Used Maka Pe 70 for sale (20,783)

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Ljdpsvr A A Tofx Amzshn Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Lhjdpfx Amezwcfzozjn Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, MAKA oscillating hammer drilling machine, slot drilling machine # TYPE STV 170 Year of manufacture: 1991 Includes 2 additional drilling units and a large amount of accessories, including stops, etc. Condition: see pictures (See pictures – as is) – a prior inspection is highly recommended. Subject to prior sale. All information without guarantee. The items can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. The shipping costs are an estimate and may vary depending on the distance and weight; please inquire. Lhjdoz Efwyspfx Amzsn The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) Lsdpfxszuw Ixj Amzshn - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, Foil Stamping & Embossing Machine Kolbus PE 70 with automatic Feeder and Pre-stacking conveyor. Heißfolienpräge- & Prägemaschine / Foil Stamping & Embossing Machine Kolbus PE 70 Baujahr / Year 1979 - Serial-No. 178 Open cover size  min.170 x 100mm - max. 660 x 405mm Printing surface 420 x 355mm Pressing power 35 tons Geschwindigkeit / Speed max. 70 cycles/min. Vorstapel Föderband / Case Pre-stacking conveyor Anleger für Buchdecken / Feeder for cases Deckenausbiege Station / Case bending station Folientransportvorrichtung / Foil transporting device Folienabwickelvorrichtung / Foil unwinding device Ljdpeydfwzjfx Amzshn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC-controlled machining center for 5-axis machining CNC control Control type: bwo CNC 900 C, 512 KB RAM, PC 80486, 1 GB HD Controlled axes Travel distances: 14000 x 3300 x 200 mm Units Type designation: Milling motor HSK 63F Cooling: Water cooling Power: max. 20 kW Speed range: 1000-17000 min-1 Lubrication: Grease lubrication for 2000 operating hours Tool holder: HSK 63F Type designation: Chain tool changer Number of positions: 32, of which 4 are equipped with a torque support for holding angle/probing heads Ljdpsy S Hahefx Amzjhn Holder: HSK 63F Diameter: 90 mm / arranged 160 mm Tool length: 160 mm Workpiece cube dimensions X-axis: max. 3300 mm Y-axis: max. 14000 mm Z-axis: 200 mm A-axis: +270° rotary axis B-axis: ±98° swivel axis

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Lodjv Rlpyspfx Amzohn Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. Lodpfx Amovmpx Rozjhn - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Ljdevmywqepfx Amzshn Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Ledpfsgiwl Dox Amzjhn Available immediately

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing system and its installation situation before dismantling and to document it for a later reinstallation. Technical data and equipment: • Large-area filtered supply air ceiling approximately 8,100 × 4,500 mm • Filter ceiling divided into two sections across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping Ledpfx Aoz Ikyromzjhn • Electrical system control / control cabinet • Cabin lighting • Sale includes the system as it currently exists on-site Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Its previous use included high-quality surface work, up to and including high-gloss coatings. An inspection of the still assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are to be carried out entirely by the buyer at his own cost and responsibility. The buyer must organize the necessary skilled personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical data has been compiled based on the available documentation, nameplates, and the current condition of the system. Information provided without guarantee. The condition and scope determined during inspection shall be decisive. Selling price: 25,000.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Year of construction: 1976, condition: used, Embossing machine Ljdpfszat H Aex Amzehn Kolbus PE - PE 70 Year: 1976 Tandem configuration consisting of 2 interconnected Kolbus PE 70 embossing machines. - Case pre-stacking conveyor - Case bending station: DBA - Foil transporting device - Case infeed 90° swivelling

Condition: good (used), Year of construction: 2007, Gebruikte pons knipmachine van Peddinghaus Lhjdpfjzul Adjx Amzon Type Peddimaster 110/170 Capaciteit ponsen 110ton Capaciteit knippen 170ton Inclusief zij aanslag en diverse gereedschappen

