Used Lincoln Idealarc Dc 1000 for sale (11,423)

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 Iajdpju Afttofx Ahzow Input current: 193/96.5A Input Hertz: 60 Input phase: 3 Input power: 230/460/3/60 Mode icon: DC/DC Output range: 150-1300A DC,16-46V Polarity: DC Nominal output: 1000A/44V/100%

Condition: ready for operation (used), Year of construction: 2022, Excellent condition – from 2022-2023 (we have a total of 10 units). Inspection welcome. Iaedpfx Aezb Rf Sjhzow

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Coil dispenser for wire Lincoln Idealarc DC-600 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Input current: 116/67/58A Input Hertz: 50/60 Input phase: 3 Input power: 220/380/440V/3/50/60 Output range: Iodpfx Aeu Afwlohzjaw CV:70A/13V - 780A/44V DC:90A/24V - 780A/44V Rated output: 600A/44V/100%. 680A/44V/60%.

Condition: used, DC motor, gear motor, electric motor, spur gear motor, manual transmission Isdpfedkf Igsx Ahzoaw -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg

Condition: used, Year of construction: 2019, The Horizon DC-1000S Docking Conveyor is an intermediate conveyor designed for use between a perfect binder and the HT-1000V three-knife trimmer. Isdpoxmg Edsfx Ahzeaw It receives individual book blocks from the binder, changes their transport direction, and delivers them to the downstream system in the correct orientation. This robust module is engineered for seamless and efficient integration with advanced Horizon bookbinding lines

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), Serial No.: VPA3852945, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ijdpfx Ahoi Edkwjzjaw

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), serial number: VPB8857184, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iedpfei Edk Tex Ahzeaw

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), Serial No.: VPB2855012, without hard drive, serial number as per photo, used, in good condition, 100% functional, scope of delivery as per photos. Iaedpfx Ahji Edk Njzow

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), SN: VPA4856158, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iaodei Edkzopfx Ahzew

Condition: ready for operation (used), Siemens 6BK1000-8AE60-1AA0, serial no. VPB2857466. Box PC 827B (DC), without hard drive, serial no. as shown in the photo. Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Iaedei Edlxepfx Ahzsw

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), SN: VPA6851923, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iedpoi Edk Esfx Ahzsaw

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), SN: VPB5856631, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iasdpoi Edkpsfx Ahzow

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), serial number: VPA3852938, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iedei Edktspfx Ahzeaw

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), serial number VPB9854111, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iaodpfji Edlbjx Ahzew

Condition: used, Year of construction: 2003, functionality: fully functional, Used REK cleaning system Very little used Full vacuum technology 12 kW distillation unit with hot discharge technology, Basket size 530x320x200 mm Iodpfjvyp D Tsx Ahzsaw The system has been technically tested by us for functionality. We can quickly provide training, commissioning, service, and spare parts. We have over 25 years of experience with REK systems. System dimensions: 2700x2500x2600 mm

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-0500PPV -Piston: Ø 100 mm -Stroke: 500 mm Iajdpfjdkzvtsx Ahzow -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Quantity: 1 available -Price: per piece -Dimensions: 138/H695 mm -Weight: 12.15 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-0140PPV -Piston: Ø 100 mm -Stroke: 140 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available Ijdpfx Aodkzvdehzeaw -Price: per piece -Dimensions: 138/H395 mm -Weight: 8.5 kg

Condition: excellent (used), Catalogue number 7268 TECHNICAL DATA - Loading hopper dimensions (top) L/W: 1000x600mm - Loading hopper dimensions (bottom) L/W: 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen: 16x12mm - Knife size: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions L/W/H: 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German production – Not repainted – Very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29,900 PLN Isdpfx Aozmgkgshzjaw Net price: 7,120 EUR (based on rate 4.2 PLN/EUR) (Prices may vary with currency fluctuations)

