Used Loewe B11 for sale (174)

Condition: used, Year of construction: 1970, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Lrsdpfoy Ty N Sjx Agret

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe, adjustable machine reamer -Diameter: Ø 26 mm -Recording: MK1 -Dimensions: Ø 26 x 290 mm Lsdpfsyz Np Dsx Agrort -Weight: 0.6 kg

Condition: good (used), centrifugal pump, water pump -Flow rate: 15 m³/h -Pumping height: 11 m -Motor power: 1.1 kW -Speed: 1420 rpm -Number: 2 pumps available Price: per piece -Dimensions: 380/270/H480 mm Lredpfxeb A Rqxj Agrot -Weight: 44 kg/piece

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set Lrodpfozd R Ecsx Agrst -Manufacturer: Loewe / FW, Adjustable machine reamers, 11 pieces -Diameter: Ø 35 to 65 mm -Recording: MK3/MK4 -Submission/Price: complete -Transport dimensions: 520/400/H80 mm -Weight: 27 kg

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Lrjdpfozrpu Sox Agrot Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: good (used), Year of construction: 2008, workpiece weight (max.): 5,000 kg, total width: 2,000 mm, total length: 3,500 mm, total height: 1,800 mm, Railway machine Hofmann - I-110K B11-VIS MACH-ID 9626 Make: Hofmann Type: I-110K B11-VIS Control: CEMB B11 Year: 2008 Balancing machine for wheel sets Work load up to 5000 Kg Kell B11 Vision CEMB controller Rail track gauge: 500-1435mm Max. wheel tread Ø: 1500mm Min. wheel tread Ø: 200mm Max. axle length wheel set:26450mm Lodsy Uvgcspfx Agrert Min. axle length wheel set:500mm Speeds / ranges: 2100Rpm Number of slides: 2 Length: 3500mm Width: 2000mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1986, Working width: 500mm, voltage/frequency: 380V/50Hz, total connected load: 18A. Inspection possible by prior arrangement. Lrjdpfoz A An Rsx Agrst

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,600 kg, Electropneumatically controlled, segmented pressure shoes with a 30 mm segment width ensure a consistent grinding pressure across the entire workpiece width and can be further adjusted via the touch panel control. For final finishing: Smartflex lamellar disc for cross-grain sanding and for grinding radii. Technical data: Working width: max. 230 mm Ljdpfx Aszxnatjgrsrt Workpiece thickness: 10 to 230 mm Year of manufacture: 2025 Weight: 1,600 kg 400 V, 50 Hz, 32 A, fuse rating 35 A Directly from the manufacturer, inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT.

Condition: used, Year of construction: 1995, Frame grinding machine LÖWER Type LZ 1 Working width 280 mm Working height 120 mm Arbor diameter 35 mm Lsdpfszynpksx Agrert Table length 1100 mm

Condition: used, Year of construction: 1999, Number of grinding stations: 1 Maximum workpiece cross-section: 390 x 390 mm Grinding belt dimensions: 400 x 1800 mm Length: 1150 mm Width: 1120 mm Weight: approx. 1020 kg Dust extraction connection diameter: 2 x 150 mm Roller conveyor: 3300 mm Location: Supplier Ledezxqflopfx Agrort

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 1,910 mm, total length: 4,400 mm, total width: 1,640 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Fine finishing and intermediate sanding of profiled individual parts in window construction, with automatic profile change in seconds. The soft-disc units create a homogeneous, matte surface and even out the growth rings, particularly effective with spruce. Brushing rollers work in a longitudinal direction, and four-sided units process rebates, overlaps, and profiles. The automatic immersion system prevents over-sanding of end-face edges. Technical specifications: Workpiece width: max. 180 mm (230 mm for folding) Workpiece thickness: 12 to 120 mm Year of manufacture: 2025 Weight: 1,700 kg 400 V, 50 Hz, 26 A, fuse rating 35 A Directly from the manufacturer; inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT. Lodpfxezv Rfgj Agrort

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Type: P90 The scope of delivery includes: 01x pallet racking beam, used Material color: sendzimir galvanized Box profile: 110 x 50 mm Beam type: SLB 110|15 Bracket: 5 HK Clear width: 2,900 mm Max. load per pair of beams 2,700 kg, with evenly distributed load 02x locking pin, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out Currently available from stock: 1560 pcs. Ljdpfx Agjtpf Igsrjrt Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 8101, Löwer Keyway Cutting and Slotting Machine Year of manufacture: 1992 40 mm spindle plus associated Leitz Fenstersatz IV68/56 40 mm bore Pick-up price – delivery possible upon request. Ledpfjzvhguox Agrort The sale is made excluding any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected.

