Used Log Ladder for sale (2,410)

Condition: used, functionality: fully functional, BARTON log ladder - 4 steps - Width: 120 cm - Height: 250 cm Fgsdpfxowi I Iho Ad Njb

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis. Fsdpfx Aoy I Nugjd Negb

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Fgedpjxz R Niefx Ad Njb Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: like new (used), ECO LOG harvester, year of manufacture 2021, 1,100 operating hours, like new. Fgedpsxvlkwofx Ad Neb

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m Fgsdpfju Smq Sjx Ad Njb - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: good (used), Year of construction: 2009, RAMON AS75 bowl cutter. Capacity: 75 liters Material: Stainless steel AISI 304 6 knives. Fodpfsy Rl Axjx Ad Nogb Knife speed: Standard model: 1500 / 3000 rpm VAR model: stepless from 1000–3000 rpm Bowl speed: 12 / 24 rpm Power: Standard: approx. 17 kW Current: 35A Weight: approx. 865–890 kg

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2015, Year of construction: 2015, Equipment: ABS, Equipment: Air suspension Fgjdpoy N Rrcofx Ad Nsb Safety: ABS

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2013, next inspection (TÜV): 10/2026, Year of construction: 2013, Equipment: ABS, Equipment: Air suspension Safety: ABS Fedpfx Aoy Numksd Negb * EBS

Condition: excellent (used), operating hours: 20 h, CATALOG NUMBER 7874 – Manufactured in Poland - Excellent condition – only 20 operating hours – Original documentation DTR + CE – Additional knives included – Additional bushings included: 18mm, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29mm - Knife setting tool included - Used machine, original paint (not repainted) Technical specifications: Fsdpfx Asy Nztksd Nogb - Diameter of produced dowels: 180–300mm - Max. diameter of raw wood before processing: 380mm - Max. allowance for machining: 40mm per side - Min. input material length: 1100mm - Knife head drive motor: 55kW - Stepless feed speed adjustment + forward/reverse: 1.5–8 m/min - Feed motor: 7.5kW Configuration: - 8 toothed infeed driven rollers - 4-knife cutter head - 6 smooth outfeed driven rollers - 7 pneumatic hold-downs - Additional bushings included - Additional knives included - Operating pressure: 6 bar - Electric cabinet dimensions (LxWxH): 900x400x1600mm - Machine dimensions (LxWxH): 4100x1650x2300mm - Weight: ~4000kg Net price: 199,900 PLN Net price: 47,600 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2026, New tree shear by Westtech, model CL260 Riskzone 50 m – quick-coupler system Pladdet CW10 – Woodcracker – = Further information = Year of manufacture: 2026 Intended use: Forestry Please contact Miguel Cubas for more information. Fgodpeygugqsfx Ad Neb = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Catalogue number 7979 TECHNICAL DATA - Max. diameter of processed dowels: 130mm - Installed bushing: 57mm - Min. input material length: 800mm - Knife head drive motor: 18.5kW - 4 feed speeds + forward/reverse - Feed motor: 2.2kW In order: - Infeed traction rolls, toothed: 6 pcs - 3-knife head - Outfeed traction rolls, smooth: 6 pcs Fgsdpfx Ajy Nkliod Njb - Extraction port diameter: 140mm - Additional bushings included: 40, 45, 50, 75mm - Dimensions (L/W/H): 3100x1300x1400mm - Weight: 2100kg ADVANTAGES – Polish manufacture – 3-knife head – Additional bushings included: 40, 45, 50, 75mm – Used dowel rounding machine, very good condition Net price: 31,900 PLN Net price: 7,590 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change with higher fluctuations)

