Used Lisec 2000-40/T2 for sale (28,943)

Condition: good (used), Version incl. key switch Application: Lisec machines Kdsdpfxjzb Enhj Anwjn Width: 425 mm Height: 30 mm Depth: 160 mm Weight: 1096 g Condition: good, second-hand

Condition: good (used), Version with key switch Area of application: Lisec machines Width: 425 mm Height: 160 mm Depth: 50 mm Weight: 1078 g Condition: Good, second-hand Ksdoyr Inlopfx Anwedn

Condition: ready for operation (used), Year of construction: 2010, operating panel for Lisec machines Kedpfx Aol Dwrpsnwodn

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Kdsdpfszdf Sxjx Anwon Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Power supply: 24 VDC Application: Lisec machines (AKL) Kdjdpfx Anozcvd Njwsn Width: 425 mm Height: 160 mm Depth: approx. 30 mm Weight: 1402 g Condition: good, second-hand

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total length: 43,000 mm, total width: 4,000 mm, total height: 2,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec insulating glass line 4500 x 2000 mm, year 1989/2007, consisting of following machines: - AKL-20V, edge grinding machine - RTVN-27/20WE, washing machine inlet conveyor - RTL-20B, washing machine with 6 brushes for low-e, including a sand filter and a hot water tank as well as a blower - RSV-38/20, frame set section - PSL-35/20V, assembling station - RTVN-16/20MZU2, measuring section for gas filling press - FPS-35/20U2B, gas filling press for Argon, can do assembling of 4,5 m long units, gas filling up to 3500 mm length - RTVN-11/20, outlet conveyor of gas filling press - UKL-35/23VA, tilt table for line discharge of 90° - KFL-35/22, horizontal glass conveyor Ksdpfjza Hcksx Anwjdn - RTVN-16/20VFE, short inlet of sealing robot, including measuring device for glass and frame - VL-1N/20, sealing robot, including option for triple units - DOS-1PU, dosing and metering station, modified to PS - VLA-25/20, extension of sealing robot The machine is in very good condition and will be available by the end of June 2026.

Condition: good (used), Year of construction: 1986, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform Kedjw Hyfmepfx Anwjdn -Scissor lift table: with weighing unit and trolley, each without control, and weighing display -Load capacity: 2000 kg -Platform: 4000 x 1420 mm -Dimensions retracted: height 430/675 mm -Extended dimensions: height 1145/1390 mm -Rolling chassis: roller spacing for rail 1100 mm -Transport dimensions: 1420/4000/H675 mm -Weight: 2600 kg

Year of construction: 2000, condition: used, Year of manufacture: Feb 2000 New: No Kedpfx Asrllzksnwsdn No guarantee. Please contact us if you can't find what you are looking for

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 810 mm, number of axes: 8, This 8-axis MORI SEIKI NZ-2000/T2/Y2 was manufactured in 2008. It features a twin-spindle design with a maximum Z-axis travel of 810 mm and X-axis travel of 210 mm. The machine is equipped with two turrets, each with 16 stations, suitable for complex multi-process turning and milling operations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-2000/T2/Y2 turn-mill centre we have for sale. Contact us for further details. • Control/NC • Control unit: MORI SEIKI MSX-701 • NC system: FANUC FS-31iA (MAPPS 3); MAPPS version: 3 • Software/features: Load monitor; Tool life management; Number of stored programs: 250; User memory: 50 MB; Tool offset pairs: 99; Custom macro variables: 600 • Languages: NC and MAPPS screens in Italian • Electricals/destination • Voltage: 380–480 V; Frequency: 50 Hz; Destination: Europe • Machine configuration Kjdszbkh Tjpfx Anwsdn • Bed length: 800 mm • C-axis on both spindles • 2 turrets with X-Y-Z axes • Both turrets originally equipped with live tooling • Lower turret live tooling currently NOT working (turning functions OK) • Suitable for complex multi-process turning and milling • Spindles • Main spindle (Spindle 1) • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Sub spindle (Spindle 2) • Power: 25/22 kW; Speed: 5,000 rpm • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Axis travels • B: 810 mm • Max. distance between spindle noses: 1,130 mm • Turrets • Turret 1: Axes X-Y-Z; 16 stations; Milling function included; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Turret 2: Axes X-Y-Z; 16 stations; Milling function present but NOT working; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Backward tool max lengths: 155 mm (upper turret), 100 mm (lower turret) • Tool presetting • Spindle 1 in-machine tool presetter: Manual (detachable) • Spindle 2 in-machine tool presetter: Manual (detachable) • Coolant/chip (machine-integrated) • High-pressure coolant system: 635 W / 1040 W • Coolant type: Water-soluble • Through-spindle air blow: Included • Chip disposal direction: Right • Interfaces • Bar feeder interface: Included (Multiple-bar feeder specification; LNS) • Robot interface: Included • Languages/documentation • Manuals: Italian • Documentation: Installation, Operation, Maintenance manuals; Declaration of Conformity; CE Certificate • Important note • Lower turret motorized tooling function faulty on both machines. T2 turret currently usable only for turning operations. Additional equipment • Automation/handling • RR Robotica loading portal (included) • Loading pallets (included) • Work loader (Spindle 2 side) • Workpiece ejector • Work unloading conveyor • Part receiver • Custom upper door hatch for portal loading/unloading (non-original) • Chip/coolant peripherals • Drag-type chip conveyor • Coolant tank with washing pumps • Additional non-original 20 bar high-pressure pump • Workholding and tooling • Main spindle and sub spindle chucks included (KITAGAWA 8" hollow) • Fixed tool holders: 8 total (4 upper + 4 lower) • Driven tool holders: 2 axial, 2 radial • Electrical/other • External machine transformer • Signal light tower: 3-tier (red / milky white / green)

