Used Magnat-Physik Mf-Ri8 for sale (958)

Condition: new, Magnetizer Magnet Physics MF-RI8 Dcodoivdl Tepfx Agmok Item condition: New without OVP The item comes from a company liquidation from the automotive industry and was temporarily stored in paternosters. Storage traces possible. R12B1_EK Financing through our bank is also possible. komplett-konzept.leasingo.de Further magnetizing devices - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2016, condition: ready for operation (used), A continuous cooling tunnel MF-Hamburg is available. Cooling principle: radiation and convection cooling, working height: 920mm, belt width: 420mm, conveyor belt: PUM2 smooth belt, height adjustment: +/-15mm, infeed length: 2770mm, cooling length: 17000mm, overall length: 20250mm, overall width: 720mm, material: 1.4301. Documentation available. An on-site inspection is possible. Dcjdpfxezmymzj Agmek

Condition: used, Pore finder, pore finder, surface tester Dedpfxob Uhtqj Agmeck -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm -Weight: 7 kg

Condition: used, Pore finder, pore finder, surface tester -portable high-voltage pore detector -to locate: pores, cracks and other imperfections -Dimensions: 365/220/H260 mm Dcsdsb Riagjpfx Agmok -Weight: 7.5 kg

Year of construction: 2019, condition: new, We offer bending tools and punching tools for TRUMPF, AMADA, BYSTRONIC, LVD, SALVAGNINI, DURMA, ERMAKSAN, MVD, and HACO machines. Standard and custom tools. Please send us your requirements, and we will provide you with the appropriate tool. Dcodpod H T Tfjfx Agmek

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. Dsdpfjtw Szasx Agmsck And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: used, Year of construction: 1998, Spindle bore 56 mm (main spindle) Spindle speed (main) 31-6300 rpm Spindle speed (Sub) 5000 rpm Movements: Slide 1 - X/Z - 155/280 mm Slide 2 -X/Z - 82/130 mm Turret 1: 8 stations (4 rotating/live) - 120 rpm (C-axis) Turret 2: 8 stations Control: Siemens Sinumerik 840 C Equipped with: Djdpszr Dn Hofx Agmjck Chip conveyor 30 pcs. tool holders 8 rotating tool holders Magazine bar feeder model Simag 65.1 - 3200 mm

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Accerories Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor Parts catcher CNC turning center with 3 turrets with rotary tool drives and 2 spindles. There is an internal coolant system for the turrets with individual pumps Dodpfszd Tcwex Agmeck *

