Used Leuco Proline for sale (65)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Description AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronous running brush for chips removal. Material clamping is performed by a full-stroke sectional vice. The material feed is manual. The cut material outlet is fitted with a slide. The saw band drive is equipped with a frequency convertor that allows the band’s optimal speed to be set against the processed material within the 20-120 m/min range; this significantly increases both the saw band lifetime and the machine productivity. Further, the band is tilted against the vice load surface at 2° angle, which also significantly reduces cutting times and contributes to a longer band lifetime. Thanks to their arms rigidity, double-column bandsaws with a fixed arm position achieve much shorter cutting times (especially in cutting full materials) than machines with articulated saw arms. Key features Both-sided linear guiding of the saw arm Nsdpfx Aovk R R Neqxjdc Arm laid on linear guiding Automatic downfeed pressure regulation Simple and clearly arranged control

Condition: used, Saw blades for the professional, machine-based processing of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: HW WZ Z72 - Cutting circle (ø): 494 mm - Bore: 30 mm - Width: 3.7 mm - Material: Steel Ndsdpszrx T Rjfx Aqxsc

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Waste material shredder, Hacker wood shredder, chipper, shredder MHR630 proline The MHR proline series consists of robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and industrial enterprises seeking an economical yet powerful solution. Advantages: Ndodpfxjz Tddve Aqxjc - Continuous, uniform shredding process - High performance with low energy consumption - 2 rows of knives for increased throughput - Robust construction - Larger feed opening - Excellent value for money - Ready for connection - Controlled by Siemens PLC - MHR630 proline Rößler waste material shredder – “Made in Germany”

Condition: like new (used), Year of construction: 2022, functionality: fully functional, For sale is a high-quality BOMAR Proline 420.350 H. This machine impresses with its robust two-column design, high cutting accuracy, and ease of operation. It is ideally suited for professional use in the steel trade, metalworking, mechanical engineering, and industrial manufacturing. Thanks to the stable guidance of the saw arm and the steplessly adjustable band speed, the machine enables economical and precise cuts, even with demanding materials. The Proline series is considered a reliable industrial machine with a long service life. Technical data: Manufacturer: BOMAR Model: Proline 420.350 H Type: Semi-automatic Design: Two-column band saw Cutting angle: 90° Max. round material: Ø 350 mm Max. rectangular material: 420 × 350 mm Saw band dimensions: 4,780 × 34 × 1.1 mm Band speed: steplessly adjustable 20–120 m/min Drive power: 3 kW Power supply: 400 V / 50 Hz Material support height: 780 mm Machine weight: approx. 800 kg Machine dimensions (L × W × H): approx. 2,325 × 1,197 × 1,997 mm Equipment: Robust two-column guide Steplessly adjustable cutting speed via frequency converter Hydraulic saw feed Automatic cutting pressure control Split full-stroke clamping device Carbide saw band guide Coolant system Nedszlz N Iepfx Aqxjdc Chip brush Industrial design for continuous operation Condition: Used Technically functional Ready for immediate use Inspection under power is possible by appointment. Scope of delivery: Band saw BOMAR Proline 420.350 H 4m roller conveyor on the feed side 4m roller conveyor on the discharge side Manual measuring stop Operating manual (digital) Accessories as per inspection Inspection / Shipping An inspection of the machine is highly recommended. Loading can be supported upon agreement. Transport can be arranged upon request. Errors, changes, and prior sale reserved.

Condition: used, Year of construction: 2023, functionality: fully functional, overall weight: 1,930 kg, Binderberger GI25EZ proline horizontal meter log splitter Nsdpfx Aoyg I Dpeqxjdc Year of manufacture: 2023 Weight: 1,930 kg Operation: electric or PTO Towable with secondary registration plate up to 25 km/h Splitting length: 130 cm Splitting speed (cm/s): forward: 25/27, return: 23/25

