Used Life Tecnologies Onetouch Es for sale (8,875)

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Ppjdpfexzg Ubox Al Sor Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch ES This unit does not come with the Ion Torrent OneTouch ES Enrichment component of the Ion OneTouch 2 template amplification & ample preparation system 110-240VAC 50/60Hz 0.5 Amp Ppsdsxzg T Rjpfx Al Ser

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 The Ion OneTouch 2 Instrument performs template amplification as part of the manual workflow for the Ion PGM, Ion Proton, Ion S5, and Ion S5 XL systems. It provides scalable template preparation for all Ion semiconductor chips. The instrument has a small footprint and fits easily on any bench top. For a fully automated workflow, please see the Ion Chef Instrument. Ppedoxzg T Dspfx Al Ssr The Ion OneTouch ES enrichment module is not included in this purchase. For both the Ion OneTouch 2 Instrument and ES module Efficiency and flexibility The Ion OneTouch 2 instrument integrates multiple manual template preparation steps into a single system. This enables parallel processing of multiple samples per day through modular design. It is flexible and supports scalable template preparation for all Ion semiconductor sequencing chips with up to 400 bases on the Ion PGM, up to 200 bases on the Ion Proton System, up to 400 bases on the Ion 520 and Ion 530 chips, and up to 200 bases on the Ion 540 chip. The need for gas is eliminated by the use of a peristaltic pump. Contributing technologies At the heart of the Ion OneTouch 2 Instrument are three breakthrough technologies that enable automated delivery of the template Ion Sphere particles. The first is the reaction filter that creates millions of microreactors in which clonal amplification occurs. The second is the fully integrated thermal cycler and disposable path amplification plate that enables robust thermal cycling of the microreactors. The third is the integrated centrifuge, which recovers the template Ion Sphere particles. Altogether this allows the OneTouch2 instrument to deliver massively parallel clonal amplification and recovery, all in a small bench top footprint.

Condition: excellent (used), I am offering professional HURST hydraulic spreaders – Jaws of Life – used in technical rescue operations (fire departments, emergency services). Equipment from the renowned brand HURST Rescue Systems (USA) – a market leader in hydraulic rescue tools. Condition: - Fully operational and tested equipment. - Completely functional – ready for immediate use. - Displays normal signs of use (scuffs, marks – visible in the photos), which do not affect performance. Details: Manufacturer: HURST Rescue Systems Type: Hydraulic spreaders Application: Technical rescue, fire brigade Podpfx Alsyxta Ie Sepr Hydraulic quick couplings included Set includes: 2x HURST hydraulic spreaders Hydraulic hoses as shown in photos Applications: - Fire brigade (volunteer/professional) - Road rescue operations - Hydraulic power systems - Workshop and service operations. PRICE LISTED IS FOR 1 PIECE.

Condition: used, mast type: simplex, Charger Pjdpfx Aleynpwye Sjpr Mast type: Standard

Condition: used, mast type: simplex, Charger Mast type: Standard Ppjdpfx Alsynpwts Ser

Year of construction: 2011, condition: good (used), Newmix Atmi life sciences Ppodpfx Aljd Tw Izs Ssr Double jacketed paddle mixer 15883-005 2011, Stainless pharmaceutical mixer with 500L double jacketed mobile holding vessel, touch screen controls, Min - Max temp 0-90' degrees, jacket volume 6L, 1Ph

Condition: used, This listing is for the FluidX IntelliXcap 96 Decapper/Recapper. The unit is in full working condition and ready for immediate use. Designed for efficient, automated handling of 96-format sample tubes, improving workflow speed, consistency, and reducing manual handling in high-throughput laboratory environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Ppodpfx Aloy Hq Ape Sor

Condition: used, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 04/2014, Year of construction: 2014, Equipment: ABS, * ES-GE 3-STL low loader Pjdpsy Hzrnofx Al Sepr * First registration: 04-2014 * ABS * Wheel recesses * Steering axle * Unladen weight: 7,690 kg * More pictures and videos via WhatsApp * Details without guarantee; subject to prior sale.