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 820 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total width: 2,160 mm, table width: 254 mm, table length: 1,370 mm, table load: 300 kg, overall weight: 1,260 kg, spindle speed (max.): 4,200 rpm, product length (max.): 2,400 mm, number of axes: 3, This 3-axis Optimum MF 4-B was manufactured in 2018. It features a maximum drilling capacity of 24 mm and a cutter head size of up to 76 mm. The machine includes a robust cross table size of 1370 x 254 mm and a maximum spindle speed of 4200 rpm. If you are looking to get high-quality milling capabilities, consider the Optimum MF 4-B milling and drilling machine we have for sale. Contact us for further details. Dcsdpjzq Dk Eefx Agmsk - Description: 3-axis manual conventional milling and drilling machine with sleeve feed, tiltable milling head, rotatable spindle head carrier and position indicator- Face Cutter Capacity: max. Ø 76 mm- End Mill Capacity: max. Ø 25 mm- Drilling Capacity (Steel S235JR): Ø 24 mm- Continuous Drilling Capacity (Steel S235JR): Ø 20 mm- Throat Depth: 0 - 420 mm- Quill / Sleeve Stroke: 127 mm- Spindle Taper: ISO 40 - DIN 2080- Spindle Speed: 60 - 4200 rpm (min-1)- Gear Steps: 2 / continuously variable in steps- Automatic Quill Feeds: 0.04 | 0.08 | 0.15 mm/rev- Motor Power: 2.2 kW | 400 V - 50 Hz- Milling Head Tilt (Front / Back): +/- 45 degrees- Milling Head Tilt (Left / Right): +/- 90 degrees (horizontal)- Ram Overarm Travel: 470 mm- Distance Spindle to Table: max. 405 mm- Table T-Slot Size / Pitch / Qty: 16 mm / 63 mm / 3- X-Axis Travel (Manual / Power Feed): 820 mm / 740 mm- Y-Axis Table Travel (Manual / Power Feed): 410 mm / 330 mm- Z-Axis Knee Travel (Manual / Power Feed): 400 mm / 320 mm- Main Motor Power: 2.2 kW (400 V / 3 Ph / 50 Hz)- Coolant Pump Power: 90 W- Included Accessories: Coolant system, chip tray, and operating tools Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, total height: 2,150 mm, total width: 1,450 mm, table width: 230 mm, table length: 1,244 mm, table load: 230 kg, overall weight: 950 kg, spindle speed (max.): 5,100 rpm, product length (max.): 1,400 mm, number of axes: 3, This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details. - Type: Manual multifunctional 3-axis drilling and milling machine- Digital Readout: DPA 21- Modifications / Upgrades: Drive Upgrade- Total Connected Load: Approx. 1.5 kW (may be higher due to modifications)- Electrical Voltage: 400 V- Phases: 3 Ph- Current Type: ~- Mains Frequency: 50 Hz- Cutter Head Size Max.: 76 mm- End Mill Size Max.: 18 mm- Vertical Spindle Throat/Reach: 233 - 533 mm- Vertical Spindle Tool Holder: ISO 40 DIN 2080- Vertical Spindle Speed Range: 10 - 5100 rpm- Vertical Spindle Number of Speed Ranges: 6- Vertical Spindle Speed Control: Electronically adjustable- Horizontal Milling Table Length: 1244 mm- Horizontal Milling Table Width: 230 mm- Distance Vertical Spindle to Horizontal Table Min.: 57 mm- Distance Vertical Spindle to Horizontal Table Max.: 463 mm- Horizontal Table T-Slot Size: 16 mm- Horizontal Table T-Slot Number: 3- Horizontal Table T-Slot Distance: 63 mm- Horizontal Table Max. Load Capacity: 230 kg- Number of Coolant Pumps: 800 mm automatic- Vertical Spindle Continuous Duty S1 Drive Motor Power: 1.5 kW- X-Axis Travel Automatic: 24 mm- Y-Axis Travel Automatic: 20 mm- Spindle Speeds: Stepless speed control- Drilling/Milling Head Inclination: Tiltable ± 45°- Reach / Throat: 215 - 533 mm MF 2Vario DPA- Drilling Depth Stop: Adjustable with millimeter scale, readable from the front- Protective Shield: Height-adjustable, large dimensions- X-Axis: Motorized table feed, stepless speed control, rapid traverse, right/left rotation, cross table Dcjdpezq A A Hefx Agmok

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Djdpfx Aewyup Togmock Height: 3400mm Weight: 6500kg

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 4,400 kg, lifting height: 8,800 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 9,530 kg, total length: 5,570 mm, drive type: Diesel, construction width: 2,400 mm, Rigid telescopic forklift Mast type: Telescopic Dcodpfxjzhypro Agmsk Technical condition: New Front tires size: 500/70 r 24 michelin xcml Rear tires size: 500/70 r 24 michelin xcml

Condition: used, Year of construction: 2021, operating hours: 1,120 h, power: 53 kW (72.06 HP), Equipment: all wheel drive, front linkage, * German-made machine, first owner, in very good condition * TABMC040VK5115005 * Full service history * Road approval, 40 km/h * 4x4 all-wheel drive * Year of manufacture: 2021 * Operating weight: 6,200 kg * Tires: 340/85 R24 (front), 420/85 R34 (rear), approximately 80% tread * * I would be happy to send you a video via WhatsApp Dodpey Ubgusfx Agmock * WhatsApp: * Polish contact: [Phone number] * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: N-0048182, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 350 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,200 mm, total height: 1,750 mm, overall weight: 750 kg, open-circuit voltage: 12 V, Dalex MF Resistance Welding Machine PMS 32-6 – Year of Manufacture 2016 – Excellent Condition For sale is a high-quality Dalex medium-frequency resistance welding machine, type PMS 32-6, in very good technical and visual condition. Technical data: Manufacturer: Dalex Type: PMS 32-6 Year of manufacture: 2016 Welding power: 250 kVA (medium frequency) Max. welding current: 50 kA Welding force: 215 ... 1290 daN Welding control: Harms & Wende with PQS (Process Quality System) User-friendly touch screen operation Integrated displacement measuring system for the welding cylinder for precise process monitoring The machine is ideally suited for demanding resistance welding tasks and, thanks to its modern medium-frequency technology, guarantees high process reliability, excellent welding quality, and energy-efficient operation. Condition: Dsdozpxr Ijpfx Agmeck The welding machine is in excellent condition, well-maintained, and ready for immediate use. Inspection and functional testing are possible by arrangement.