Condition: used, mileage: 178,613 km, power: 118 kW (160.44 HP), first registration: 06/2010, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 10/2028, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, Internal vehicle number: G170470 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The auxiliary battery needs to be replaced. Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 06/2010, registered as a self-propelled working machine, green license plate - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer under the frame Nedpfx Aozpcx Ejqxedc - Reinforced shock absorbers - Roof and rear door, tall version - Auxiliary hot air heater - Rotating beacon, yellow, front left/rear right - Rear door, two-wing, 270 degrees - Mileage: approx. 178,613 km TV inspection system - RCA proline with satellite - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel jib with winch for lowering the camera/carriage - 1 carriage L 135 for main pipes DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional lighting, halogen, inclination measurement, and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G170470 * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, manufactured in 2003 - Ideal for high-quality furniture production; HPL and matte finishes are no problem - Machine is completely controlled by PLC; almost everything can be adjusted at the control panel; no defects; well-maintained machine, used with expertise. Leuco Z3 joiner cutter installed; second set of cutters available; various insert cutters available. Maximum board thickness approximately 48 mm; edge banding from 0.3-15 mm possible. Chain conveyor renewed approximately 10 years ago. Spray system for separating and cleaning agents, controlled according to application. -Motorized, program-controlled joiner fence. -Joiner cutters 1961, 2 x 2.0 kW. -Glue system, cartridge type 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color changes easily possible, PU also possible. -Pressure unit 1903 MOT, pressure of the first and other rollers can be adjusted separately. -Miter saws 1918, bevel cuts adjustable. -Flush trimming 1823. -Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable at the control panel). -Profiling blade 2 mm 1929, pneumatically controlled. -Corner copying unit 1983, carbide-tipped, with adjustment at the control panel, functional, but needs to be fine-tuned. -Straight profiling blade 1964. -Scrap conveyor, controlled according to application. Includes all operating manuals; documentation of process steps digitally and in printed form, provided by Holzher technicians. One set of DIA joiner cutters is included, as well as various insert cutters for the cutting units. Return conveyor system ZHR 15 Boomerang, manufactured in 1995. Attached to the machine, with connection to the pressure bridge. Easily adjustable from the control panel, with rotating device for components. Adjusted to the feed rate; sensors still available from HOMAG. Nodsz Dxh Njpfx Aqxsdc -Information without guarantee; the parties agree that the sale of the used machine will take place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase.- Sale only to commercial businesses; the machine is currently powered and in operation. Price negotiable. Machine available after clarification in December / January 2027. Crane or forklift loading also possible from an external warehouse.

Condition: new, functionality: fully functional, Endress + Hauser Proline T-Mass 651-30AB1AD1AAABCA Thermal Mass Flow Meter 6 pieces available Ndsdpfxjznw Hzs Aqxsc Brand new, unused, ex stores stock. Sold as seen.

Condition: used, Technical data: - Blade: HW Z72 - Cutting circle (ø): 500 mm Nodpfxozrx Ubs Aqxsdc - Bore: 30 mm - Width: 3.8 mm - Material: Steel

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Nsdozfy Ivepfx Aqxsdc Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Njdpfjzmp Nrsx Aqxedc

Condition: excellent (used), Year of construction: 2021, PROLINE 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Ndodpfsgb Rklox Aqxec included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Automatic tank cleaning with dredge - Abrasivtank and automatic abrasive doser

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: Nsdpezva Spofx Aqxodc - Blade: WP Z8 V8 - Flight circle (ø): 220 mm - Bore: 70 mm - Length: 14 mm - Material: steel

Condition: used, -Serial number: 19200044 -Year: 15/01/2019 -Production: up to 1800 pieces/hour Nodpfx Aqewxymzjxsdc -Max dough piece weight before elongation in g: 700 -Max dough piece weight before rounding in g: 550 -Trough length in cm: 30 -Trough width in cm: 13 -Number of troughs: 90 -Number of usable troughs: 65 -Capacity (pieces/hour): 960 1200 1400 1800 -Resting time in min: 5:00 3:15 3:00 2:00 -Voltage: 400V -Power: 4.8 kW

Condition: used, mileage: 94,336 km, power: 110 kW (149.56 HP), first registration: 04/2008, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, total width: 1,993 mm, total height: 3,000 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Mercedes Benz Sprinter 315 CDI with Rausch TV inspection system - RCA Proline with Sat Installed equipment: * RCA Proline control unit * ELKA 600 cable drum with approx. 250 m camera cable (renewed 2019) * Quattro SAT cable drum with approx. 90 m camera cable and 2 separate push rods approx. 18 m each * Swivel jib with winch for lowering camera/crawler * 1 crawler 1500 with KS200 head for main pipes DN200 to DN1500 * 1 SAT crawler with KS200 head and 2x KS60 SAT cameras * 1 crawler 1100 DN100 - DN250 * Additional halogen lighting, inclination and deformation measurement * Flushing device for cleaning house connections (add-on part) * Computer package with monitors (software for vehicle and office workstations included) * Reversing camera with monitor for driver for positioning vehicle with rear doors open * Water tank * Power supply via generator Chassis: * Mercedes Benz Sprinter 315 CDI, panel van, color: white * First registration: 04/2008, self-propelled working machine, green license plate * Fuel: Diesel * Wheelbase: 3665 mm * Engine output: 150 HP * Reinforced rear and front axles (shock absorbers) * Reinforced stabilizer front axle * High roof and high rear doors * Auxiliary hot-air heater, air conditioning * Amber rotating beacon front left / rear right / front * Rear door double-winged, 270-degree opening angle Special equipment: Rear door (270-degree opening angle), radio pre-installation, spare wheel with road tyres, spare wheel carrier under rear frame including jack, revolving beacons (2), passenger seat comfort, driver’s seat: comfort suspension, stabilizer rear, reinforced front stabilizer, reinforced shock absorbers, aux air heater (electric), partial limitation cargo area sliding door Additional features: Third brake light, driver's airbag, wash water level indicator, electrically adjustable and heated exterior mirrors, both sides, exterior mirrors with integrated indicators, 74 Ah battery, brake assist, driver's cab headliner, lockable glove compartment, body/build: high-roof panel van, child safety locks, fuel tank: main tank 75 liters, continuous partition in load compartment, load securing/tie down rings, headlight range adjustment, engine 2.1 liters - 110 kW CDI CAT, wheelbase 3665 mm, low-emission according to Euro 4 Gr. III emissions standard, sliding door right in load/passenger compartment, steel rims 6.5x16, service interval display Assyst, heat-insulating glass, permitted gross vehicle weight 3.50 t For further details and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Ndodpfszit Uksx Aqxec Specification, prior sale, and errors subject to change. The buyer is responsible for independently inspecting the condition and specification of the equipment. Year of manufacture for the chassis and the inspection system/superstructure may differ. Sale is strictly in line with our terms & conditions and with all warranties excluded.