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) - Effective bending length: 500 mm Kedpfx Aexdr Sksnwjdn - Minimum bendable diameter: 40 mm - Automatic cycle management - Pedal operation - Digital position display Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,155 mm, total height: 2,000 mm, total width: 1,469 mm, overall weight: 3,300 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, HYDRAULIC CNC SERVO PRESS BRAKE MTP 40×2000 MTP-3212 The MTP 40×2000 Hydraulic CNC Servo Press Brake is a modern machine designed for precise sheet metal bending in manufacturing plants, workshops, and metalworking companies. Thanks to its CNC controller and high-quality components, it provides accuracy, repeatability, and operator comfort. Kjdpfx Aeyttfronwsdn MAIN ADVANTAGES • 40-ton pressing force • 2000 mm bending length • MTP-3212 CNC controller • Servo-driven X and Y axes • AMADA-type tooling system • Rexroth, Schneider and Omron components • High bending accuracy • CE certification MTP-3212 CNC CONTROLLER The modern CNC controller features a color touchscreen for fast and intuitive programming. The software automatically calculates bending parameters and allows storage of up to 40 punch types. EQUIPMENT • Upper punch • Lower die • 2 front support arms • X-axis – servo drive • Y-axis – servo drive • R-axis – manual adjustment • AMADA-type quick clamping system COMPONENTS The machine is equipped with Rexroth hydraulic valves, Schneider Electric electrical components, and Omron safety devices. Steel hydraulic connections increase system durability and reduce the risk of leaks. SAFETY • Safety light curtain • Side safety guards • Rear safety fence • Emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL DATA Pressing force: 40 T Bending length: 2000 mm Maximum sheet thickness: up to 3 mm Distance between side frames: 1600 mm Throat depth: 200 mm Stroke: 100 mm Open height: 300 mm Back gauge travel: 600 mm Motor power: 4 kW Weight: 2950 kg Dimensions: 2200 × 1200 × 1850 mm APPLICATIONS The machine is suitable for the production of metal enclosures, electrical cabinets, ventilation components, steel structures, bent profiles, and custom-made sheet metal parts. DELIVERY AND SUPPORT We organize machine transport throughout Europe. We provide technical support, assistance with machine and tooling selection, and access to spare parts and service. Contact us for more information and discover our complete range of metalworking machinery available on our website.

Condition: good (used), Year of construction: 2010, functionality: fully functional, 2-axis: Programmable X, R axis Kdodpfxsya Dggj Anwon Bending length: 2100 mm Max. force: 40 t Max. opening between beams: 615 mm Max. stroke: 200 mm Approach speed: 140 mm/s Working speed: 0 – 10 mm/s Stroke speed: 140 mm/s Dwell: 6 mm Dimensions (LxWxH): 2900 x 1900 x 3050 mm Weight: approx. 5200 kg The machine can be inspected under power at any time.