Condition: ready for operation (used), Year of construction: 2018, stroke length: 160 mm, table width: 4,325 mm, total height: 2,630 mm, overall weight: 33,000 kg, product length (max.): 2,750 mm, Mechanical stamping press manufactured in 2018. This PME PE 400-1700 C features a nominal pressing force of 4000 kN and a machine weight of 33,000 kg. It has a maximum ram adjustment of 180 mm and can accommodate tool dimensions of up to 1100 x 800 mm. If you are looking to get high-quality stamping capabilities, consider the PME PE 400-1700 C machine we have for sale. Contact us for further details. Lhodpfx Ae Adp E Semzen - Total Power: 50 kW- Voltage: 400 V- Frequency: 50 Hz- Basic Machine Position: Top Dead Center (O.T.)- Max. Engagements in Single Stroke: 15 /min- Max. Permissible Speed of Flywheel: 290 1/min- Max. Ram Adjustment: 180 mm- Stroke Height Min./Max.: 30 mm / 160 mm- Stroke Rate Min./Max.: 10 /min / 60 /min- Max. Shut Height : 660 mm- Max. Tool Dimensions (L x W): 1100 x 800 mm- Upper Tool Weight: 2400 kg- Lower Tool Weight: 2400 kg- Pneumatic System Pressure Min./Max.: 3.5 / 10 bar- Pneumatic Clutch-Brake Combination Pressure Min./Max.: 3.5 / 6 bar- Lubrication System Power: 1.0 kW- Lubrication Operating Pressure: 50 bar Technical Specification Stamping Force 4000 Kn

Condition: ready for operation (used), Year of construction: 2006, pressing force: 173 t, Press brake manufactured in 2006. This LVD PPEB 170/30 features a bending length of 3000 mm and a pressing force of 170 tons. If you are looking to get high-quality bending capabilities, consider the LVD PPEB 170/30 machine we have for sale. Contact us for further details. Technical Specification Ledsz R Dl Iopfx Amzshn Bending Length 3000 mm

Condition: used, Year of construction: 2008, machine/vehicle number: MC00094230, functionality: unexamined, input voltage: 400 V, Equipment: CE marking, Thickness planer MAKA / GRIGGIO DH 520/A Year of manufacture: 2008 Machine number: MC00094230 Condition: Uninspected Delivery terms: Free on truck Location: 72178 Waldachtal Availability: Immediately - by arrangement Payment terms: Prepayment - by bank transfer Internal No.: 180-2 Ledpfx Ajz Rqgxjmzshn Technical data: - Planing width approx. 520 mm - 400 V - 50 Hz - Max. 8.85 kW - Max. 2900 rpm Scope of delivery: - Without additional accessories Dimensions & weights: - Installation dimensions L x W x H approx.: 1300 x 800 x 1400 mm - Weight approx.: 785 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►On request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of all warranties. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: like new (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 00031444-ER, stroke length: 275 mm, throat depth: 410 mm, operating speed: 160 mm/s, reverse speed: 165 mm/s, table height: 900 mm, oil tank capacity: 150 l, overall weight: 4,320 kg, total length: 3,175 mm, total width: 2,100 mm, total height: 2,580 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 60 t, table length: 1,270 mm, Equipment: documentation/manual, Manufacturer: ERMAKSAN Model: Speed-Bend Pro 1270×60 Machine type: CNC Hydraulic Press Brake The ERMAKSAN Speed-Bend Pro 1270×60 is a high-precision CNC hydraulic press brake designed for accurate and efficient sheet metal bending. With a maximum bending force of 60 tons and a bending length of 1,270 mm, this machine is suitable for a wide range of industrial sheet metal processing applications. Technical Specifications Maximum bending force: 60 tons (600 kN) Maximum bending length: 1,270 mm Ram stroke: 275 mm Table height: 900 mm Table width: 90 mm Main motor power: 7.5 kW Power supply: 400 V, 3-phase, 50 Hz CNC control: Delem DA-66T (depending on machine configuration) Tool Clamping System: European-style tooling clamping system Side safety guards Foot control: Dual foot pedal Electrical system: Siemens Hydraulic system: Hoerbiger hydraulic system Controller: CYBELEC CYBTOUCH 15PS 2D Upper Tooling (Punch): Rolleri PS 135.85.R08 Lsdpfoz Slyqox Amzohn Machine available from January 16, 2027.