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical data: - Log house milling machine BL100A - four-head unit - For producing chalet corner joints by milling on four sides of the log plank in a single clamping, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle, digital counter - Workpiece clamping device: 2 × vertical, pneumatic - Extraction: underfloor funnel, Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine base: prepared for end groove unit, drilling device, and cross-cut saw - Machine enclosure: closed design, hinged safety cover (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable sleeve - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 units - Activation: pneumatic, front-mounted - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutters - Horizontal drilling device integrated, with drill guide and chip guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatically, steplessly adjustable, with rapid traverse for idle stroke - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table cross-cut circular saw integrated (automatic mode only) - Maximum cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: suction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics, and electrics for end groove mill Fedpfsyxyanjx Ad Nogb - Interface: electric, for actuation via external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards Fgodow Rg Emepfx Ad Njb - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: used, maximum load weight: 14,225 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 6,611 mm, loading space height: 4,000 mm, total width: 8,511 mm, total height: 2,550 mm, Equipment: ABS, DOLL - 2-axle short timber trailer in "stool design" type A2G-10L500 (A131) Technical data: Dimensions: Total trailer length: 8,511 mm (with drawbar length 1,900 mm) Loading length: 6,611 mm Front overhang: 760 mm Rear overhang: 856 mm Vehicle width: 2,550 mm Wheelbase: 4,995 mm Load height top edge of frame loaded: 1,187 mm (with 275/70 R 22.5 tires) Overall height: max. 4,000 mm Weights: Perm. total weight: 18,000 kg Axle load (2 x 9t): 18,000 kg (techn. 24,000 kg) Unladen weight approx.: 3,350 kg (without stools and stanchions) Payload approx.: 14,650 kg Basic equipment:A2G DOLL - 2-axle short timber trailer in "stool design" - straight top chord Sturdy welded construction consisting of 2 longitudinal beams with straight upper chord. - Bogie with ball bearing rim - 1 wheel chock with bracket - Side underrun protection in accordance with ECE?R 737254461 Rear underrun protection: Aluminum underride guard, in accordance with ECE?R 58 Complete lighting and license plate holder installed in a protected manner, in accordance with ECE?R 487227407 Wheel cover: Complete plastic mudguards over the wheels, attached to the bogie at the front and to the main frame at the rear, Fgjdey Ifyfspfx Ad Njb with DOLL mud flaps behind the axles. Frame cover: Full-length aluminum duet plate cover (3/5 mm) bolted between the upper chords.7206867 Drawbar GZY27: Drawbar fork with silent bushing bearings and drawbar support, type GZY 27drawbar eye: Length: D-value: Maximum front axle load: Maximum total weight:Ø 50 mm (heavy-duty ECE) 1,900 mm 125 kN 10 t 27 t Connecting cable to the truck: routed along the drawbar (air, light, ABS). Cable routing: Brake and electrical cables routed protected on the main frame. Grapple bracket: Angled grapple bracket at the front, reinforced. Mud flap: Continuous mud flap at the end of the vehicle, swinging, with ?DOLL? log Chassis / Chassis:12 t Chassis: 2 single axles, BPW, 12 t with drum brakes, both axles with ABS and AGS, including safety ropes. Suspension type SL, with 2 x 43 mm trailing arms. Air suspension: Air suspension without lifting and lowering. Weight display without Smartboard: EBS-E weight display for trailers with air suspension, consisting of 2 pressure sensors to determine the axle loads. The axle loads are transmitted to the truck via CAN-BUS for weight display in the truck display. (Truck equipment not included in the scope of delivery!) Brake system: Electronically controlled 2-line air brake system (EBS-E). Brand name, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, can be operated via parking release safety valve, as well as from the cab (truck-side installation not included in scope of delivery!) Aluminum air tank Brake connection: 1 duomatic clutch head. Tires: Tires (85.50 kg / piece): 8 pieces tires 275/70 R 22.5 make Continental Hybrid HS3 on steel rim 8.25 x 22.5. Stools / stanchions: Stool: 6 pieces ECCO? steel stool body with 2° stanchion inclination type Kombi 7 (80.0 kg), with bracket ? Clamp fastening on the main frame including 1 pair of hooks for load securing. Stanchions: ECCO aluminum stanchions type ALU 7, screwable, fixed dimension stanchions. Basic height 2,550 mm (21.0 kg). Maximum loading capacity per pair of stanchions 7t. Electrical equipment / lighting: Lighting system: Conventional wiring of the trailer to increase the quality standard. ? Long service life ? Insensitive to moisture and dirt ? Minimal maintenance ? Quick and easy repair in rare serv

Condition: used, Technical data: Max. dimension of glued component: 4000x1060 mm Fjdpfey N Ta Ajx Ad Nogb Vertical clamps: 8 pcs Hydraulic clamps Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 4250 mm Width: 1350 mm Height: 2600 mm

Condition: used, maximum load weight: 14,650 kg, overall weight: 18,000 kg, first registration: 01/2014, Year of construction: 2014, Internal vehicle no.: G180187 German vehicle For more INFO, contact: Luis Lucena (German, English, Spanish, French) Fedpfex Dgdusx Ad Nogb Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors excepted. We are happy to accept your used vehicle as part of payment. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 06/2022, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: other, tire size: 435/50R19,5 160J, color: other, gearing type: other, front tire size: 435/50R19,5 160J, rear tire size: 435/50R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 4 x wooden stanchions, 600 mm side walls, +500 mm extension side walls, lashing eyes, Surcharge for ramps: €800, -- Printing errors, mistakes, and changes reserved, sample images --, More data at: !, More Details: ! Fgedsy Igwfjpfx Ad Neb

Condition: reconditioned (used), Debarker for logs from 130 to 700 mm in diameter. Fgodewfz Iyspfx Ad Njb

