachments -Tank capacity: approx. 60 liters Hedpfx Alepix Nco Sel -Individual components: see photos -Dimensions: 730/670/H620 mm -Weight: 74 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) Hsdowc Afhopfx Al Sol One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: SN49983, functionality: fully functional, Chamber Furnace, Very Good Condition. 12 Months Warranty - Max temperature 1300°C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - Heating on 5 sides - Inlet and exhaust air with dampers, electrically operated via Belimo actuators - Intake fan controlled by frequency converter via controller - JUMO control system (switchable to other languages!) - Additional type S trailing element for external data recording - Documentation - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection variant: prepared for fixed connection, 32A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, baking oven, tempering oven, laboratory furnace, hardening furnace Hodpfxsx U Ekds Al Sol

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, in very good condition. 12 months warranty. Hsdotbq Eqjpfx Al Ssl - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Inlet and exhaust air with dampers, electrically driven by Belimo actuators - Intake air fan controlled by frequency inverter via regulator - Stainless steel exhaust hood - Bentrup 507 control system, thyristor controller - Controller language: German only, cannot be switched to other languages! - Additional slip ring element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current: 26 Amps - Supply voltage: 3/N/PE 400 VAC - Connection type: prepared for fixed installation, 32 A plug - Documentation and CE declaration - Electrically tested with current DGUV test protocol Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing oven, tempering furnace, laboratory furnace, hardening furnace.

Condition: new, Year of construction: 2026, functionality: fully functional, New machine Hsdpshydmdofx Al Ssl 24 months warranty Advantages: + TOP price-performance ratio + powerful planetary mixer with digital control + 10 speeds with constant power transmission + with stainless steel ingredient chute and safety grid + when lifting the grid the machine switches off immediately + with integrated dust / splash protection cover + machine stands on 4 vibration-absorbing adjustable feet + no floor anchoring necessary + hydraulic boiler lift with two safety switches + stainless steel boiler support arms + closed planetary gearbox made of stainless steel + can also be used with optional 60 liter equipment + fast spare parts supply within 1-2 working days SERIES accessories, included in the price: - 1x 80 liter stainless steel kettle - 1x whisk for 80 liters kettle - 1x flat beater for 80 liter bowl - 1x dough hook for 80 liter kettle SPECIAL accessories, optionally available at extra charge, prices on request: - additional 80 liter stainless steel bowl - additional tools (beater, flat beater, dough hook) - boiler trolley for 80 liters boiler - 60 liter equipment (1x 60 liter stainless steel kettle + 3 tools for 60 liter kettle) - Kettle trolley for 60 liter kettle Technical data: - Motor power: 4,5 kW - rpm at 50Hz: 133 - 400 (stage 1 - 10) - fuse protection: 16A-CEE plug - Connected load: 400V - 3Ph - 50Hz - dimensions: 720 x 1050 x 1660 mm (WxDxH) - max. 1910 mm height when hood is opened - net weight: 450 kg

Condition: new, Year of construction: 2026, functionality: fully functional, New machine 24 months warranty Advantages: + TOP price-performance ratio + powerful planetary mixer with digital control + 10 speeds with constant power transmission + with stainless steel ingredient chute and safety grid + when lifting the grid the machine switches off immediately + with integrated dust / splash protection cover + machine stands on 4 vibration-absorbing adjustable feet + no floor anchoring necessary + Boiler lift with lever + boiler support arms made of stainless steel + Closed planetary gearbox made of stainless steel Hodpfshydl Isx Al Ssl + can also be used with optional 30 liter equipment + fast spare parts supply within 1-2 working days SERIES accessories, included in the price: - 1x 60 liter stainless steel kettle - 1x whisk for 60 liter kettle - 1x flat beater for 60 liter bowl - 1x dough hook for 60 liter kettle SPECIAL accessories, optionally available at extra charge, prices on request: - additional 60 liter stainless steel bowl - additional tools (beater, flat beater, dough hook) - vessel trolley for 60 liters vessel - 30 liter equipment (1x 30 liter stainless steel kettle + 3 tools for 30 liter kettle) Technical data: - Motor power: 3,0 kW - rpm at 50Hz: 165 - 450 (stage 1 - 10) - Connected load: 400V - 3Ph - 50Hz - 16A-CEE plug - dimensions: 690 x 940 x 1470 mm (WxDxH) - max. 1710 mm height when hood is opened - net weight: 300 kg