Condition: used, Year of construction: 1998, - Belt width: 300 mm - Belt length: 1800 mm - Max. working height: 200 mm - Feed rate: 6 / 11 / 16 m/min Sanding machine Manufacturer: Löwer Type: DSM 3000 Year of manufacture: 1998 Dimensions, space requirements and weight Length: 2660 mm Width: 1020 mm Height: 1890 mm Space requirement: (for operation, tool changes, maintenance) Length: 2660 mm + 2 x workpiece length Width: 2100 mm Height: 2000 mm Weight: 1600 kg Technical data Belt width: 300 mm Belt length: 1800 mm Max. working height: 200 mm Sanding motor - Rated power: 2 x 7.5 kW Sanding motor - Rated current: 2 x 15.4 A Sanding motor - Speed: 2870 rpm Feed motor - Rated power: 0.25 / 0.55 / 1.0 kW Feed motor - Rated current: 1.0 / 1.9 / 2.6 A Feed motor - Speed: 700 / 950 / 1420 rpm Belt speed: 1300 m/min Feed rate: 6 / 11 / 16 m/min Brush motor - Rated power: 2 x 0.37 kW Brush motor - Rated current: 2.1 A Brush motor - Speed: 1405 rpm Brush length: 290 mm Brush diameter: 120 mm Height adjustment motor - Rated power: 0.37 kW Height adjustment motor - Rated current: 0.81 / 1.15 A Height adjustment motor - Speed: 600 / 2680 rpm Extraction Connection size: 2 x = 150 mm 2 x = 120 mm Airflow: 2515 m³/h Minimum air velocity at the machine connection: 20 m/s Negative pressure at the extraction port: 889 Pa Note: Lrodpfx Aszuzbijgrot The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2016, condition: ready for operation (used), Table dimensions X/Y/Z: approx. 1400mm/800mm, grinding wheel diameter: 150mm, spindle speed: 2000rpm, swivel range: 180°, machine dimensions X/Y/Z: approx. 1600mm/1300mm/1750mm, weight: approx. 400kg. An on-site inspection is possible. Ledsynluhepfx Agrort

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Ljdpfszr Hnpjx Agrsrt Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: good (used), Year of construction: 2010, machine/vehicle number: 11176, Offer 25439 Technical data: - Abrasive diameter: 150 mm - Swivel head – grinding unit pivotable and tiltable on articulated arm - Dust drawer - Disc speed infinitely adjustable - Table dimensions: 1400 x 980 mm - Table height approx.: 870 mm - Drive: 400 V / 0.75 kW - Pneumatic connection: 6 bar - Space requirement approx.: W 1700 x H 1700 x D 1300 mm Lrjdpsyapx Ujfx Agret - Weight approx.: 400 kg

Condition: used, functionality: unexamined, Rated voltage 380V, 15A Grinding motor 5.5 kW Feed motor 0.37 kW Grinding belt width 200 mm Grinding belt length 1800 mm Pneumatic connection 6 bar Feed speeds 6 / 11 / 16 m/min Electric table height adjustment Ljdpfoznv Uwjx Agrjrt Belt air blast Dust extraction connection 140 mm

Condition: excellent (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts Ljdpfx Agevu Hgborsrt over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2788, Cut-off saw, diameter 300 mm Milling spindle, diameter 40 mm Sliding table with Festo length stop Dust extraction port for saw, 120 mm Dust extraction port for milling machine, 140 mm Cable + plug, 16 amps Without operating tools Unfortunately, we cannot respond to inquiries that do not include complete contact information. Lrodpfoiau I Sex Agrot

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 950 kg, Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air-blast, frame support, chassis. Lsdpfx Aexq Ehxsgrjrt

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, frame sanding device, Ledpfx Agsu R Tbhorort feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, weight: 550 kg

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 Ljdpfx Agjvnv Tqjrert ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) Ljdpfxex A Unxe Agrsrt - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Lrjdpfx Aoxbd U Eogrot