Condition: good (used), functionality: fully functional, machine/vehicle number: W09M2K220M0D46095, mileage: 188,727 km, power: 405 kW (550.65 HP), first registration: 07/2021, fuel type: diesel, empty load weight: 15,700 kg, maximum load weight: 10,300 kg, overall weight: 26,000 kg, tire size: 385/65 + 315/80 R 22.5, axle configuration: 6x4, next inspection (TÜV): 08/2026, fuel: diesel, fuel tank capacity: 600 l, brakes: retarder, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Year of construction: 2021, Equipment: ABS, AdBlue, EBS, additional headlights, air conditioning, cable winch, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, hill-start assist, onboard computer, parking heater, retarder, seat heater, second fuel tank, soot filter, tachograph, traction control, our vehicle number #30765 Globetrotter FH with 1 bunk Euro VI 550 HP 6x4 Retarder BBB Tire size A1 385/65 R 22.5, A2 + A3 315/80 R 22.5 Tank capacity 300 liters Additional tank 300 liters Color: black Perm. total weight 26,000 kg Payload 10,300 kg Unladen weight 15,700 kg Differential lock I-Shift gearbox Air conditioning Low noise Loading crane Epsilon 270L with 3,926 h PTO (power take-off) Disc brakes Auxiliary heater Cruise control Traction control Hydraulic outriggers, double High seat Rotator with timber grab Hill start assist 2 x electric windows On-board computer Electric/heated exterior mirrors Multifunction leather steering wheel Refrigerator Volvo High Audio System ACC adaptive cruise control AEBS emergency braking assistant Rear air suspension for driver's cab Integrated cabinet DPF (diesel particulate filter) Central locking with remote control Electric sun blind Fgjdpfsy H Df Dox Ad Njb Roller blind left Including Doll Kompakt II long timber trailer First registration 07/2021 2x BPW HD axles Tire size 315/80 R 22.5 Color: black Disc brakes Hydraulically extendable stanchions A1 forced steering Winch 2x reversing lights Central lubrication system Twin tires Drum brakes ABS EBS Financing available on request!!!

Condition: used, maximum load weight: 14,570 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2021, next inspection (TÜV): 04/2027, loading space length: 6,700 mm, Year of construction: 2021, Equipment: ABS, PAVIC Type HTA 20 2-axle timber rail trailer with platform loading area in bolster design, 4x OptiPa SL steel bolsters with 8 pcs. aluminum stakes, 3 pairs of OptiPa buffer blocks, usable loading length approx. 6700 mm, Y-drawbar approx. 1900 mm long, front retaining cable, various lashing points on the chassis, side underrun protection left and right, SAF Off-Road axles 2x 10,000 kg air-suspended, ABS, disc brakes with EBS, WABCO braking system with WABCO control box "SmartBoard" for air suspension, load pressure gauge, odometer, etc., LED perimeter lighting and LED taillights, tires 275/70 R 22.5 // 8x on ALCOA Dura-Bright high-gloss polished aluminium rims, technically possible gross weight 22,000 kg, unladen weight 3,430 kg, first owner, German vehicle, very good overall condition! Not a rental vehicle! Sale to businesses only! All information without guarantee! Subject to errors and prior sale! Fedjy Hgdijpfx Ad Njgb

Condition: used, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 04/2015, loading space length: 7,500 mm, Year of construction: 2015, Equipment: ABS, Manufacturer Menke-Janzen Model 24 t. 3 axle Woodtransport / Holztransport Year 2015 Condition Good Fgodpfxexiucvs Ad Njb Serial Number W09W01327FWJ16483 Ref. nr. 7984 1 reg. Disc brake: ? ABS: ? Axles: ROR Suspension: Air Tire Size: 275/70R22,5 Tire % back 50 - 70 - 70% Toolbox: ? Total weight: 24000 kg. Weight: 6140 kg. Load capacity 17860 kg. Inner length: 7600 mm.

Condition: used, mileage: 605,800 km, power: 375 kW (509.86 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, DAF XF 510 6X4 timber transporter Fedey Ikfmopfx Ad Njgb Crane: Palfinger Epsilon M13Z HPLS SuperSpaceCab cab, retarder, air conditioning, cool box, external sun visor, trailer coupling, warning beacons, alloy wheels, radio CD with navigation system, 2 beds, adaptive cruise control, differential locks, multifunction steering wheel, EURO 6, central locking with remote control, ABS. Payload: 10,100 kg Unladen weight: 15,900 kg

Condition: like new (used), Log circular saw, for diameter until 1100mm Fgsdpfx Adji Ek Hpo Neb

Condition: excellent (used), Catalogue number 7977 TECHNICAL DATA - Range of processed dowel diameters: 40-140mm Fjdpfsy Iffbex Ad Njgb - Max diameter of input material: 240mm - Min length of input material: 600mm - Max stock removal per side: 30mm - Installed bushing diameter: 100mm - Cutter head drive motor: 18.5kW - Stepless feed speed adjustment + forward/reverse - Feed motor: 1.5kW In sequence: - infeed trough - 6 toothed feed rollers - 4-knife head - 6 smooth outfeed feed rollers - extraction port diameter: 220mm - dimensions L/W/H: 2660x1350x1400mm - weight: 1650kg ADVANTAGES – Polish production – DTR documentation – Used dowel lathe, in very good condition Net price: 49,900 PLN Net price: 11,880 EUR (at 4.2 EUR rate) (Prices may change subject to exchange rate fluctuations)

Condition: excellent (used), length 12 meters / width on customer's request. Also we can make different lengths and there are option with 2 or chains. Fsdpsii Anhofx Ad Nogb