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Hodpen Atm Dsfx Al Ssl The oil drip tray is used for the storage of non-spillable or opened containers such as paint cans, paint buckets, cleaning agents, etc. The oil drip tray can be optimally placed in a shelf rack. The scope of delivery includes: 01x oil drip tray, II. choice (new goods) Manufacturer: SSI Schäfer Type: OAW 4800 Material color: sendzimir galvanized Capacity: approx. 60 liters load capacity: 200,00 kg total width: approx. 1.020 mm Usable width: approx. 970 mm Total depth: approx. 790 mm Usable depth: approx. 784 mm Total height: approx. 125 mm Useful height: approx. 95 mm Material thickness: approx. 3.00 mm Weight | pc.: approx. 26,960 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Hsdpfx Aleya Ev Ne Ssl Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: new, PRICE: 1800 EUR The machine is characterized by simple operation, easy cleaning, and maintenance as well as stability during operation It is suitable for factories dealing with meat processing, restaurants, kitchens, and other catering facilities Dimensions: 850× 450× 850mm Hedpeikvrdjfx Al Sel Electrical power: 0.12kW Volume: 60 liter Delivery time: immediately after the advance payment (100%)

Condition: excellent (used), CTS Type: C-40/60 CTS small climate chamber air-cooled Test volume: 60 liters Temperature range: -40 °C / +180 °C Humidity range 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dimensions (WxDxH): Inside: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal voltage: 230V 1/N 50 Hz Output: 3.3 kW Hsdpfx Alju Hlb Ej Sjl Rated current: 13 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Hjdpfxsxr A R Te Al Ssl Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Hsdpfx Asx Hglyol Sjl Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.

Year of construction: 2024, condition: new, functionality: fully functional, New machine with 24 months warranty Stainless steel model Advantages: + mobile machine, with locking rollers + completely made of stainless steel + Production and preparation of choux pastry, pastry cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires even heating and mixing + Thermal oil circulates in the double tank wall, designed for safe and easy use + triple wall for optimal thermal insulation + with side and bottom wipers + electronic thermostat for setting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + boiler is simply tilted via crank wheel for emptying (optional: with drain cock) + two working speeds + safety switch in case of overheating + fast spare parts supply within 1-2 working days SPECIAL accessories, optionally available at extra charge: Hjdpfoivdubox Al Ssl - Discharge tap, for quick, easy emptying: + 860,-- € net - Machine with frequency converter, for stepless stirring speed: + 1.275,-- € net (delivery time + 5 to 6 weeks) Technical data: - capacity: 60 liters - max. temperature: 150°C - thermal oil volume: 17,5 liters - heating power: 6 kW - Stirring speed: 46 rpm & 92 rpm (1st / 2nd gear) - Motor power: 0,6 kW / 0,8 kW (1st / 2nd gear) - Connected load: 400 V - 3Ph - 50Hz - 32A CEE plug - dimensions: 960 x 780 x 1635 mm (WxDxH) - filling height: 1200 mm - Net weight: 150 kg

Condition: good (used), functionality: fully functional, used sourdough machine Isern Häger 600 RMS, for 1000 liters, in bakery condition (good condition), machine no. 06910004, 2.3 kW, 400 V, 50 Hz, weight 420 kg Hsdpfx Aowwwdhol Sjl

Condition: excellent (used), Year of construction: 2015, COMPLETE PELLET PRODUCTION LINE 6 t/h Hodpfx Aoqy Hcdsl Sel Hydraulic walking floors - double for hard and soft wood Conveyor belt 12m with magnetic separator for chips Two hammer mills each 130 kW for wet material Two beams with hydraulic floor befor drum dryer Dryer for drums of 12 m FIEDLER boiler 3.5 MW Refiner 250kW with transport fan and filter Silos bin ZEPI for dry material Z conveyor ZEPI above three silo bins for pellet mill 0qe0k TRI Pellet Mill ZEPI ZPM600 with 200kW (2pcs) and 160Kw Pellet mill production year 2015 (two pcs) Conveyor belt 10m for hot ball, conditioner and aspirin system vibro sieve ESSEGI packaging system (ITA) 2019 Pallet system ROBOTIK KOGLER (SLO) 2015 Grecon spark detection system Electrical cabinet room for complete equipment Line in operation, capacity 6-7 t/h

