Used Macpresse 112 for sale (1,033)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational Kledpfxezbxwij Anwou • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Ksdpfoy S Rqwox Anwjlu Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: good (used), Professional three-phase electric motor from the renowned German manufacturer KAISER – Elektromotoren-Werke Kaiser. Robust industrial design intended for continuous duty in industrial machines, pumps, fans, machine tools, compressors, and technological drive systems. The motor features flange mounting and a shaft with a diameter of approximately 28 mm, with a keyway. Technical data: • Manufacturer: Elektromotoren-Werke Kaiser • Type: DN 112 S/2 • Power: 4.0 kW • Voltage: 380V • Current: 9.0 A • Frequency: 50 Hz • Speed: 2880 RPM • Three-phase motor • Shaft diameter: approx. 28 mm • Flange mounting • Durable industrial housing • Made in Germany Applications: • Pumps • Fans • Industrial machinery • Machine tools • Compressors • Technological drives • Production equipment Ksdpfx Aey Nm Tvjnwslu Condition: Used item. Shows normal signs of use and storage. Visual condition as shown in the photos.

Condition: used, mileage: 438,076 km, power: 235 kW (319.51 HP), first registration: 05/2006, fuel type: diesel, tire size: 13R22,5, axle configuration: 4x2, wheelbase: 5,200 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 8, emission class: euro3, suspension: steel, loading space length: 5,470 mm, loading space width: 2,410 mm, loading space height: 700 mm, Year of construction: 2006, Equipment: crane, electric window regulation, Drivetrain Drive: Wheel Axle configuration Tyre size: 13R22,5 Kodoyg Ehfopfx Anwslu Suspension: leaf suspension Rear axle: Double wheels Weights Empty weight: 10.560 kg Carrying capacity: 8.440 kg GVW: 19.000 kg Functional Mast: telescopic (2 parts) Make of bodywork: HIAB 122BS-2 DUO Tipper: Back = Additional options and accessories = - PTO - Tipper hydraulics

Condition: like new (used), Year of construction: 2020, operating hours: 4 h, Jungheinrich Reach Truck COMPACT AND MANEUVERABLE The Jungheinrich EJG, as a free-lifting reach truck, is used wherever reach trucks with radar support cannot be used (e.g., for lateral handling of pallets, special load handling equipment, use with racking systems with impact protection). With an overall width of only 910 mm and high maneuverability, the vehicle can also be used in narrow storage areas. Manufacturer: Jungheinrich Type: EJG 112 Year of manufacture: 2020 Drive type: Electric Load capacity: 1,200 kg Lifting height: 2,500 Load center: 500 mm Weight: 2,175 kg Basic dimensions: Overall height: 1,880 mm Fork length: 1,150 mm Performance data: Motor: 24 V electric Motor power: 1.6 kW Battery: 24 / 375 V/Ah Charger: 24 V Power transmission: Impulse control Steering: Reach steering Year of manufacture: 2020 Type: EJG 112 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone. Kledpszd Um Defx Anwou

Condition: used, machine/vehicle number: 13466, Year of construction: 2011, operating hours: 5,312 h, load capacity: 1,200 kg, lifting height: 2,900 mm, free lift: 1,540 mm, load center: 600 mm, construction height: 1,900 mm, fork length: 1,150 mm, overall weight: 807 kg, enginetype: Electric, manufacturer: Jungheinrich Klodpfx Aoxccp Dsnweu

Condition: good (used), mileage: 96,295 km, power: 84 kW (114.21 HP), fuel type: gasoline, gearing type: mechanical, axle configuration: 4x2, wheelbase: 2,690 mm, first registration: 04/2016, loading space length: 660 mm, loading space width: 1,160 mm, loading space height: 1,220 mm, emission class: euro6, color: grey, driver cabin: day cab, tire size: 195/65R15, number of seats: 5, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, traction control, = Further options and accessories = - Heated mirrors - Bluetooth - Electric windows - Electric mirrors - Halogen lamp - None - Manual - Fabric = Remarks = Configuration: 4x2, Unladen weight: 1,395 kg, Gross weight: 1,920 kg, Cab type: Double cab, Air conditioning, Number of airbags: 4, Rear wiper, Parking sensors: rear, Electric windows, Electric mirrors, Colour: grey, Metallic, Heated mirrors, Lighting: halogen lamp, Bluetooth, Engine power: 84 kW (113 Hp), Fuel: petrol, Euro: 6, Drive technology: timing chain, Transmission type: manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Roof rack: none, Side doors: 1, Side windows: 4, Rear closure: tail lift, Central locking, Seating capacity: 5, Seat configuration: 1+1+3, Upholstery: fabric, Manual seat adjustment, 112 Tourer petrol Euro 6 passenger bus double cab air conditioning PDC!, Spare wheel, Tyre type: summer tyres = Further information = General information Number of doors: 1 Registration number: KLEYN1 Transmission Transmission: 6-speed manual gearbox Axle configuration Tyre size: 195/65R15 Brakes: disc brakes Suspension: coil springs Axle 1: Tyre tread left: 4 mm; Tyre tread right: 4 mm Axle 2: Tyre tread left: 4 mm; Tyre tread right: 4 mm Kedpfxsyx Uhte Anwslu Dimensions Dimensions (L x W x H): 432 x 183 x 180 cm Weights Kerb weight: 1,395 kg Payload: 525 kg GVW: 1,920 kg Functional Load floor height: 54 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Klodpfew Tfw Hox Anwju Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: used, mileage: 214,535 km, power: 245 kW (333.11 HP), first registration: 04/1985, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: mechanical, Very well-maintained suction and jetting combination unit from the Swiss manufacturer Kaiser. - Scania 112 6x4, first registration: 02/1985, mileage: 214,000 km - Kaiser Kanal Jet Combi - Kaiser M13 vacuum pump - KDU 300 high-pressure pump - Partition wall - Kaiser suction boom - Hose reel 120 m, 1" - Manual hose reel Financing options available through our partner banks. We are happy to assist you further. Please note: We expressly reserve the right to prior sale, as this item is also advertised on other platforms. Accessory details provided without guarantee. Subject to change, prior sale, or errors. We explicitly recommend and encourage inspection and testing so that the buyer has a clear understanding of the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired. Ksdpow Ik Dusfx Anwolu