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 Kedpfjyg Hhmex Anwjdn - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 Ksdoup T Uqspfx Anwedn measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 1998, operating hours: 94,737 h, clamping force: 2,000 kN, screw diameter: 60 mm, injection pressure: 1,440 bar, injection weight: 427 g, Arburg 470C-2000-675 (Nr. 40) without picker Kdjdpfx Anjvt Tb Aewon Year of production: 1998 TECHNICAL DATA Screw Dia [mm]: 60 Shot Weight [g]: 427 Injection Pressure [bar]: 1440 Clamping Force [kN]: 2000 Tie Bar Distance [mm]: 470x470 Platen Size [mm]: 715x715 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: Polish, German OTHER Power [kW]: 45,8 Workinghours [h]: 94737 Weight [kg]: 6630 EUROMAP

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: Kdodpey Sv Sgefx Anwsn - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) – RSVN-38/25A, frame set section, year 2001 – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm Kdsdpfx Aoy R Ergsnwsn • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation • Removal of adhesives and resins • Renovation of industrial surfaces Condition: used, fully complete. The machine shows normal signs of wear consistent with use.

Condition: used, axle configuration: 3 axles, first registration: 07/2015, color: other, Year of construction: 2015, Empty weight: 4.930 kg Axle 1: left 10 mm right 10 mm Kdsdpfxjy S T I Es Anwsn Axle 2: left 10 mm right 10 mm Axle 3: left10 mm right 10 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 03/2005, color: other, Year of construction: 2005, Empty weight: 4.900 kg Axle 1: left 10 mm right 6 mm Axle 2: left 10 mm right 6 mm Ksdpfsxbhb Aox Anwodn Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 08/2007, color: other, Year of construction: 2007, Empty weight: 5.500 kg Axle 1: left 4 mm right 4 mm Axle 2: left 6 mm right 6 mm Axle 3: left 4 mm right 4 mm We have the possibility to stack trailers! Ksdpfjza T Uyex Anwjdn

Condition: used, axle configuration: 3 axles, first registration: 07/2015, color: other, Year of construction: 2015, Empty weight: 4.930 kg Axle 1: left 10 mm right 10 mm Axle 2 left 8 mm right 8 mm Ksdpfx Aneza Sz Sowsdn Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, Stock number: 503618 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of manufacture: 2020 Operating hours: 8344 h Technical data, clamping unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum platen distance: 900 mm Opening stroke: 500 mm Rotary table size D: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical data, injection unit Screw diameter: 50 mm Injection volume: 392 ccm Injection pressure: 2000 bar Kdjdpfx Ajzfkflenwjn Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 N Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions L x W x H: 4.11m x 2.65m x 4.81m Total weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 Handling interface EUROMAP 73 interface OPC interface

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Kjdpfx Aszdb Trsnwedn Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 12/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), mileage: 888,809 km, power: 169 kW (229.78 HP), first registration: 06/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 9,800 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,660 mm, loading space width: 2,540 mm, loading space height: 2,620 mm, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, cruise control, power mirror, spoiler, tail-lift, = Additional options and accessories = - Air-suspended seats - Central lubrication - Radio/CD player - Roof Spoiler - Sun visor - Tailgate = More information = General information Number of doors: 2 Cab: single Registration number: 08-BBX-6 Technical information Number of cylinders: 5 Engine capacity: 9.291 cc Max. front axle load: 7500 kg Max. rear axle load: 11500 kg Weights Empty weight: 9.680 kg Carrying capacity: 9.420 kg GVW: 19.000 kg Max. towing weight: 30.000 kg Functional Tail lift: dhollandia DHLM 20, tail lift, 2000 kg Maintenance, history and condition APK (MOT): tested until 09/2026 Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Kdedjzc Elcepfx Anwon If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), TASKI Swingobot 2000 autonomous scrubber dryer Manufacturer: TASKI / Diversey Model: Swingobot 2000 Type: COR2000 Machine type: Autonomous scrubber dryer Condition: used, fully operational Operating hours: approx. 38 hours Serial number: 7524396000434 Operating voltage: 24 V DC Power consumption: 1500 W Weight: 471 kg Working width: 700 mm Suction nozzle width: 900 mm Fresh water tank: 90 l Operating time: up to 4 hours Theoretical area performance: up to 1,260 m²/h Protection class: IPX3 Operation: autonomous or manual Navigation system: LIDAR and sensor system Touchscreen control panel Emergency stop switch Kodpfjzd Eyusx Anwsdn Location: Teningen-Nimburg