Condition: good (used), Technical condition: very good Visual appearance: very good Warranty: weight: 1600kg Nice, well-functioning grabber fitted with new pins and bushings checked and tested Hjdpfx Aljyy Dxqj Sjl Please contact Ferdinand Pater for more information Fuchs HDMS 600 Liter New points welded on tines hydraulic tested new pins and bushings transportation can be arranged

Condition: excellent (used), mileage: 770,076 km, power: 265 kW (360.30 HP), first registration: 06/2010, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,450 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 9,220 mm, total width: 2,530 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2010, XLEG6X20005235679 = More information = General information Cab: single Registration number: BX-PT-28 Technical information Number of cylinders: 6 Engine capacity: 12.740 cc Hsdpfsyycfpjx Al Sjl Axle configuration Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7500 kg Weights Empty weight: 11.760 kg Carrying capacity: 16.340 kg GVW: 28.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, Kilia Kutter Vacuum 30 6000 Vario Hsdpfx Aloyv Uwco Sjl Knife speeds Mixing/Cutting (RPM): 500 to 5100, variable Knife speed (m/s): 80 Stepless knife drive Stepless bowl drive Vacuum lid hydraulic Time/rounds cut-off Temperature cut-off Central lubrication Remote control Bowl volume L/kg: 30 L / 21 kg Bowl rotations RPM: 7 to 20, variable Touch and manual control Electric knife cover drive: optional Cooking/cooling device: optional Recipe manager KPV: optional Customer-side pre-fuse: 25 A gG/C Rated connected load: 15 kW

Condition: excellent (used), Technical condition: very good Visual appearance: very good Hodpfjt Dlq Hjx Al Sel Price: On request Please contact Ferdinand Pater for more information

Condition: good (used), mileage: 565,000 km, power: 250 kW (339.91 HP), first registration: 06/1997, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, gearing type: mechanical, suspension: steel-air, total length: 8,200 mm, total width: 2,500 mm, total height: 3,750 mm, loading space volume: 16 m³, Year of construction: 1997, Equipment: air conditioning, differential lock, electric window regulation, power assisted steering, = Additional Options and Accessories = - Aluminum fuel tank - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Sun visor - Toolbox = Additional Information = Front axle: Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Leaf spring Rear axle 1: Twin tires; Differential lock; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: Air suspension Rear axle 2: Lift axle; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Air suspension Number of cylinders: 6 Gross vehicle weight: 26,000 kg Technical condition: good Hjdpfeymn U Ujx Al Sel Optical condition: good Please contact Andre, Henri, or Andre for further information.

Year of construction: 2016, operating hours: 9,195 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chamber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 9195 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Hedpfx Aot Txttel Sol Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Year of construction: 2016, operating hours: 14,242 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Hsdpjt Txqrofx Al Sol Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: good (used), Weiss climate test chamber with humidity Here we offer you a Vötsch environmental test chamber with humidity. Vötsch 4060-10 air-cooled with humidity Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 2150 mm, width: 1225 mm, depth: 2890 mm Test chamber capacity: approx. 600 liters Operation hours: 3354 h Year of construction: 2007 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Hjdpfxst E Sfgo Al Ssl Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.8 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 9.5 K/min Cooling 12.0 K/min Heat compensation at 20°C max. 8000 W Heat compensation at -20°C max. 3000 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10% to 95%r.H. Temperature homogeneity in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation in time 1 to 3 RH% Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 16,0 kW Rated current: 26.0 A Refrigerant: R-404A The rail pair is available for rolling. Two chambers bottom, one complete, one with hole diameter 300mm. Weight (approx.): 1020 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: used, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K Hjdpeygum Dofx Al Ssl (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Access Ports: 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Year of construction: 1996, condition: good (used), Compressed air breathing apparatus, respiratory protection -2 bottle device -Overpressure with: pressure reducer Hodsb A H Afjpfx Al Sel -High pressure manometer -Demand valve with: integrated warning device -Thread connection: M 45 x 3