Condition: ready for operation (used), Franz Kessler DM 112 L/4 spindle motor SN: 123885, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kjdpfoudqrzjx Anwslu

Condition: ready for operation (used), Kessler MIF 112 L/S spindle motor with fan SN:112010 ,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Klodpfxjur Da Ns Anwju

Condition: new, Gantner ISM 112 Intelligent Sensor Module SN: 085055, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Klsdpfx Aey Np Ucsnwju

Condition: ready for operation (used), Heidenhain UEC 112 ID 1075826-01 Kjdpey Nq Nhjfx Anwslu The costs cover only the repair analysis of your component, which you can send to us. After inspection of your part, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. Your component will be fully overhauled during the repair process and will receive a 3-month warranty from us.

Condition: ready for operation (used), Heidenhain UEC 112 ID 625779-01 The costs only include the repair analysis of your component, which you can send to us. After evaluating your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis cost will be waived. As part of the repair, your component will be fully overhauled and will receive a 3-month warranty from us. Ksdpey Nq Nzsfx Anwslu

Condition: ready for operation (used), Heidenhain UEC 112 ID 625779-03 The costs include only the repair analysis of your component, which you can send to us. After the evaluation of your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair, your component will be completely overhauled and will come with a 3-month warranty from us. Klodpfx Ansy Nq N Uewju

Condition: ready for operation (used), Heidenhain UM 112 ID 325 001-02 SN13068381B, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kedpfxsx Er Uws Anwjlu

Condition: ready for operation (used), Heidenhain UM 112 ID 325001-02 The costs include only the repair analysis of your component, which you can send to us. After inspection of your component, you will receive a quotation with the actual repair costs. Upon receipt of your repair approval, the analysis costs will be waived. As part of the repair process, your component will undergo a complete overhaul and comes with a 3-month warranty from us. Kledpey Nq T Tjfx Anwsu

Condition: ready for operation (used), Heidenhain UEC 112 ID 1075826-02 The costs cover only the repair analysis of your component, which you can send to us. After our assessment of your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis fee will be waived. Your component will be completely overhauled during the repair process and comes with a 3-month warranty from us. Klsdpoy Nq Nnefx Anwju

Condition: ready for operation (used), Heidenhain UEC 112 ID 1081003-01 The costs only include the repair analysis of your component, which you can send to us. After inspection of your component, you will receive a quotation with the actual repair costs. Upon your approval for the repair, the analysis costs will be waived. Your component will be fully overhauled during the repair and will come with a 3-month warranty from us. Ksdpfx Aey Nq Nuenwslu

Condition: ready for operation (used), Heidenhain UEC 112 ID 625779-02 The costs only include the repair analysis of your component, which you can send to us. After inspecting your component, you will receive a quotation detailing the actual repair costs. Once you approve the repair, the analysis costs will be waived. As part of the repair process, your component will be completely overhauled and will include a 3-month warranty provided by us. Kodpfx Asy Nq N Isnwolu

Condition: ready for operation (used), Heidenhain UM 112 ID 325001-01. The costs cover only the repair analysis of your component, which you can send to us. After inspection of your component, you will receive a quotation with the actual repair costs. Upon your repair approval, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and will receive a 3-month warranty from us. Kjdpfxjy Nq T Hs Anwolu

Condition: ready for operation (used), Grundfos MG 112 MS 2-28 FT 136-C three-phase motor SN 1100029148, used, minor signs of wear, 100% functional, scope of delivery as per photos Kledeqyq Nqjpfx Anweu

Condition: ready for operation (used), Baumüller GNAF 112-LV direct current shunt motor without encoder, serial number as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photo. The agreed sales discounts do not apply to this item. Please request the price separately. ATTENTION: Please enquire separately about costs for packaging and shipping! ATTENTION: Please enquire for charges for packing and transport separately! Klsdpfxjwn R A Ee Anwju

Condition: new, Landert Motoren 112-28-MK-FAM2 Liquid cooled engine, SN:89289/002 ,unused, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ksdpfoi D I Emox Anwslu

Condition: ready for operation (used), Lehmann NC dividing head with PL gear 420-112 rotary table Serial number: A4199 Material number new: 829070AR1 / Material number old: WM780647B,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kledpfx Aet Sn Udsnwsu