Condition: used, machine/vehicle number: W09BLH3556EE32123, Year of construction: 2006, Please contact Theo Lelie for more information Ppjdpfx Aljy Dgkqj Ssr

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis: * Steel-welded construction with welded longitudinal beams and through Z-cross members, close cross member spacing for high floor load capacity Ppodpfjy Auhbex Al Ssr * Ramp storage between longitudinal beams behind the axle assembly under the loading floor. Two insertion pockets for one ramp each, with closure plate on the rear headframe Underride protection: * According to EU regulations Landing legs (front): * Landing legs with single-side operation Support (rear): * Two adjustable drop supports Axles: * 2 x 10 t air suspension axle units, manufacturer SAF, drum brakes approx. 300 x 200 mm, centered wheel mounting for twin tires, ABS, total air suspension stroke approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), control via hand lever with latch function Tyres: * 8x, 235/75R 17.5 – manufacturer of our choice, on steel rims 6.75 x 17.5, mounted with ET Spray protection: * Made of PVC in front of and behind the axles, according to EU regulations Load securing: * Outer frame with one hole every approx. 150 mm for tension straps, lashing force approx. 2.5 t (lashing straps can be fastened with sideboards closed, chamfered outer frame) * 6 pairs of foldable lashing rings, evenly spaced, tensile force approx. 8 t. * Stake pockets for removable stanchions 80/50: 3 pairs in the outer frame, evenly distributed Brake system: * Compressed air brake system in accordance with EU regulations with EBS * Two coils as a connection to the truck with red/yellow coupling heads * Spring-actuated parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame Front wall: * Removable from 25 mm high sideboard Lighting system: * Lighting equipment in accordance with EU regulations, 24 volts, multi-chamber rear lights, license plate lights, side marker lamps, and tail marking lights at the rear. Connection panel on the left of the towing bar, including connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with holders * Plug-in beacon at the rear * Additional 40 mm drawbar coupling (max. gross weight 13,500 kg) * Rear extension by approx. 800 mm incl. underride protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 removable stanchions made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20’ container * 1 x 20’ extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 x 25 mm sideboards and rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), including sideboard storage at the front near the headboard Paintwork: * Chassis shot-blasted, cleaned and premium hot-dip galvanized according to latest technology * Body components cleaned, primed and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 3002 carmine red * Sideboards: RAL 3002 carmine red * Kinnegrip stanc

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Pedpfey Auhzex Al Sepr Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, total width: 2,480 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Below is an excerpt from the equipment. Full specification available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched-through Z cross members; close cross member spacing for high floor load capacity * Ramp holder: Between the longitudinal beams, behind the axle assembly, under the loading floor, two slide-in pockets for loading ramps (one per pocket), with cover plate in the rear head frame Underrun protection: * In accordance with EU regulations Landing legs: * Front: landing legs with single-sided operation Psdpoy Auf Tefx Al Sepr * Rear support: two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, brand SAF, approx. 300 x 200mm drum brakes, center-bored for twin tires, ABS, total air suspension lift approx. 200mm (of which raise approx. 140mm, lower approx. 60mm), manual lever control with detent function Tyres: * 8 units, 235/75 R17.5 - brand of our choice. Mounted on 6.75x17.5 rims with offset Splash guards: * PVC splash guards in front of and behind the axles as per EU regulations Load securing: * On the outer frame, boreholes for lashing straps at approx. every 150 mm, lashing capacity approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 insert stakes: 3 pairs on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EU regulations with EBS * Two coils as coupling to the truck, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z hardwood floor recessed into the outer frame Lighting system: * Lighting system according to EU standards, 24 Volt, multi-chamber rear lights, license plate lights, side marker and lane departure lights at the rear, connection plate left at the drawbar, including connecting cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable flashing beacon at the rear * 40 mm towing device supplied (GVW max. 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable rigid drawbar in length, 6 x approx. 100 mm increments, with bolted 50 mm towing eye per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe insert stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Container locks 1 x 20' extendable to approx. 2,820 mm, compliant with ISO 1496, EN 284 or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technological standard * Body components cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Fittings: galvanized / KTL black

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Ppjdpfxeyz E T Se Al Ssr Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: used, functionality: fully functional, ES-300 ASTD cutting machine – fixed bridge saw for cutting marble, granite, and ceramics, model ES-300 A with automatic X and Z axis movement, rear stop with handwheel, and 2 idle roller conveyors. Psdpfsy Dch Eox Al Sopr

Condition: used, empty load weight: 9,140 kg, maximum load weight: 28,860 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 01/2007, loading space length: 11,600 mm, loading space width: 2,520 mm, loading space height: 890 mm, suspension: air, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 2 axles, air suspension, last axle steered, ABS (anti-lock braking system), extendable to 3 m, lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, support legs, twin tyres. Body: 2-axle low loader trailer with hydraulic loading ramps. All information without guarantee as the trailer is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Pjdpsyzgndofx Al Sjpr

Year of construction: 2016, condition: ready for operation (used), Life Technologies Amex 1000 Evos XL Core Digital Microscope Magnifications: 4x, 10x, 20x Dimensions: approx. 410mm x 320mm (D x W) Height: approx. 550mm Year of manufacture: 2016 You are welcome to arrange a viewing. We can organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Sale subject to prior sale. Ppjdpfx Aloyx A Sme Sor Visit our shop to view more of our listings. The specified company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the item description may occur and are subject to change.