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU Lsdpfx Aozlulpsmzehn ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: ready for operation (used), Year of construction: 2021, operating hours: 6,274 h, controller manufacturer: DELEM, controller model: DA-66T, number of axes: 6, total height: 2,580 mm, pressing force: 6 t, product length (max.): 2,100 mm, This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details. • CNC axes: Y1, Y2, X, R, Z1, Z2 • Bending unit: • Max. approach speed: 160 mm/s • CNC backgauge: • CNC-controlled axes: X, R, Z1, Z2 • X-axis travel: 500 mm • X-axis speed: 500 mm/s • R-axis travel: 250 mm • R-axis speed: 350 mm/s • Servo-motorized CNC backgauge • X-axis servo motor with ball-screw drive • Z1 and Z2 CNC-controlled backgauge fingers • Backgauge positioning accuracy: up to 0.05 mm • Safety: • Side safety guards • Safety system for bending area • Tooling style: Amada (Promecam) • Electrical: • Main motor power: 7.5 kW Lhedpfx Asz A Aa Tsmzsn • Power supply: 400 V, 3-phase, 50 Hz • Nominal current: 18 A • Control voltage: 24 V Additional equipment • Segmented upper punch tooling • Multi-V lower die • Front sheet support table / support arms • Foot pedal control Technical Specification Bending Length 1270 mm

Condition: used, functionality: fully functional, Year of construction: 1989, control type: CNC control, bending force (max.): 400 t, working width: 8,000 mm, overall weight: 50,000 kg, Eccentric press from HACO, model PPES 70400, year of manufacture 1989. The machine has a nominal pressing force of approx. 400 tons and is suitable for various pressing and forming operations on sheet material. Equipped with a mechanical eccentric drive and robust construction, designed for industrial use. Suitable for production and assembly work in an industrial environment. Machine is offered in used condition. Lhjdoyhxtzjpfx Amzjn

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC-Steuerung Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Lsdpfjzc Dyrjx Amzohn Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm Lhodpfx Aoz Hmn Njmzen • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 • Retention knob: MAS-P30T-2 (30°) • Tool changer: 21-tool carousel, total load capacity 35 kg • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment • Hydraulic fixing table • Renishaw broken tool detector • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD

Condition: used, Year of construction: 2001, machine/vehicle number: 21012101, functionality: fully functional, operating hours: 49,849 h, input voltage: 415 V, input current: 36 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 2,250 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 420 kg, number of axes: 5, number of slots in tool magazine: 10, controller manufacturer: Siemens, actuation type: electric, total height: 4,000 mm, total length: 7,300 mm, total width: 7,000 mm, table length: 2,250 mm, table width: 1,500 mm, control voltage: 24 V, 5-axis CNC machining center for wood or plastic. The machine was used for contour milling of plastic components. It is equipped with an HSD spindle, and the tool holder is of the HSK63 type. Lhedpfozhtpfjx Amzon The machine can be purchased with or without an extraction system, depending on the intended application. The dimensions specified for the machine include the extraction system. An inspection of the machine is possible at any time; it is currently still in production.

Condition: ready for operation (used), Year of construction: 1995, input voltage: 400 V, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: BWO, MAKA HC 57 R (Robot) CNC Machining Center 5-Axis Type HC-57 R / Machine No. 420 747 / Year of manufacture 1995 / Circuit diagram no. 320 177 Ledoz R Dqqopfx Amzehn The machine is operational and exceptionally robustly constructed (milling spindle, tool changer, vacuum pump, support, etc.) and equipped with existing electronics (control unit, circuit boards, transformer). It shows age-related wear in areas such as wiring, pneumatic lines, central lubrication lines, etc. It runs and is ready for operation, but due to the above-mentioned wear, it is being offered as a source of spare parts or for refurbishment. Collection from 41334 Nettetal, workshop edge. Price negotiable. If no buyer is found for the assembled, complete machine, the machining center will be dismantled. The spare parts will then be offered individually. Interested parties in MAKA spare parts can contact us in advance regarding details or spare parts inquiries.

Condition: repair required (used), Year of construction: 1989, machine/vehicle number: 426578, functionality: unexamined, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: Num, total height: 3,000 mm, total length: 10,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, table length: 7,000 mm, table width: 2,000 mm, We offer this used MAKA KPF-6200 machining center, manufactured in 1989, as a source of spare parts. Type: KPF-6200 Machine No.: 426578 Year of manufacture: 1989 Pneumatic pressure: 6 - 8 bar Hydraulic pressure: 180 bar Rated voltage: 380 V Rated frequency: 50 Hz Control voltage: 24 V Rated power: 16 kW Rated current: 32 A Wiring diagram no.: 3.96 - 123 Condition: in need of repair (used) Functionality: untested Tool changer in need of repair without milling cutters Sold as a source of spare parts Lsdpfx Amoz Hlhnszshn The Num control unit with the switch cabinet is still functional. If you have any questions or require further information, please send us a message or call us.