Year of construction: 2003, condition: excellent (used), For sale: KURTZ cutting line mod.VBR-S3 (Complete set: cutting KURTZ mod. VBR-S3, KUKA selection robot, packaging VIRO mod. PPZA-1300/24/MZG, palletizing, wrapping) EPS block cutting line with maximum dimensions of 5000x1200x1200. A block option of 600x1200x2400 is also available Complete line in "U" arrangement, consisting of: Ndodpfeuct Upjx Aqxoc - Block buffer loading by dump truck - Horizontal cutting with automatic wire positioning, with double-frame cutting and oscillation - Polystyrene waste/scrap removal system: top, bottom, sides - Side cutter with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic robot for product selection - VIRO packaging machine - Rotation of packages for cross stacking - It is possible to palletize different size polystyrene boards on wooden pallets or on glued polystyrene strips under the column with stacked polystyrene packages - Automatic stacker/palletizer for creating columns up to 3 meters high and up to 3 meters long - Vertical wrapping machine for automatic stretching of columns of polystyrene packages - Complete with inkjet printers and automatic labelers - Siemens S7 PLC controller - Complete with safety barriers with switch type protection - High-capacity line, in very good condition, requires an area of about 600 m2 (40m x 15m) - Year of manufacture: 2003 - Electricity requirements: 400V; 50 Hz; 115 kW; 300A

Condition: new, Year of construction: 2020, 1x New Endress & Hauser Promass E 300 and also 1x New Endress & Hauser Promass F 80 Ndsdpfx Asxtvfmeqxsc

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3084-2AA99 -Power: 50 Hz 1.6 kW 2845 rpm / 100 Hz 2.8 kW 5790 rpm Nodsvy Sx Tjpfx Aqxedc -Voltage: 220/380 V -Mounting shaft: Ø 30 mm -Quick clamping system: Leuco with saw blade Ø 190 mm -Dimensions: 395/210/H200 mm -Weight: 25 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3084-2AA20 Z -Power: 50 Hz 1.25 kW 2880 rpm / 100 Hz 2.0 kW 5885 rpm -Voltage: 220/380 V -Mounting shaft: Ø 30 mm -Quick clamping system: Leuco with saw blade Ø 200 x 3.2 mm -Dimensions: 390/300/H220 mm -Weight: 36 kg Nodpovydflefx Aqxodc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems Ndedpfx Aszmrw Sjqxsc • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3108-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5880 rpm Ndsdpjvydbgsfx Aqxec -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Quick clamping system: Leuco with saw blade Ø 196 x 3.6 mm -Dimensions: 665/233/H235 mm -Weight: 48 kg

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Ndsdpozizrkefx Aqxoc Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2019, Used machine Nedpfx Aqozpzy Ijxsdc Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) Ndsdpfx Aqex Huhcexoc • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: used, mileage: 257,232 km, power: 120 kW (163.15 HP), first registration: 03/2013, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 10/2028, color: white, gearing type: mechanical, Year of construction: 2013, Equipment: air conditioning, Internal vehicle number: G300109 Available immediately at our yard in Kaufungen. More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 2013, registered as a self-propelled work machine, green registration - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer mounted under the frame - Reinforced shock absorbers - High roof and rear door - Auxiliary hot air heater - Rotating beacon, yellow, front left / rear right - Rear door, two-leaf, 270 degrees TV inspection system - RCA proline with Sat - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel gantry with winch for lowering camera/carriage - 1 carriage L 135 for main sewers DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional halogen lighting, inclination measurement and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G300109 Nsdpjzpcx Sefx Aqxedc * Purchase price: € 39,500.00 * Down payment: 10% * Term: 60 * Monthly rate: € 624.93 Residual value: € 7,980.00 If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.