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Manufacturer: Miyachi Unitek Model: HF25 Ijdpfxezma Sds Ahzsaw Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Condition: Fully functional. Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. Iasdpfx Aszlr Syshzew The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 380 A, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table length: 1,320 mm, table height: 290 mm, throat depth: 180 mm, ram plate length: 500 mm, clearance between the columns: 900 mm, retraction force: 40 t, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,500 kg, controller model: Estun NC E21, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. Iasdpfx Aozlqkuehzew The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 150 mm, table width: 2,650 mm, table length: 32,000 mm, throat depth: 320 mm, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, overall weight: 9,800 kg, controller model: Estun E21, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. Ijdpozlpanofx Ahzoaw The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 20 mm, turning diameter: 180 mm, turning diameter over bed slide: 180 mm, total length: 81 mm, total width: 31 mm, total height: 37 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, metric thread diameter (min.): 5 mm, metric thread diameter (max.): 25 mm, metric thread steps: 5, bed width: 350 mm, rotational speed (max.): 2,500 rpm, mount diameter: 10 mm, type of input current: DC, overall weight: 40 kg, quill mount: MK 3, cone diameter: 18 mm, spindle mount: MK 3, motor model: bezszczotkowy, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, type plate available, The Digima DC TYTAN 350 is a compact lathe designed for precise machining of metals and plastics. It is an excellent solution for small workshops, service centres, garages, technical schools, prototyping facilities and hobby applications. Its compact dimensions allow it to be installed in a limited workspace, while its robust construction provides stability and accuracy during operation. The machine is equipped with a powerful 850 W brushless motor and a direct-drive spindle. This solution ensures quiet operation, smooth performance and a long service life. The continuously variable spindle speed of 50 to 2,500 rpm allows the operator to adjust the machining parameters to the material, workpiece diameter and type of operation. The Digima DC TYTAN 350 can machine workpieces with a maximum swing over the bed of 180 mm and a distance between centres of 350 mm. The spindle bore measures 20 mm, while the supplied lathe chuck has a diameter of 100 mm. The machine can also cut metric threads from 0.5 to 2.5 mm and imperial threads from 12 to 52 TPI. Ijdpfxozlgtxj Ahzsaw The TYTAN 350 is suitable for producing bushes, shafts, pins, spacers, prototype components, replacement parts and small production batches. It allows users to manufacture and repair essential components directly in their own workshop, reducing outsourcing costs and waiting times. The standard equipment includes a 100 mm three-jaw lathe chuck, a drill chuck with an arbor, an MT2 live centre, a fixed centre, a set of five turning tools, operating and adjustment keys, and a rear splash guard protecting the workstation against chips and coolant. The machine is CE-certified and supplied with an operating manual. The Digima DC TYTAN 350 is a practical, user-friendly and versatile mini lathe which, despite its compact size, provides the performance required for real workshop applications. Its standard 230 V power supply means that no industrial electrical installation is required, making it a convenient solution for both professionals and demanding hobby users.

Year of construction: 2026, condition: new, functionality: fully functional, total width: 3,310 mm, total height: 2,830 mm, lifting height: 1,800 mm, mast type: triplex, drive type: elektrohydrauliczny, permissible axle load: 4,500 kg, arm reach: 1,400 mm, arm spacing: 2,820 mm, platform width: 2,820 mm, section length (min.): 110 mm, machine/vehicle number: TW240E, control type: manual, Equipment: 3rd hydraulic function, CE marking, documentation/manual, double-sided, type plate available, The Digima TW240E car lift is a professional, automatic two-post lifting system designed for everyday use in automotive workshops, mechanical service centres and vehicle maintenance facilities. With a lifting capacity of 4,500 kg, it is suitable for safely lifting passenger cars, SUVs and selected light commercial vehicles. The maximum lifting height of 1,800 mm provides convenient access to the underbody and allows mechanics to perform repairs, inspections and maintenance work comfortably. Ijdpfxozlgc Hs Ahzeaw The TW240E features a robust base-frame construction with a floor-mounted connection between the columns. This solution makes the lift suitable for workshops with limited ceiling height. The overall height of the unit is 2,830 mm, the total width is 3,310 mm, and the clear distance between the columns is 2,820 mm. A minimum lifting height of 110 mm also makes it easier to service vehicles with low ground clearance. The lift is equipped with an electrohydraulic drive system powered by a 2.2 kW motor and a 380–400 V power supply. The automatic electromagnetic Solenoid Lock safety system allows the locking mechanisms to be released conveniently from the control panel. A 24 V low-voltage control system, emergency stop button and aircraft-grade cable synchronisation ensure stable, even and safe lifting of the vehicle. Universal two-stage and three-stage lifting arms make it possible to adjust the support points to vehicles with different wheelbases and body lengths. Adjustable rubber lifting pads with a height of 80 mm protect the vehicle sills and make correct positioning easier. Self-lubricating UHMW sliders and reinforced C-shaped arm holders increase the durability of the structure, ensure smooth operation and allow the lift to withstand intensive daily use. The Digima TW240E is a solid, functional and easy-to-operate lift for workshops that require a universal solution for servicing different types of vehicles. Its high lifting capacity, automatic safety systems, strong construction and CE certification make it a safe and durable addition to a professional workshop.

Condition: good (used), Heiber Schröder CE 1000-2 Tray forming machine Two-lane machine, manufactured by Heiber & Schröder, Germany. Manufactured in 2011. Description: Iedpfszlad Djx Ahzoaw The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE film on the inside), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a Nordson hot and cold glue system.