Used Lns Mist Extractor for sale (1,503)

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Rodsyuf S Hspfx Ammju Edge extraction with fan Air supply unit 3102 WW, output 75 kW Air volume 10,500/5,250 m³/h Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system

Condition: new, - Mobile design - high degree of separation, high extraction performance Rodpfx Asu T Hrpemmsu - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: used, Year of construction: 2023, New demonstration machine! List price: €4,463 net. Robust construction made of galvanized sheet steel. Work area with a special pleated cardboard filter, an additional after-filter, and a filter cassette for extraction in the lower area. All filters are easily and quickly replaceable. Internal radial fan, in explosion-proof design, is equipped with an impeller made of sheet steel. The explosion-proof drive motor (EEx nA II) is located outside the airflow and drives the fan directly. A power supply cable with a length of 10 m, as well as a plug-in circuit breaker combination with a built-in on/off switch, are included in the scope of delivery. Caution! The switch is not explosion-proof and is only intended for use outside potentially explosive areas. The fan pressure connection is located on the top. The air outlet is vertical. The paint mist extraction wall complies with the latest regulations. The paint mist extraction wall is designed for installation in Zone 2 painting areas, with the average calculated concentration of flammable solvents limited to < 25% of the lower explosion limit. Technical data: Airflow, max.: 3500 m3/h. Exhaust outlet: 300 mm. Working area: 2000 x 1000 mm. Space requirement: 2600 x 920 x 1420 mm (H). Motor: 1.50 kW, EEx nA II T3, IP 55, 1500 min-1, B5, 400 V, 50 Hz. ATEX marking: Ex II 3 G. Sound pressure level: 75 dB(A). Weight: 220 kg. Fan: left-hand. Pleated cardboard filter: 1000 x 2000 mm - 1 piece. Pleated cardboard filter 1000 mm (Art. No. 2072091295) - each as a 10 m pack, fire-retardant according to DIN 53438 F1/K1 - Cutting length = 25 pleats on 1000 mm. 2072090518 Filter cut for Paint-Star - 1 piece. 2072091473 Cassette filter for Paintstar - 1 piece. Redpfx Amey Ehlrsmou Location: Rieth.

Condition: good (used), Oil and coolant mist extractor and collector for lathe or CNC machining center, LNS brand, model WS2 1000/700. Airflow: 950 m3/h, motor power: 0.75 KW, voltage: 200-230V / three-phase (3PH) / 50-60 Hz, weight: 35 Kg, year of manufacture: 2019. Rsdpsy Tmb Uofx Ammeu

Condition: excellent (used), Dust and mist extractor IMAS Rjdpfx Ameyw Hrbjmju

Condition: used, Year of construction: 2011, functionality: fully functional, Dry extraction wall Spänex TAW kompakt 215 Paint mist extraction wall with dry separator Complete supply air system Hot water heating coil Spray booth control with touchscreen 2 x 2.0 kW drive power 6000 m³/h air volume flow Rodpoxltrusfx Ammsu Year of manufacture: 2011 From joinery closure / retirement, in VERY GOOD CONDITION From joinery workshop Includes all piping, explosion-protected lighting and documentation

Condition: excellent (used), Year of construction: 1997, Hurrican Dambauer complete paint spray booth system Rjdsy Sv Alepfx Ammsu

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Fan power: 2.2 kW Rodpfey R Aldex Ammeu Airflow: 2,800 m³/h Filtration area: Main filter – 21 m² HEPA filter – 40 m² The device is in excellent technical condition – like new. Stock number: 1134

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Rodpfxjyn Rkuj Ammeu Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min

Condition: excellent (used), functionality: fully functional, Olimpia SE3BSTD spray booth wall Length: 3000 mm Rjdpfjy Rmyxex Ammju 2x cardboard filter Pint stop filters Filtration capacity: approx. 11,000 m3/h Motor power: 2.2 kW CE mark Dimensions: 335x150x238 cm (H)

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel emergency stop button (STOP) filtration capacity 15,000 m3/h year of production 2022 Rsdpfx Amey Nikkjmeu CE marking

Condition: excellent (used), Servatechnik extraction Rjdpfx Asx Nbnnemmju

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Rodpsy Dpfwsfx Ammsu Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good

Condition: ready for operation (used), Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Dimensions: 1374 x 857 x 2283 mm Weight: 400 kg Airflow rate: 4000 m³/h Electrical power: 3.7 kW Max. 400 V; 50 Hz Rjdpfsy Ezbajx Ammju Total filter surface: 38.9 / 108 m²

Condition: used, Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Overall dimensions: Width: 857 mm Depth: 1319 mm Height: 2287 mm Weight: 400 kg Year of manufacture: 2020 Airflow rate: 4000 m³/h Electrical power: 400V; 3.7 kW Rodpfey Ezapex Ammou Total filter surface area: 38.9 / 108 m² Number of filter cartridges: 4 + 2 HEPA Filter types: FilterStufe2 L1020/300/2 – 4 pcs HEPA LH 1020/1 – 2 pcs

Condition: used, With bottom extraction attachment Extraction surface (W x H): 2400 x 1600 mm Airflow: 7000 m³/h Height: 2600 mm Depth: 800 mm Complete air supply system included (Wolf KG100 type) With drip tray Redpfsyxm Eksx Ammju Comes with control system

Condition: used, Year of construction: 1999, Paint booth extraction system Attention: The supply air unit does not have a heating coil, only a fresh and recirculated air damper. Self-dismantling Rodeyvkwfepfx Ammju Price: 3500.- Location: 1230 VIENNA

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available. Rodpoxxh Tasfx Ammeu

Condition: good (used), Year of construction: 2019, Mist extractor Rsdpfx Ajtu Uxremmou

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Air performance (m3/h): 5000 Rjdpfxeuyh R Aj Ammou Suction pipe diameter (mm): 350 Height (mm): 2600 Depth (mm): 600/800

Condition: excellent (used), AZZURRA CS4B Spray Booth Wall Rsdpfxsyh E Hns Ammsu Length: 4000 mm 2x cardboard filters Pint Stop filters Filtration capacity ~ 15,000 m3/h Motor power: 4.0 kW CE marking

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. Rsdsxnlwzepfx Ammju IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Filtration efficiency reaches 99.97% Model: DMC-D2 Rodpsxd Ry Hofx Ammou Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Redpsxz Achofx Ammeu Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: ready for operation (used), Dust and mist extractor DeWalt model DW60 Redpfsxdwn Dex Ammeu