Condition: used, operating hours: 147 h, number of beds: 30, Operating hours: 147, first registration: 02/02/2026. First registration: 02/02/2026. Operating hours: approx. 150. Standard equipment/technical data: ENGINE. Maximum power: 132/180 kW/PS (ISO 14396). Maximum power with power management: 155/210 kW/PS. Maximum torque: 750 Nm, with power management: 860 Nm. Registered power: 148 kW (ISO 14396). Maximum power at the power take-off: 114/155 kW/PS (OECD). 6 cylinders, 6.6l AGCO Power - 66 AWF, CR, 4V. Exhaust aftertreatment with DOC - diesel oxidation catalyst, SCR 3rd generation & diesel particulate catalyst. Emission standard: Stage 5. Electronic engine control with Vistronic fan control. Engine speed memory. Powercore engine air filter with coarse dirt extraction. EasyCare cooler package. 305-liter fuel tank. Dcjdezpcu Hjpfx Agmsk

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Dcsdpfjzpcvdsx Agmek Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: used, Year of construction: 2023, operating hours: 197 h, maximum speed: 34 km/h, Operating hours: 197, first registration: 10/28/2025. Basic equipment / technical data: Engine: Diesel, 3-cylinder turbo engine, 1,825 ccm - 35 hp (ISO). Exhaust: front, left. Emission standard: Stage 5. Dry air filter. Air intake system under the hood. Fuel tank capacity: 36 liters. Transmission / PTO: Hydrostatic transmission, electronically controlled. 3 groups. Electro-hydraulic PTO clutch. Rear PTO: 540 / 540Eco rpm. Central PTO. Rear axle / brakes: Oil-cooled disc brakes in the rear axle. Parking brake. Mechanical differential lock in the rear. Lifting device / hydraulics: Three-point hydraulics with mechanical position control. 1,200 daN lifting force. Hydraulic pumps with 55.1 l/min, max. pressure 160 bar. Working circuit: 41.5 l/min. 2 control valves - single/double-acting. Joystick control for 2 additional central valves. Cat. 1 lower links with hitch and upper link with ball joints. Front axle: All-wheel drive - portal front axle. Mechanical engagement of the all-wheel drive. Hydrostatic steering (separate pump). Front weight carrier with towing hitch. Tires: Without tires, without front fender. Driver's cab: De-Luxe cab factory-mounted, fixed windshield. Heater and air conditioning. 2 work lights at the front on the cab roof. 2 doors. Analog-digital instrument panel. Tilting steering column. Seat with mechanical suspension. Special equipment: - air-suspended driver's seat - hydraulic couplings - tires 24x8.5-12 / 315x80D16 Golf - front fender - front hydraulics with lower link and 1 single-acting valve - rotating beacon. Price: 33,000.00 Euro net, storage location: 54595 Prüm. Dsdpfx Aoyt Aaxegmock

Condition: used, Year of construction: 2023, operating hours: 307 h, maximum speed: 50 km/h, front tire size: 540/65 R28 | 0%, rear tire size: 650/65 R38 | 0%, tire size: 650/65 R38, number of beds: 35, Tire size (front): 540/65 R28, Tire size (rear): 650/65 R38, Operating hours: 307, First registration: 19.12.2024_____First registration: 19.12.2024, Operating hours: approx. 350 h, Standard equipment/technical data: ENGINE, Maximum power 121/165 kW/hp (ISO 14396), Maximum power with power management 136/185 kW/hp, Maximum torque 790 Nm, with power management 800 Nm, Registered power 134 kW (ISO 14396), Maximum power at the PTO 103/140 kW/hp (OECD), 4 cylinders, 4.9l AGCO Power - 49 LFNT-D5, Exhaust aftertreatment with DOC - Diesel oxidation catalyst, SCR 3rd generation & Diesel particulate catalyst, Emission standard: Stage 5, Electronic engine control with Vistronic fan control, Engine speed memory, Powercore engine air filter with coarse dirt extraction, EasyCare cooler package, 280 liter fuel tank. Dcjdpfxew A Hgpe Agmek