Condition: good (used), Polar Mohr 78 ES Paper Guillotine Machine in very good condition, serviced and ready to use. Made in Germany. Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Podpjywdq Ijfx Al Sjpr Continuously adjustable pressure Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: used, Year of construction: 2007, Please contact Theo Lelie for more information ES-GE 6.SOU-4H-1N 6 axle semi / stepframe lowloader 12-2007 Airsuspension Last 4 axles Hydraulic steert Extra remote steering (by wire) First 2 Axle’s are lift axles Its own 24V electro-hydraulic powerpack Ppsdeyrtm Hepfx Al Ssr Loadingfloorlenght 11.000 mm + 6.000 mm extendible Width 2.550 mm + side extensions till 3.250 mm Weights in kg 6 x 10.000 kg axle load 25.000 kg fifth wheel load 84.000 kg total weight Ca 17.080 kg own weight Ca 67.920 kg loading capacity ABS

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You will find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment features. Full equipment details available on request. Chassis: * Welded construction made from high-quality steel sections with punched cross-members, designed for high point loads * Outer frame made of UNP steel Coupling device: * 2-inch kingpin Underrun protection: * In accordance with EC regulations, bolted version Side guard: * In accordance with EC regulations Landing gear: * Landing legs with single-sided operation, static load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air-suspended axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Wheel connection: centre-guided 10-hole with ET 0 * Total air suspension travel approx. 200 mm (raising approx. 140 mm, lowering approx. 60 mm), controlled via rotary slide valve with detent function Steering: * 1st axle as self-steering, 2nd axle fixed, 3rd, 4th, and 5th axles forced steered via linkage * Centralized grease points positioned externally Axle lift: * First and second axles automatically liftable, with additional manual override at the chassis Brake system: * Two-line compressed air brake system in accordance with EC regulations, with EBS and RSS, automatic load-dependent control, Wabco 4S/3M system * Spring brake cylinders as parking brake, tamper-proof coupling heads permanently mounted on the front cross member, without connection line to the tractor unit * Aluminum air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75x22.5 ET 0 rims – brand of our choice TPMS: * Tyre pressure monitoring system (TPMS) in accordance with ECE R141, with data transmission to tractor unit Mudguards: * In accordance with EC regulations, 1st axle front, 2nd axle rear, 3rd–5th axles each with 1/4 PVC mudguard front and rear * Rear mudguards with spray suppression flaps Load securing: * 5 pairs of folding lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of lashing rings in the side outer frame, evenly distributed (lashing capacity approx. 8 t) Stanchion pockets: * 10 pairs of stanchion pockets recessed into the outer frame * 6 pairs of stanchion pockets flush-mounted in the floor (outer longitudinal beam) Podpfx Aswx Dcasl Sjpr Removable stanchions: * 16 galvanized plug-in stanchions, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stanchion magazine: * Each side, in front of the front wall, a magazine for 8 plug-in stanchions approx. 80/80 mm Front wall: * Bolted corner stanchions filled with aluminum box sections, interior with full-width and full-height steel collision protection plate Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame, flush finished Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber rear lamps * LED side marker lights * LED position lights, white, front * LED marker lights, rear * Number plate lights, 1x 15-pin and 2x 7-pin connectors at front cross member Equipment: * Two chocks with holders * Warning board according to ECE 70 * Work light at the lamp bracket (activated via reverse gear) * Holder for rotating beacon at the rear (includes beacon) * Each side left and right: 1 permanently mounted access ladder, including plug-in step * Smart Board * 'Vehicle swings out' sticker, load centre marking sticker Paintwork: * Chassis and front wal

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) Podpfewx Dctsx Al Sspr * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: used, Manufacturer: Tennant Company (USA) Model: M20 Type: Industrial Scrubber-Sweeper (combination machine) Power source: Diesel, LPG, or Battery (depending on version) Cleaning Width: - Main brushes: ~1020 mm (40 inches) Podpfx Alewf E Drs Sopr - With side brushes: up to 1400 mm (55 inches) Solution Tank Capacity: 303 liters Recovery Tank Capacity: 360 liters Working Speed: ~8 km/h Approximate Weight (unloaded): ~2,177 kg Approximate Dimensions: - Length: ~2460 mm - Width: ~1220 mm - Height: ~1430 mm

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Ppodpfx Alexv A N Re Ser Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn The unit is in full working condition and is ready for immediate use AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Ppsdpfx Alsxhdwye Sjr Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types

Condition: excellent (used), Hydromotor for screw cylinder Injection unit size ES3550 Hägglunds Drives Type CA50 20 2 0 0 N 004 Ppjdpfx Alefnqagj Sor