Condition: used, Year of construction: 2023, operating hours: 458 h, power: 186 kW (252.89 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 458, First registration: December 17, 2024. Price: 175,900.00 Euro (net). Basic equipment/technical data: ENGINE: Max. power 180/245 kW/HP (ISO 14396), Max. torque 1100 Nm, Maximum power with power management 194/265 kW/HP, Max. torque with power management 1178 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, Electronic engine control with Vistronic fan control, Engine speed memory, Powercore engine air filter with coarse dirt extraction, EasyCare cooler package, Additional fuel pre-filter with water separator, 500 liter fuel tank. Dcjdpfx Agsvv Dp Nomek

Condition: used, Year of construction: 2021, operating hours: 230 h, power: 68 kW (92.45 HP), maximum speed: 40 km/h, front tire size: 380/70 R24 | 0%, rear tire size: 480/70 R34 | 0%, tire size: 480/70 R34, Tires (front): 380/70 R24, Tires (rear): 480/70 R34, Operating hours: 230, First registration: 15.12.2023. Machine with first registration: 12.2023. Operating hours: approx. 230. Standard equipment/technical data: Engine Rated power (ISO): 68/92 kW/hp Max. power: 70/95 kW/hp at 2000 rpm Max. torque: 355 Nm at 1600 rpm Dcsdpfozpcuyox Agmek Manufacturer/Type: Agco Power / AP 33 AWI Low-emission engine, 3 cylinders / 3.3 l, Stage V DOC & SCR, AdBlue tank with 15 L, without exhaust gas recirculation, without particulate filter Vertical exhaust: on the right side, in front of the cabin A-pillar Fuel tank capacity: 120 liters Transmission: 12/12-speed

Condition: used, Year of construction: 2023, operating hours: 950 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tire size (front): 600/70 R30, tire size (rear): 710/70 R42, operating hours: 950, initial registration: 12/19/2024. Price: 199,000.00 euros net. Initial registration: 12/19/2024. Operating hours: approx. 850. Standard equipment/technical data: ENGINE: Max. power 224/305 kW/HP (ISO 14396), max. torque 1280 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, electronic engine control with Vistronic fan control, engine speed memory, Powercore engine air filter with coarse dirt extraction, EasyCare radiator package, additional fuel pre-filter with water separator, 500-liter fuel tank. Djdpfew E N Tdjx Agmjck

Condition: new, MF-Inverter 1000Hz for resistance weldingmachines HWI 2806-2816 IQ Profil + HWS 2102 IQ Profil available from stock Dedpfx Agjyrx Nyemock

Condition: used, Year of construction: 2003, machine/vehicle number: MR2TTR23099, AVAILABLE from Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF - Two application units, one in REVERSE - Year of manufacture: 2003 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: right - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150 mm - Roller diameter: 100 mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. Dodpfx Agszmh Eromsck - Machine length: 1.640 mm - Machine width: 3.000 mm - Mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Application quantity ~ 4 - 50 g/m² - Machine weight 2.520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.5 W / 30 A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 6 h, load capacity: 3,400 kg, lifting height: 8,860 mm, fuel type: diesel, mast type: telescopic, construction height: 2,485 mm, empty load weight: 8,500 kg, total length: 5,440 mm, drive type: Diesel, construction width: 2,240 mm, Telescopic forklift rigid Mast type: Telescopic Technical condition: New Front tires size: 460/70 r 24 michelin xcml Rear tires size: 460/70 r 24 michelin xcml Dcedpjw Ir Injfx Agmjk

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools 20-position tool changer Fire extinguishing system Chiller Aluminum clamping plate, Erowa Documentation Dcodpfxozguk Us Agmsk Machine is connected and available for inspection.